On the effects of each term of the geopotential perturbation along the time I: Quasi-circular orbits

This paper provides a useful new method to determine minimum and maximum range of values for the degree and order of the geopotential coefficients required for simulations of orbits of satellites around the Earth. The method consists in a time integration of the perturbing acceleration coming from each harmonic of the geopotential during a time interval T. More precisely, this integral represents the total velocity contribution of a specific harmonic during the period T  . Therefore, for a pre-fixed minimum contribution, for instance 1×10^-8$1\times {10}^{-8}$ m/s during the period of time T, any harmonic whose contribution is below this value can, safely, be neglected. This fact includes some constraints in the degree and order of the terms which are present in the geopotential formula, saving computational efforts compared to the integration of the full model. The advantage of this method is the consideration of other perturbations in the dynamics (we consider the perturbations of the Sun, the Moon, and the direct solar radiation pressure with eclipses), since these forces affect the value of the perturbation of the geopotential, because these perturbations depend on the trajectory of the spacecraft, that is dependent on the dynamical model used. In this paper, we work with quasi-circular orbits and we present several simulations showing the bounds for the maximum degree and order (M) that should be used in the geopotential for different situations, e. g., for a satellite near 500 km of altitude (like the GRACE satellites at the beginning of their mission) we found 35?M?198$35?M?198$ for T=1$T=1$ day. We analyzed the individual contribution of the second order harmonic (_J2$J_2$) and we use its behavior as a parameter to determine the lower limit of the number of terms of the geopotential model. In order to test the accuracy of our truncated model, we calculate the mean squared error between this truncated model and the “full” model, using the CBERS (China-Brazil Earth Resources Satellite) satellite in this test.     

Constant thrust collision avoidance maneuver under thruster failure

In this paper, the collision avoidance maneuver under the chaser’s thruster failure in radial direction is investigated. First, based on the vision measurement, the relative position parameters of the target spacecraft are obtained and the target maneuvre positions are calculated through the isochronous interpolation method. Then, by using coupling effects, the thrusters working time intervals can be computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the thrusters working time intervals. Next, the switching control law under constant thrust is designed for active collision avoidance maneuvres along a specified trajectory.     

On the selection of optimal global geopotential model for geoid modeling: A case study in Pakistan

A statistical comparison has been made between gravity field parameters derived from different global geopotential models (GGMs) and observed gravity anomalies, gravimetric geoid and GPS-Leveling data. The motivation behind this study is the selection of best possible global geopotential model that best matches statistically with the local observed data in Pakistan. This will facilitate in decreasing the load on observed data for the development of regional gravimetric geoid in remove-compute-restore technique when used in the Stokes’s integral for computation of the residual part. It is observed that combined geopotential models such as EGM96 and PGM200A, EIGEN-GL04C and EIGEN-CG03C reflect the better match in the total spectral range of gravity and GPS-Leveling data. Results of the precise local geoid model also indicate similar characteristics. A very-high-degree model “EGM2008” (degree/order 2160) exhibits relatively superior statistical fit with observed ground data in Pakistan region. For satellite-only models an increasing trend in the standard deviation can be seen with maximum of about ∼4 m in difference between GPS-Leveling and corresponding GGM’s geoid with increase in the order from 50 to 120 and then it decreases afterwards. However, for the EIGEN-CHAMP03SP, standard deviation saturates to a value of 3.4 m. This is an indication of contamination in the long to medium wavelength part, i.e. 50–100° for the satellite-only models. Moreover, the models DEOS-CHAMP-01C, GGM02C and then ITG-GRACE03 appear to have better fit for medium to long wavelength and can possibly be recommended for use as long wavelength part with the local observed data. While a hybrid geopotential model selection can be achieved through the selection from either of DEOS-CHAMP-01C, GGM02C, GGM02S, EIGEN-GRACE02S or ITG-GRACE03 in the long wavelength (to degree and order 40) and EGM96, PGM200A, EIGEN-GL04C, EIGEN-CG03C or even EGM2008 in medium to short wavelength, i.e. from degree 41 to maximum degree and order.     

