共查询到20条相似文献,搜索用时 187 毫秒
1.
2.
建立了一个耦合高效配平策略和计算流体力学(CFD)技术的旋翼气动特性分析方法.采用CFD求解器进行雅克比矩阵和旋翼流场的计算,建立了一个包含直接配平法的旋翼气动特性分析平台;引入差量法思想对配平策略进行简化,发展了一种差量配平法,解决了直接配平法中雅克比矩阵计算效率低下的问题,显著缩短了计算时间.旋翼流场求解中控制方程采用Navier-Stokes方程,空间离散格式选取2阶迎风Roe格式,时间推进采用隐式lower-upper symmetric Gauss-Seidel (LU-SGS)格式,湍流模型为Baldwin-Lomax (B-L)模型.分别采用建立的基于直接配平方法和差量配平方法的气动特性分析平台对AH-1G和Helishape 7A直升机的旋翼进行了配平计算和研究,对比分析了两种配平方法的计算效率和精度及背景网格的网格量对配平结果的影响.结果表明:与直接配平法相比,耦合差量配平法的气动特性分析方法计算圈数更少,可节省至少60%的计算时间;使用疏化的背景网格虽然不利于捕捉流场细节,但是可以在兼顾配平结果准确性的同时,降低配平计算代价,提高旋翼配平和流场计算的效率. 相似文献
3.
基于直角坐标的在翼航空发动机风扇三圆配平方法研究 总被引:1,自引:0,他引:1
《燃气涡轮试验与研究》2015,(3):59-62
简要介绍了航空发动机三圆配平的基本方法,并在直角坐标系下推导了刚性转动系统的三圆配平法的基本原理,为解决涡扇发动机在翼风扇配平问题提供了理论支持。给出了直角坐标系下利用三圆配平方法计算风扇不平衡量的过程及结果,分析了三圆配平法适用对象及在涡扇发动机风扇配平中的实际应用。本研究成果能有效解决在翼涡扇发动机不具备现成配平条件,或具备现成配平条件但给出配平方案效果不佳时的风扇配平问题。 相似文献
4.
5.
6.
亚声速翼身融合无人机概念外形参数优化 总被引:3,自引:0,他引:3
为了兼顾翼身融合(BWB)布局无人机(UAV)的气动、隐身和结构重量要求,应用优化方法研究了某亚声速翼身融合无人机概念方案的外形设计问题。外形优化设计流程包括全机参数化几何外形模型、气动分析、机翼根部弯矩计算、雷达散射截面(RCS)分析、代理模型的建立和外形参数优化计算。选择了三种不同优化目标研究翼身融合无人机外形优化问题:①未配平状态升阻比最大;②配平状态升阻比最大;③配平状态升阻比尽量大和机翼弯矩尽量小。通过优化结果的对比分析,揭示了配平约束和机翼弯矩目标对优化设计结果的影响。研究结果表明:计入配平约束能够有效提高配平升阻比;将配平状态升阻比尽量大和机翼根部弯矩尽量小作为优化目标能够获得合理的优化外形。 相似文献
7.
为了能快速搜索到直升机定常飞行状态的最佳平衡点,在分析直升机飞行仿真系统模型的基础上,建立了满足配平问题的目标函数,提出了一种基于混合遗传算法的配平计算分析方法。旋翼气动模型集成了桨叶的挥舞运动、旋翼动态入流模型和非定常动态失速气动模型。以直升机整机动力学模型为基础,详细推导出协调转弯状态下的约束条件和配平控制量。以UH-60A直升机为研究对象,进行了协调转弯的全机配平计算,并与飞行试验数据进行了对比验证。结果表明:脚蹬配平值误差较大,造成误差的可能原因是尾桨倾斜的附加垂向力引起了纵向、横向和航向全耦合;其他配平结果与飞行试验数据吻合较好。 相似文献
8.
邓君香 《西安航空技术高等专科学校学报》2006,24(5):3-5
一些早期飞机没有装载配平软件,发动机现场配平困难,通过采取在发动机现场用试配平法的基本原理、操作步骤,配重大小和方向的计算方法,及在发动机风扇转子配平中的具体应用,证明了试配平法在发动机风扇转子配平中的应用是可行的、有效的,保证了发动机的正常使用和飞机的飞行安全。 相似文献
9.
10.
为了分析亚轨道飞行器发动机故障下配平能力,将配平能力问题转换为线性等式/不等式混合方程组相容性判定问题。提出了将基于顶点投影法的相容性判定方法用于配平能力分析,验证了方法的准确性与计算效率。在故障下配平能力分析的总体框架下,分别对不同故障模式下故障发生时刻、整个空域配平能力进行分析,给出了配平能力不足时的应急策略。仿真结果表明,该方法能够快速地计算故障下不可配平区域、分析配平能力对可飞区域的影响,对故障后任务中止策略、任务中止轨迹优化等研究具有重要的参考价值。 相似文献
11.
针对由薄壁构件相似模型试验结果预测原型动力学特性的问题,建立了统一的数学模型,并基于方程分析法推导了动力学相似关系.通过对薄壳单元进行受力分析,推导得到薄壁构件的微分方程,并通过微分方程得到完全几何相似模型可准确预测原型动力学特性的相似关系.在建立薄壁构件结构参数对固有频率的敏感性与相似因子指数的比值关系基础上,提出薄壁构件不完全几何相似模型与原型的动力学相似关系(即畸变相似关系)的确定方法.最后给出基于敏感性分析的薄壁构件精确畸变相似关系设计流程,为薄壁构件相似试验模型的设计及动力学特性的预测提供参考. 相似文献
12.
