共查询到20条相似文献,搜索用时 140 毫秒
1.
国外主要通信卫星技术计划及其进展 总被引:1,自引:0,他引:1
近年来,国外通信卫星技术有了长足的发展,无论是在军事还是商业领域都不断有新型高质量、大功率、长寿命的卫星发射升空。目前国外最先进的通信卫星技术仍掌握在包括波音、洛马、劳拉、休斯以及阿尔卡特等美国和欧洲的几大卫星制造商手中。欧洲正在通过研制开发新一代大型通信卫星平台阿尔法舱缩短与美国存在的差距。俄罗斯则是通过与欧洲和日本的国际合作来大力推进本国通信卫星技术的进步。 相似文献
2.
本文针对我国下一代大型通信卫星公用平台新的要求,通过综合总体技术设想,在结构构型、分舱、大型中心承力筒及结构舱板设计、舱段间及板间连接方式等方面对我国未来大型通信卫星公用平台结构分系统的设计特点进行了介绍。 相似文献
3.
4.
5.
6.
7.
8.
9.
欧洲通信卫星公司和卫星建造方泰雷兹·阿莱尼亚空间公司10月29日称,此前一天发射的欧洲通信卫星公司W3B卫星在发生严重氧化剂泄漏后已被宣布为全损。尽管卫星已投保,但消息公布后, 相似文献
10.
"空间客车"(Spacebus)是原法国宇航公司(现泰雷兹·阿莱尼亚空间公司)自上世纪80年代开始研制的一个静地通信卫星系列平台的名称,目前在泰雷兹公司的戛纳一曼德留航天中心生产。该系列平台可配备不同的有效载荷,但绝大多数用于建造通信卫星,典型轨道为静地轨 相似文献
11.
适用于30cm离子推力器的5kW电源处理单元设计 总被引:3,自引:1,他引:2
为了满足更大范围的卫星应用需求,我国正在研制30cm离子推力器。30cm离子推力器瞄准全电推进卫星平台、近深空探测器对推进任务的需求,对提高卫星平台先进性和提升国际竞争力具有重要的意义。为了配合30cm离子推力器的研制,同时设计了输出功率达到5kW的电源处理单元。该设计实现了一种输出功率为1kW的模块,通过串联组合可以达到输出5kW功率要求,提出了一种"最佳"的平顶变换及软开关的全桥电路拓扑,达到了95%的转换效率,同时还能容易实现屏栅电源的N+1冗余设计。并且通过高压组件的完全灌封,有效提高产品的可靠性。 相似文献
12.
13.
14.
卫星平台总体结构的要求是自身重量轻,承载能力强,与推进剂燃料贮箱是相同的,如果能把推进剂燃料贮箱作为卫星平台的结构承力件使用,无疑会使卫星平台的结构重量减轻.为此,提出一种卫星平台承力结构件的表面张力贮箱方案.针对采用承力式表面张力贮箱的卫星平台承力结构方案进行了基本的受力分析.通过实例计算证明了承力式表面张力贮箱的适用性. 相似文献
15.
16.
Walter L. Morgan 《Acta Astronautica》1983,10(11):753-757
This paper examines the economics of a very large satellite in geostationary orbit. Present day charges for satellite transponders are used to show that the seemingly high cost of this type of platform is rapidly repaid. Several orbit locations are selected on the basis of current usages and a satellite is configured with the power and mass requirements identified. Costs for the total space segment of a large platform are extrapolated using established cost histories of both satellites and launch vehicles. It is shown that the original investment is repaid in less than three years. After this time, the platform continues to earn revenue. 相似文献
17.
18.
为获取航天器准确的发射及在轨力学环境数据,设计了一套具有数据采集、存储和传输功能的星载测量系统。利用该系统对某大型平台卫星发射飞行过程进行了测量,获取了星箭界面及卫星结构典型位置在发射主动段的正弦振动响应、随机振动响应、冲击响应及在轨微振动的环境数据。将测量数据与星箭载荷耦合分析结果、地面力学试验结果进行了详细对比,结果表明:星箭载荷耦合分析的结果在星箭界面处横向相对准确,而纵向在有限频段准确,其他频段及星上分析结果均大于测量结果,即存在极大裕度;地面试验结果大于测量结果,意味着有较大的裁剪设计空间。测量数据对后续卫星模型修正、试验条件设计、相似平台卫星抗力学环境优化、部组件设计等均具有重要的参考价值。 相似文献
19.
Dr. Wei Sun Frank Ellmers Andreas Winkler Herbert Schuff Manuel Julián Sansegundo Chamarro 《Acta Astronautica》2011,68(7-8):802-810
Hispasat Advanced Generation 1 (HAG1) is the first satellite using the SGEO platform, which is under the development in the ESA Artes-11 program. Since the last presentation in the IAC 2007, a European industrial consortium led by OHB has completed the mission and spacecraft design. The platform Preliminary Design Review has been carried out in May 2008. The customer for the first mission is a commercial operator—Hispasat. The contract was signed in December 2008 and the satellite will be launched in 2012. To give confidence to the customer, SGEO platform will use up to date flight proven technologies. HAG1 carries 20/24 Ku-band and 3/5 Ka-band transponders to provide commercial services. Some innovative payload technologies will also be flown on board of HAG1 to gain in-orbit heritage. SGEO has also been selected as the baseline platform for the ESA Data Relay Satellite (EDRS). Phase-A study has just kicked off in January 2009. The targeted launch date is 2013. Heinrich Hertz will also use the SGEO platform. Heinrich Hertz is funded by the German Space Agency (DLR) and provides flight opportunities for technologies and components developed by the German Space Industry. With the HAG1 contract in hand, and EDRS and Heinrich Hertz in the line, OHB with its partners has the confidence that it will be able to speed up the product development of the SGEO platform for potential customers in the commercial market. This paper will first present the updated platform design and the status of the product development will be followed with the introduction of innovative payload technologies on board the first mission—HAG1 and ended with the mission concepts of EDRS and Heinrich Hertz missions. 相似文献
20.
对于大型高轨通信卫星等的高价值卫星,为增强卫星的抗风险能力,对极端温度环境条件和相较一般发射工作程序有所偏离的情况下,进行了卫星平台的热分布情况分析。采用了能够较全面深入反映平台结构热变形的3D舱板模型的有限元分析方法。表明最高温度50.8 ℃,最低温度-11.89 ℃,未超出卫星的极限温度要求,卫星平台的热性能有一定保持能力。舱板厚度方向温差2.5 ℃。对分析的热分布结果与一般条件下的热平衡试验结果进行了分析比较,分析结果较一般条件下的热平衡试验结果温度高出约25 ℃。在热分析结果基础上所做的卫星平台热变形分析,表明舱板的最大变形在抛罩时刻为0.185
mm,在星箭分离时刻为0.506 mm,已经接近结构局部精度的要求量级。在抛罩和星箭分离时的服务舱仪器板的热变形方向相反,预示着这里是热振动的潜在振源。 相似文献