Active collision avoidance maneuver under constant thrust

In this paper, the relative position parameters of the target spacecraft are obtained by using the vision measurement and the target maneuver positions are calculated through the isochronous interpolation method. Furthermore, new switch control laws under constant thrust are designed for active collision avoidance maneuver of the chaser along a specified trajectory. The switch control laws are obtained based on the acceleration sequences and the working times of thrusters in three axes which can be respectively computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the working times.     

Field-of-view constrained guidance algorithm for -V-bar constant thrust departure

In this paper, the relative position parameters of the chaser are obtained by using the vision measurement and the target departure manoeuvre positions are calculated through the isochronous interpolation method. A guidance algorithm for -V-bar constant thrust departure with consideration of the constraints of field of view and safety distance is investigated. New switching control laws under constant thrust are designed for departure manoeuvres of the chaser. The switching control laws are obtained based on the acceleration sequences and the on time of thrusters in three axes which can be respectively computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the on time of thrusters.     

Solar neutron events as a tool to study particle acceleration at the Sun

The Sun provides unique opportunities to study particle acceleration mechanisms using data from detectors placed on the Earth’s surface and on board spacecrafts. Particles may gain high energies by several physical mechanisms. Differentiating between these possibilities is a fundamental problem of cosmic ray physics. Energetic neutrons provide us with information that keeps the signatures of the acceleration site. A summary of some representative solar neutron events observed on the Earth’s surface, including associated X and γ-ray observations from spacecrafts is presented. We discuss evidence of acceleration of particles by the Sun to energies up to several tens of GeV. In addition, a recent solar neutron event that occurred on September 7th 2005 and detected by several observatories at Earth is analyzed in detail.     

Constant thrust fuel-optimal control for spacecraft rendezvous

In this paper, constant thrust rendezvous is studied and the optimal rendezvous time is calculated by using continuous genetic algorithm. Firstly, the relative position parameters of the target spacecraft are obtained by using the vision measurement and the target maneuver positions are calculated through the isochronous interpolation method. Then, the results of the calculation of constant thrust rendezvous is founded by processing with multivariate linear regression method. Next, a new switching control law is designed based on the thrust acceleration sequence and the on time of thrusters which can be computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the on time of thrusters.     

New evidence for strong non-thermal effects in Tycho’s supernova remnant

For the case of Tycho’s supernova remnant (SNR), we present the relation between the blast wave and contact discontinuity radii calculated within the nonlinear kinetic theory of cosmic ray (CR) acceleration in SNRs. It is demonstrated that these radii are confirmed by recently published Chandra measurements which show that the observed contact discontinuity radius is very close to the shock radius. Therefore a consistent explanation of these observations can be given in terms of efficient CR acceleration which makes the medium more compressible.     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

An adaptive threshold method for improving astrometry of space debris CCD images

Optical survey is a main technique for observing space debris, and precisely measuring the positions of space debris is of great importance. Due to several factors, e.g. the angle object normal to the observer, the shape as well as the attitude of the object, the variations of observed characteristics for low earth orbital space debris are distinct. When we look at optical CCD images of observed objects, the size and brightness are varying, hence it’s difficult to decide the threshold during centroid measurement and precise astrometry. Traditionally the threshold is given empirically and constantly in data reduction, and obviously it’s not suitable for data reduction of space debris. Here we offer a solution to provide the threshold. Our method assumes that the PSF (point spread function) is Gaussian and estimates the signal flux by a directly two-dimensional Gaussian fit, then a cubic spline interpolation is performed to divide each initial pixel into several sub-pixels, at last the threshold is determined by the estimation of signal flux and the sub-pixels above threshold are separated to estimate the centroid. A trail observation of the fast spinning satellite Ajisai is made and the CCD frames are obtained to test our algorithm. The calibration precision of various threshold is obtained through the comparison between the observed equatorial position and the reference one, the latter are obtained from the precise ephemeris of the satellite. The results indicate that our method reduces the total errors of measurements, it works effectively in improving the centering precision of space debris images.     