现存有许多种关于预测夹层结构在承受压缩/弯曲载荷时屈曲临界值的理论模型。在这些模型中,鲜有研究者在模型中考虑面板在屈曲过程中横向剪切所造成的影响。除此之外,现存屈曲公式的特点为:经典公式形式简单但精度低、适用范围小;一些模型精度高但形式复杂,不便于直接工程应用。因此,首先建立了一种基于弹性理论求解屈曲问题的新理论模型,模型中引入了面板的横向剪切效应并评估了剪切效应对屈曲载荷造成的影响。然后,通过在不同屈曲波长范围内对精确解进行简化,建立了在不同屈曲波长范围内的近似解模型,并评估了近似解的精度和适用范围。最后,建立了一个新的夹层结构屈曲失效判定准则,新准则具有更高的精度且形式简洁,易于工程应用。 相似文献
13.
《中国航空学报》2020,33(7):2070-2087
To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure (MMF) theory, clustering method is used for the extraction of amplification factors. As the clustering method is a kind of unsupervised machine learning method, the elements with similar mechanical behavior under external loading can be included in a cluster automatically at the microscale. With this modification, the fiber random distribution model can be used for multiscale damage analysis in the framework of MMF theory. To validate the modified multiscale analysis method, progressive damage analysis of a kind of 2D twill woven composites is conducted based on different microscale models. The stress values for microscale models with fiber hexagonal and random distribution patterns are compared first. Much higher stress concentration is generated in the fiber random distribution model due to the smaller inter-fiber distance especially under longitudinal shear loading. The obtained cluster distribution results exhibit the characters of the stress distribution in the two microscale models. Thereafter, tensile and compressive responses of the 2D twill woven composite are predicted with the modified multiscale analysis method and accuracy of the method is verified through comparison with published experimental results. From the simulation results, it can be found that the matrix damage initiation from the model based on the fiber random distribution model is premature compared with that from the model based on the fiber hexagonal distribution model. Besides, under tensile loading, the damage all initiates from the fill tows and propagates to the wrap tows. However, under compressive loading, the matrix damage initiates from the wrap tows in the model based on the fiber random distribution model. 相似文献
14.
15.
16.
17.
变频电机系统能耗分析需要对系统各环节建立准确的损耗计算模型。针对目前有限元模型建模繁琐、计算量大的现状,在考虑了变频电源谐波对铁耗电阻影响的基础上,建立了计及铁耗等效电阻的异步电机数学模型及PWM变频器主电路损耗模型,提出一种基于MATLAB/Simulink的变频电机系统实用模型,实现了变频电机系统各环节损耗准确分析。通过对不同工况下变频器、电机和系统总效率的仿真分析,揭示了传统忽略变频器能耗的损耗分析方法对系统最佳运行点估算存在一定误差。为了验证模型正确性,对一组5.5 kW变频电机系统进行了试验对比,验证了文中模型能够正确有效地模拟变频电机系统运行。研究成果为进一步研究系统能耗最优控制策略提供了重要理论支撑。 相似文献
18.
Mauro Messerotti Francesca Zuccarello Salvatore L. Guglielmino Volker Bothmer Jean Lilensten Giancarlo Noci Marisa Storini Henrik Lundstedt 《Space Science Reviews》2009,147(3-4):121-185
Key drivers of solar weather and mid-term solar weather are reviewed by considering a selection of relevant physics- and statistics-based scientific models as well as a selection of related prediction models, in order to provide an updated operational scenario for space weather applications. The characteristics and outcomes of the considered scientific and prediction models indicate that they only partially cope with the complex nature of solar activity for the lack of a detailed knowledge of the underlying physics. This is indicated by the fact that, on one hand, scientific models based on chaos theory and non-linear dynamics reproduce better the observed features, and, on the other hand, that prediction models based on statistics and artificial neural networks perform better. To date, the solar weather prediction success at most time and spatial scales is far from being satisfactory, but the forthcoming ground- and space-based high-resolution observations can add fundamental tiles to the modelling and predicting frameworks as well as the application of advanced mathematical approaches in the analysis of diachronic solar observations, that are a must to provide comprehensive and homogeneous data sets. 相似文献
19.
数据通信模式及其在面向对象的航空发动机性能仿真系统中的应用 总被引:3,自引:2,他引:1
本文在分析了航空发动机的仿真原理及实现数据共享的几种方法后, 提出了端口字典的概念。分析比较了在不同通信模式下建立的航空发动机仿真系统的优缺点。结果表明建立在端口字典加双端口 /连结器通信模式基础上的仿真系统具有逻辑清晰、使用简单的优点, 简化了编程, 节约了时间, 提高了仿真模型的可靠性, 并且更具可扩展性。 相似文献
20.
A methodology for determining priorities in allocating test resources among the various subsystems within a large system is described. The methodology is based on concepts from applied decision theory. Two versions of the methodology are presented: a complete version, called the extensive form, and an approximate version, called the diminutive form. 相似文献