Performance simulation of high altitude scientific balloons

The design and operation of a high altitude scientific balloon requires adequate knowledge of the thermal characteristics of the balloon to make it safe and reliable. The thermal models and dynamic models of altitude scientific balloons are established in this paper. Based on the models, a simulation program is developed. The thermal performances of a super pressure balloon are simulated. The influence of film radiation property and clouds on balloon thermal behaviors is discussed in detail. The results are helpful for the design and operate of safe and reliable high altitude scientific balloons.     

Ballooning activities in Japan

The Scientific Balloon Center of ISAS/JAXA has carried out two balloon campaigns at Sanriku, Iwate, Japan every year. Ten to twelve balloon vehicles are launched annually for scientific and engineering experiments. Since 2005, a Brazilian balloon campaign has also been conducted in cooperation with INPE. In the 2006 Brazilian campaign, large and heavy payloads up to 1500 kg for astronomy will be launched. New generation balloons, such as super-pressure balloons and high-altitude balloons with ultra-thin films, are being developed. The current status and prospect of the Japanese scientific ballooning are discussed.     

A new polyethylene balloon film

After over twenty years there is a new film introduced in the United States for fabricating scientific balloons. The film was developed by Raven and is designated Astrofilm.The film is a result of a critical selection of both the resin and extruding parameters. The film's physical properties and results of a test flight are reported. Also reported are a proposed design modification and failure analysis.     

Scientific ballooning in India – Recent developments

Established in 1971, the National Balloon Facility operated by TIFR in Hyderabad, India, is a unique facility in the country, which provides a complete solution in scientific ballooning. It is also one of its kind in the world since it combines both, the in-house balloon production and a complete flight support for scientific ballooning. With a large team working through out the year to design, fabricate and launch scientific balloons, the Hyderabad Facility is a unique centre of expertise where the balloon design, research and development, the production and launch facilities are located under one roof. Our balloons are manufactured from 100% indigenous components. The mission specific balloon design, high reliability control and support instrumentation, in-house competence in tracking, telemetry, telecommand, data processing, system design and mechanics is its hallmark. In the past few years, we have executed a major programme of upgradation of different components of balloon production, telemetry and telecommand hardware and various support facilities. This paper focuses on our increased capability of balloon production of large sizes up to 780,000 m³ using Antrix film, development of high strength balloon load tapes with the breaking strength of 182 kg, and the recent introduction of S-band telemetry and a commandable timer cut-off unit in the flight hardware. A summary of the various flights conducted in recent years will be presented along with the plans for new facilities.     

Venus atmospheric platform options revisited

Various balloon systems intended as scientific platforms to float in the atmosphere of Venus at altitudes between about 35 and 65 km are briefly reviewed. Previous predictions of the altitude oscillations of balloons filled with helium gas and water vapor are largely confirmed through numerical simulation and analysis. The need for refined thermal modelling is emphasised. Several novel technical concepts are introduced. It is concluded that phase change balloons would be more suitable than non-condensing super pressure gas balloons when repeated altitude excursions are a mission requirement.     

Scientific ballooning in Japan

Activities in scientific ballooning in Japan during 1998–1999 are reported. The total number of scientific balloons flown in Japan in 1998 and 1999 was sixteen, eight flights in each year. The scientific objectives were observations of high energy cosmic electrons, air samplings at various altitudes, monitoring of atmospheric ozone density, Galactic infrared observations, and test flights of new type balloons. Balloon expeditions were conducted in Antarctica by the National Institute of Polar Research, in Russia, in Canada and in India in collaboration with foreign countries' institutes to investigate cosmic rays, Galactic infrared radiation, and Earth's atmosphere. There were three flights in Antarctica, four flights in Russia, three flights in Canada and two flights in India. Four test balloons were flown for balloon technology, which included pumpkin-type super-pressure balloon and a balloon made with ultra-thin polyethylene film of 3.4 μm thickness.     

Balloon materials and designs

Improvements of materials can extend the performance of scientific balloon flights in altitude, suspended load and duration. The impact of new materials is considered in the design of superpressure balloons for long duration improvement, ultra light weight for sounding balloons, and a launch technique for minimizing relative wind problems.     