Forming and keeping fast fly-around under constant thrust

A new switching control algorithm under constant thrust is designed for the chaser fast flying around the target spacecraft along a specified fly-around trajectory. The switching control laws are obtained based on the acceleration sequences and the on time of thrusters which can be computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the on time of thrusters. Furthermore, the relative position parameters of the target spacecraft are obtained by using the vision measurement and the target fly-around positions are calculated through the isochronous interpolation method. The change of the relative position and the relative velocity of the chaser during the constant thrust fast fly-around are presented through simulation example. It is proved that, with the switching control laws, the chaser will fast fly around the target spacecraft along the specified fly-around trajectory.     

Particle acceleration by stochastic fluctuations and dawn-dusk electric field in the Earth’s magnetotail

This work is devoted to investigate the interaction between protons and stochastic time-dependent electromagnetic fields generated by oscillating clouds of finite size, randomly positioned in the x–y  -plane. The geometry of the system is two-dimensional and, beside the time-dependent electromagnetic fluctuations, a steady-state, dawn-dusk electric field, _Ey$E_y$, has been added along the y-direction. The simultaneous presence of the stochastic time-dependent fluctuations and of the constant electric field component in the same system gives rise to two types of acceleration mechanisms operating on test particles: a second order Fermi-like process and a direct acceleration. By performing a parametric study, we extensively study the contribution of the two processes to proton acceleration. The energy values reached by test particles in this simple model are in good agreement with those observed in the Earth’s magnetotail region. Possible applications to the problem of particle acceleration in the terrestrial magnetosphere are widely discussed, and guidelines for future works are drawn.     

Generation of vertical–horizontal and horizontal–horizontal gravity gradients using stochastically modified integral estimators

The Earth’s gravity field modelling is an ill-posed problem having a sensitive solution to the error of data. Satellite gravity gradiometry (SGG) is a space technique to measure the second-order derivatives of geopotential for modelling this field, but the measurements should be validated prior to use. The existing terrestrial gravity anomalies and Earth gravity models can be used for this purpose. In this paper, the second-order vertical–horizontal (VH) and horizontal–horizontal (HH) derivatives of the extended Stokes formula in the local north-oriented frame are modified using biased, unbiased and optimum types of least-squares modification. These modified integral estimators are used to generate the VH and HH gradients at 250 km level for validation purpose of the SGG data. It is shown that, unlike the integral estimator for generating the second-order radial derivative of geopotential, the system of equations from which the modification parameters are obtained is unstable for all types of modification, with large cap size and high degree, and regularization is strongly required for solving the system. Numerical studies in Fennoscandia show that the SGG data can be estimated with an accuracy of 1 mE using an integral estimator modified by a biased type least-squares modification. In this case an integration cap size of 2.5° and a degree of modification of 100 for integrating 30′ × 30′ gravity anomalies are required.     

GOCE orbit analysis: Long-wavelength gravity field determination using the acceleration approach

The restricted sensitivity of the Gravity field and steady-state Ocean Circulation Explorer (GOCE) gradiometer instrument requires satellite gravity gradiometry to be supplemented by orbit analysis in order to resolve long-wavelength features of the geopotential. For the hitherto published releases of the GOCE time-wise (TIM) and GOCE space-wise gravity field series—two of the official ESA products—the energy conservation method has been adopted to exploit GPS-based satellite-to-satellite tracking information. On the other hand, gravity field recovery from data collected by the CHAllenging Mini-satellite Payload (CHAMP) satellite showed the energy conservation principle to be a sub-optimal choice. For this reason, we propose to estimate the low-frequency part of the gravity field by the point-wise solution of Newton’s equation of motion, also known as the acceleration approach. This approach balances the gravitational vector with satellite accelerations, and hence is characterized by (second-order) numerical differentiation of the kinematic orbit. In order to apply the method to GOCE, we present tailored processing strategies with regard to low-pass filtering, variance–covariance information handling, and robust parameter estimation. By comparison of our GIWF solutions (initials GI for “Geodätisches Institut” and IWF for “Institut für WeltraumForschung”) and the GOCE-TIM estimates with a state-of-the-art gravity field solution derived from GRACE (Gravity Recovery And Climate Experiment), we conclude that the acceleration approach is better suited for GOCE-only gravity field determination as opposed to the energy conservation method.     

