低轨卫星多普勒频移特性的快速计算

地面站利用低轨卫星进行通信时,地面接收站接收信号存在明显的多普勒频移现象。为描述多普勒频移特性,首先分析卫星轨道偏心率对多普勒特性曲线的影响,分析表明：轨道偏心率越大,地面站接收信号多普勒变化率越大。其次,推导了卫星多普勒频移的计算表达式,并讨论了低轨卫星多普勒频移特性曲线的快速计算。仿真计算结果表明,该算法可以很好地描述任意低轨道卫星多普勒频移特性,并明显缩短了精确算法的计算时间,对于10 000km轨道高度卫星,算法置信度可达99%以上。     

柔性天线面对漂浮基星载天线扰动分析及抑制

 为了研究柔性天线面弹性变形对漂浮基星载天线的扰动,采用固定界面模态综合法和Lagrange方法,通过轴末端与天线面交界面的协调关系,推导了大范围运动的星载天线刚柔耦合动力学模型,其所建立的动力学模型计算效率高并具有足够的精度。分析了柔性天线面弹性变形对星载天线的扰动,利用PD+振动力反馈控制抑制系统振动,并基于Lyapunov方法证明了控制系统的渐近稳定性。仿真结果表明：天线工作过程激起了柔性天线面弹性振动,进而引起星载天线的抖动,严重影响了星载天线的指向精度;利用其控制策略能快速抑制系统振动。结论对天线指向精度的分析与控制具有重要的理论价值及工程实际意义。     

一种基于信道模拟的测速精度评估方法

为了评估单向多普勒测速动态测量精度,构建了一种基于卫星信道模拟器的测速精度评估系统,通过在卫星信道模拟器装订卫星飞行轨迹,利用卫星信道模拟器对上行信号加入传播时延、多普勒频率,对卫星在轨飞行状态下的单向多普勒测速进行场景仿真,并对场景仿真获取的测速数据进行O-C残差序列分析,得到动态测量条件下的测速精度。给出了O-C残差序列的计算方法,分析了单向多普勒测速体制下时钟偏差对测速结果的影响,并给出了一种简单的时钟误差修正方法。     

Analytic study of Doppler-based handover management in LEO satellite systems

The problem of dynamic handover management in low Earth orbit (LEO) satellite systems is addressed. Particularly, an analytical study of a newly proposed method for handover management, called dynamic Doppler-based handover prioritization scheme (DDBHP), is presented. DDBHP utilizes Doppler shift monitoring of each communicating user terminal onboard the satellite and geometric characteristics to accurately predict the handover load. As a result, handover requests are more effectively managed, resulting in an improved performance in terms of blocking and forced termination probabilities. Moreover, by supporting guaranteed handovers, DDBHP can be used to provide QoS to users of future broadband satellite networks. An extensive mathematical model that justifies Doppler shift monitoring is presented along with a detailed queueing model used not only to evaluate DDBHP performance but also to provide a methodology for associating DDBHP operational parameters with desired performance. Comparison of analytical and simulation results validate the proposed model.     

Satellite Broadcasting of WWV Signals

An experiment concerning the broadcasting of time and frequency information from geostationary satellites is discussed. Included are discussions on satellite motion, time delay, Doppler shift, and delay calculations. Ground station requirements, time recovery techniques, and timing resolution and accuracy are also included. Delay computation aids for the user were designed to provide free space delays between the master clock and the user. Measurements made in North and South America demonstrated a timing resolution of about 10 ?s and an accuracy of 25 ?s.     

星载AIS收发机的关键技术初探

研究了现有的VHF频段的船用自动识别系统在超小或微型卫星应用中的若干关键技术。阐述了大气层、降雨、多径失真、多普勒频移对星载AIS通信的影响,接收到的星载AIS信号的载噪比以及星上天线的设计等。研究结果表明,多普勒频移对于星载AIS通信的影响是最主要的,而大气和气侯情况对星载AIS通信的影响则较小。     

Nontracking antenna performance for inertially controlled spacecraft using TDRSS

A series of tests to validate an antenna pointing concept for spin-stabilized satellites using a data relay satellite is described. These tests show that proper antenna pointing on an inertially stabilized spacecraft can lead to significant access time through the relay satellite even without active antenna pointing. We summarize the test results, the simulations to model the effects of antenna pattern and space loss, and the expected contact times. We also show how antenna beam width affects the results.     