PEGASO: An ultra light long duration stratospheric payload for polar regions flights

Stratospheric balloons are powerful and affordable tools for a wide spectrum of scientific investigations that are carried out at the stratosphere level. They are less expensive compared to satellite projects and have the capability to lift payloads from a few kilograms to a couple of tons or more, well above the troposphere, for more than a month. Another interesting feature of these balloons, which is not viable in satellites, is the short turnaround time, which enables frequent flights.     

Un dispositif experimental utilisant des ballons plafonnants pour l'etude de la couche limite atmospherique

This paper presents a new system of constant volume balloons used to study the dynamical and thermodynamical properties of the tropospheric boundary layer. The system allows to simultaneously localize up to 30 balloons and to observe thermodynamical characteristics of the air during their flight inside the boundary layer. Each balloon is equipped with a radar reflector and a sounding system giving information each second on pressure, humidity and temperature by sequential emissions which are received at a ground station. The trajectories of balloons are obtained by a non-tracking S-band radar where a special hardware processing unit allows to real time cancellation of most ground clutter. A complete set of the balloons positions is obtained every two or three minutes.The system was tested in October 1984 during a field experiment in the south of France. Results of the experimental procedure and of the quality of the balloon, radar and sounding capabilities are given. The scientific use of constant volume balloons in order to study the atmospheric boundary layer is examined.     

Balloon film strain measurement

In order to understand the state of stress in scientific balloons, a need exists for the measurement of film deformation in flight. The results of a flight test program are reported where material strain was measured for the first time during the inflation, launch, ascent and float of a typical natural shape, zero pressure scientific balloon.     

A new balloon base in Japan

Since 1971, numerous balloons have been launched from the Japanese balloon base, the Sanriku Balloon Center (SBC). Through these years, balloon technologies have been developed continuously and many scientific achievements have resulted. Recently, however, because of the limited area of the launching pad of the SBC, we have been faced with the difficulty of safely launching large balloons. To solve this issue, we decided to move the balloon base from the SBC to the Taiki Aerospace Research Field (TARF) in northern Japan. The TARF had an existing huge hanger and a paved launch pad capable of being utilised for balloon operations. To evolve the TARF into a new balloon base, new balloon facilities have been constructed at the TARF and equipment was transferred from the SBC to the TARF during July 2007 and March 2008. The SBC was closed in September 2007, and the new base became operational in May 2008. The new base at the TARF is designed to launch larger balloons with greater safety and to perform balloon operations more effectively than ever before. In the summer of 2008, we carried out the first series of the balloon campaign at the TARF, and succeeded in two engineering flights of stratospheric balloons. By the success of these flights, we have verified that the whole system of the new balloon base is well established.     

Balloon research and cooperative programmes

Scientific ballooning as well as the use of balloons for operational projects, deserves and indeed enjoys a high degree of attention in developing countries. Balloon projects are in most cases relatively inexpensive and - besides the scientific merits in their own realm - lend themselves also as “training” projects for larger space programmes. An important aspect of scientific ballooning is the necessity of cooperation, in many cases on an international scale. Examples for these are given and the relevance of balloon projects for developing countries are discussed.     

Balloon observations of temporal and spatial fluctuations in stratospheric conductivity

The first campaign of the Polar Patrol Balloon (PPB) experiment (1st-PPB) was carried out at Syowa Station in Antarctica during 1990–1991 and 1992–1993. Based on the results of the 1st-PPB experiment, the next campaign (2nd-PPB) was carried out in the austral summer of 2002–2003. This paper will present stratospheric conductivity results from the 2nd-PPB experiment. In that experiment, three balloons were launched for the purpose of upper atmosphere physics observation (three balloons). Payloads of these three flights were identical with each other, and were launched as close together in time as allowed by weather conditions to constitute a cluster of balloons during their flights. Such a “Balloon Cluster” is suitable to observe temporal evolution and spatial distribution of phenomena in the ionospheric regions and boundaries that the balloons traversed during their circumpolar trajectory. More than 20 days of simultaneous fair weather 3-axis electric field and stratospheric conductivity data were obtained at geomagnetic latitudes ranging from sub-auroral to the polar cap. Balloon separation varied from ∼60 to >1000 km. This paper will present stratospheric conductivity observations with emphasis on the temporal and spatial variations that were observed.     

Scientific ballooning in Japan – An over view of recent activities

Current status of scientific ballooning in Japan is reviewed. First, I describe successful application of balloon technologies to construct a vessel of transparent plastic film, to contain about 1000 tons of liquid scintillator in Kamioka Liquid Scintillator Anti-Neutrino Detector (KamLAND). KamLAND is a project to study neutrino oscillation phenomena, by detecting anti-neutrinos produced in distant nuclear reactors. Next, I describe high altitude balloons developed by the ISAS balloon group. They developed balloons made from ultra-thin polyethylene film, producing a balloon of volume 60,000 m³ which successfully reached an altitude of 53 km in 2002. This is a world record, the greatest altitude that a balloon has ever achieved. ISAS is applying further effort to develop balloons with even thinner films, to achieve a higher altitude than 53 km. Other recent activities by the ISAS balloon group are briefly described.I also review scientific ballooning projects now operating in Japan, particularly focusing on the Balloon-Borne Experiment with a Superconducting Spectrometer (BESS) program. This is a US–Japan collaborative program that has carried out very precise measurements of antiprotons, protons and other components in primary cosmic rays, as well as measuring the fluxes of atmospheric muons and other components. The results of these observations give us important information to improve our understanding of the production mechanism of antiprotons observed in the primary cosmic rays. The data are also important for analysis of atmospheric neutrino events observed by Super-Kamiokande and other ground-based neutrino detectors. Future prospects of BESS and other balloon-borne cosmic-ray research programs are also presented.     

Advances in long duration,high altitude flights

During the past two decades there have been many significant advances made in the state-of-the-art of scientific ballooning. High altitude long duration flights, of moderate to heavy payloads, however, have proven to be the one requirement of the scientific community that has been the most difficult to meet. Conventional and cryogenic ballasting systems, super pressure balloons and hybrid balloon systems are some of the approaches that have been taken to maintain experiments at altitude for extended periods of time. The results of those development efforts and various methods of data retrieval will be discussed.     

Transient thermal behavior of stratospheric balloons at float conditions

The prediction of the thermal behavior of stratospheric balloons under varying environmental conditions is one of the key issues in the design and flight test of balloons. In this paper, a three-dimensional transient thermal model is developed to predict the thermal behavior of spherical stratospheric balloons. The diurnal variations of the skin and lifting gas temperatures at float conditions are discussed in detail. The further studies on the thermal behavior of stratospheric balloons are presented also.     

An improved shape for zero-pressure balloons

Since the 1950s, efforts have been made to optimise the design of zero-pressure balloons. A possible method for improving on the classical natural-shape is discussed in this paper.It is shown by surface element analysis, that the meridional stress in the balloon film can be adjusted by changing the circumferential stress. It is probable that the stress concentration at the top of a natural-shape balloon can be reduced. A mixed-shape balloon, which has positive circumferential stress above the maximum diameter, has been derived and the results are presented in a form similar to Smalley's ‘sigma’ table.The stress distribution for balloons having different shapes, with or without load tapes, are also described.     

Mechanical properties of ANTRIX balloon film and fabrication of single cap large volume balloons

The zero pressure plastic balloons used for high altitude studies are generally made from polyethylene material. Tensile properties of the thin film polymer are the key parameters for material selection due to extremely low temperature of −90 °C encountered by the balloons in the tropopause region during the ascent at equatorial latitudes. The physical and structural properties of the material determine the uniformity of the stress distribution over the entire shell. Load stresses from the suspended load propagate via load tapes heat sealed along with the gore seals as per the balloon design. A balance between this heat seal strength and the film strength is a desirable property of the basic resin in terms of the bubble strength, gauge uniformity, and long-term storage properties. In addition, the design of the top shell of the balloon and its stress distribution play an important role since only a fraction of the balloon is deployed during the filling operation and the ascent. In this paper we describe the mechanical properties of the ‘ANTRIX’ film developed by us and the optimized design of single cap balloons, which have been successfully used in our experiments over the past 5 years.