Performance evaluation of digital beamforming strategies for satellite communications

Smart antennas are becoming one of the promising technologies to meet the rapidly increasing demands for more capacity of satellite communication systems. A main component in a smart antenna system is beamforming. Because of the limitations of analog beamforming, digital beamforming will be employed in future satellite communication systems. We evaluate the performance of various digital beamforming strategies proposed in the literature for satellite communications: 1) single fixed beam/single user, 2) single fixed beam/multiple users, 3) single adaptive beam/single user, and 4) single Chebyshev dynamic beam/multiple users. Multiple criteria including coverage, system capacity, signal-to-interference-plus-noise ratio (SINR), and computation complexity are used to evaluate these satellite communication beamforming strategies. In particular, a Ka-band satellite communication system is used to address the various issues of these beamforming strategies. For the adaptive beamforming approach, subarray structure is used to obtain the weights of a large 2D antenna array, and a globally convergent recurrent neural network (RNN) is proposed to realize the adaptive beamforming algorithm in parallel. The new subarray-based neural beamforming algorithm can reduce the computation complexity greatly, and is more effective than the conventional least mean square (LMS) beamforming approach. It is shown that the single adaptive beam/single user approach has the highest system capacity.     

Radar Altimeter Optimization for Geodesy Over the Sea

The optimum processor and its accuracy limit for radar altimetry for geodetic use over the sea are studied with a model accounting for random surface reflectivity, sea height variation, additive noise, and pointing errors, and allowing for arbitrary antenna patterns, signal modulations, and other system parameters. The ?threshold? case solution (which can have any specified accuracy) dictates a signal modulation bandwidth just shy of resolving the sea height variation and/or illuminated sea area (as scaled into time delay and ?smeared? by pointing errors). For such a modulation a relatively complete solution is obtained. These results are used to determine practical radar altimeter designs, additionally accounting for antenna size, stability, and peak power restraints. Conditions allowing neglecting of limiting or complicating effects due to temporally varying reflectivity, sea height, and vehicle position are given and shown to be satisfied for a typical satellite.     

Low-cost ground-to-ground mobile telemetry link

A frequency modulated UHF telemetry link giving 5 MHz of baseband capacity with carrier to noise ratio exceeding 30 dB is described. The system is intended for ground mobile use and provides more than 1 km of coverage also in moderately obstructed terrain indicating allowable maximum path loss up to 110 dB. The mobile transmitter end uses a sturdy flexible antenna. Typical sensor signals include voltage outputs from accelerometers, strain gauges, and thermistors, but live broadcasting-quality television is also easy to implement. Digital interfacing is accomplished through suitable D/A converters, multiplexers, and coders. Both the transmitter and receiver utilize commercial-off-the-shelf building blocks in order to keep the total cost within acceptable limits.     

基于VLBI的上行组阵标校技术研究

天线组阵能否完全替代大口径天线有一个关键性难题,就是天线阵是否支持上行链路组阵。深空航天器无法将不同地面天线的上行信号对齐,所以上行链路信号的调整必须在地面完成。针对上行组阵发射机相位调整问题,提出一种基于VLBI(Very Long Baseline Interferometry,甚长基线干涉测量)技术的接收模式天线上行组阵标校方案,并对标校精度进行了简要分析。将上行链路时延分解为几何时延和发射系统时延,建立了几何时延模型,通过标定接收时延和发射时延,便可以得到天线阵元间的相位标校值。理论分析结果表明,该方案具有一定的可行性,对上行组阵相位标校的研究具有一定的借鉴意义。     

Cross-Correlation Interference Effects in Multiaccess Optical Communications

The effects of the cross correlation between user codes in an opticalcode-division multiple-access communication system are investigated. The system model is a multiaccess satellite repeater in which the uplink and downlink channels are direct-detection, optical-polarization modulation links. The error probability is derived in terms of the cross correlation between the intended and interfering user codes. It is shown that the system error rate can be minimized by using code sequences in which the normalized second moment of the cross correlation between codes is small. The signalto- noise ratio (SNR) on the uplink is shown to be proportional to 1/K while the SNR on the downlink is proportional to 1/K1/2, where K is the number of users which are simultaneously accessing the system.     

机载卫星通信天线引导概率分析

针对某机载Ka频段卫星通信天线的使用环境,论述其天线角跟踪系统在捷联航姿设备引导下,天线主波束指向卫星目标位置的概率,分析影响天线角跟踪系统引导概率的主要因素,通过消减系统中大误差源保证了天线引导概率,通过扩展主波束指向空域提高了目标落入概率。计算数据和试验验证表明,给出的分析方法可行,设计策略有效。     

弹载天线旋转对接收信号多普勒偏差的影响

由弹体自旋产生的弹载天线的旋转是引起地面测控站多普勒测速误差的一个重要因素.根据线极化信号接收原理,对弹载天线旋转条件下接收的左旋和右旋信号多普勒偏差进行了理论推导和分析.分析结果表明：左/右旋接收信号将产生幅度相等、极性相反的多普勒偏差,多普勒偏差的均值与弹载天线旋转速率在数值上相等,多普勒偏差的方差随着目标视线与天线转轴之间夹角的增大而增大.为验证理论分析结果,开展了天线转台模拟实验,实验测量得到的多普勒偏差的均值和方差与理论分析结果基本一致.最后,根据理论分析和模拟实验结果,提出在实际任务中,可采用左旋和右旋多普勒偏差均值差的一半分别对左/右旋信号的多普勒进行补偿,以减小弹载天线旋转对测速精度的影响.     

A satellite interference location system using differential timeand phase measurement techniques

The design and development of a system for inferring the position of terrestrial satellite uplink stations using existing domestic satellites with minimal disruption to normal satellite operation are described. Two methods are presented by which a quantity measured at a terrestrial receiving site is mapped into a curve of possible uplink locations on the Earth's surface. One method involves measuring differential time delays of a single uplink signal observed through two adjacent spacecraft. The other uses a short baseline interferometer composed of the two cross-polarized and spatially separated antenna feeds aboard an affected satellite. A unique location is obtained by using an appropriate combination of the two methods. A system for measurement of the required differential delays and phases and experimental work performed to demonstrate the feasibility of the location methods are described     

中继卫星复合控制系统设计

根据中继卫星系统多体控制的特点，合理地选择了中继卫星复合控制系统方案；然后根据所选择的方案，分别设计了中继卫星星体姿态稳定控制系统和单址天线指向控制系统，详细描述了天线指向控制概念，并且设计了星上自主控制方案；最后以不同的用户星作为跟踪目标，对所设计的复合控制系统进行了数学仿真。通过对仿真结果的分析，验证了该系统的有效性。     

Quick position determination using 1 or 2 LEO satellites

We describe an approach for a medium accuracy position determination of a user terminal (UT) on the Earth surface, using one or two low Earth orbit (LEO) satellites. The positioning approach is intended to meet the requirements of a worldwide personal communications system using LEO satellites. The basic two requirements are: (1) immediate positioning, and (2) horizontal position accuracy of the order of 10 km. Those requirements stem from the need of the system to know the user's approximate location before it connects his call. The approach makes use of the two-way communication with the UT, which can receive, transmit, and make its own measurements. Delay and Doppler measurements are used in order to enable instantaneous positioning with one satellite, and in order to achieve unambiguous positioning with two satellites. A simplified Globalstar satellite constellation and the expected Globalstar delay and frequency measurement accuracy are used to demonstrate the concept and to evaluate its performances     

Maritime Communications via Satellites Employing Phased Arrays

This paper examines the feasibility of providing maritime mobile telecommunications as a new service via satellites. A global system with a capacity of 10 duplex voice/data channels (plus an interrogation/reply channel) per satellite is described. The capability is achieved with a 0-dB gain UHF antenna in the ship and a UHF phased array in the satellite, which produces 11 steerable beams, each with 30-dB peak gain. The links between satellite and shore are assumed to be at SHF. A dedicated satellite weighs 320 kg, which can be launched with an up-rated Thor-Delta. The prime power requirement of 730 watts is provided by an oriented solar array.     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.     

深空探测多天线组阵的增益损失研究

为定量分析上行天线组阵增益损失的影响因素,提出一种通过建立数学模型分析合成损耗的估计方法.首先基于天线原理和电磁波传输理论建立了天线组阵上行链路信号的数学模型,以统计学理论对数学模型进行分析,得到了影响上行链路信号的若干因素.通过分析得出,深空探测信号在远距离传输中因大气相位扰动引起的误差是造成天线组阵增益损失的最主要因素.再通过对大气相位扰动误差的进一步分析,构建S频段和X频段下大气相位扰动的空间自相关模型和时间自相关模型,得到组阵基线长度和工作仰角同合成损耗的关系.经过对各误差源的分析可知,在目前的技术水平下,能够满足上行天线组阵工程应用的精度要求.