Influence of time variable geopotential models on precise orbits of altimetry satellites,global and regional mean sea level trends

During the last decade a significant progress has been reached in the investigation of the gravity field of the Earth. Besides static, also time variable geopotential models have been recently created. In this paper we investigate the impact of the recent time variable geopotential models on altimetry satellite orbits and such altimetry products based on these orbits, as global and regional mean sea level trends. We show that the modeling of time variable gravity improves the orbit solutions, at least for the GRACE period where time variable gravity is sufficiently accurately observed by this mission. Our analysis includes six geopotential models jointly developed by GFZ German Research Centre for Geosciences and Space Geodesy Research Group (CNES/GRGS) Toulouse: the stationary model EIGEN-GL04S, a stationary version of EIGEN-6S (EIGEN-6S_stat), a corrected version of EIGEN-6S and three enhanced versions of EIGEN-6S called EIGEN-6S2, EIGEN-6S2A and EIGEN-6S2B. By “stationary” we mean “containing periodic parameters such as annual and semi-annual variations, but no secular (drift) terms”. We computed precise orbits for the radar altimetry satellites ERS-1, ERS-2, TOPEX/Poseidon, and Envisat over 20 years between 1991 and 2011. The orbit, single-mission and multi-mission altimetry crossover analyses show that the time variable models EIGEN-6S_corrected, EIGEN-6S2 and its two precursors EIGEN-6S2A/B perform notably better than the stationary models for the GRACE period from 2003 onwards. Thus, using EIGEN-6S2 and EIGEN-6S2A/B we have got 3.6% smaller root mean square fits of satellite laser ranging observations for Envisat, as when using EIGEN-GL04S. However, for the pre-GRACE period 1991–2003, the stationary geopotential models EIGEN-GL04S and EIGEN-6S_stat as well as EIGEN-6S2 having no drift terms for degree 3–50 at this time interval perform superior compared to EIGEN-6S_correct and EIGEN-6S2A/B which contain drifts for this period. We found, that the time variable geopotential models have a low (0.1–0.2 mm/yr) impact on our results for the global mean sea level trend. However, we found strong East/West differences up to 3 mm/yr in the regional mean sea level trends when using orbits of all four satellites based on time variable and stationary geopotential models. We show that these differences are related to the relative drifts of the centers-of-origin between the orbit solutions based on the time variable and stationary geopotential models. From the results of our detailed study, we conclude that the final version of the time variable gravity field model EIGEN-6S2 performs best for the four satellites tested. This model provides the most reliable and mission-consistent sea level estimates for the whole time period from 1992 to 2010. This model is of maximum spherical harmonic degree and order 260 and contains time series for drifts as well as annual and semiannual variations of the spherical harmonic coefficients for degree 2–50.     

Night side lunar surface potential in the Earth’s magnetosphere

In the Earth’s magnetotail, Japanese Moon orbiter Kaguya repeatedly encountered the plasmoid or plasma sheet. The encounters were characterized by the low energy ion signatures including lobe cold ions, cold ion acceleration in the plasma sheet-lobe boundaries, and hot plasma sheet ions or fast flowing ions associated with plasmoids. Different from the previous observations made in the magnetotail by the GEOTAIL spacecraft, the ions were affected by the existence of the Moon. On the dayside of the Moon, tailward flowing cold ions and their acceleration were observed. However, on the night side, tailward flowing cold ions could not be observed since the Moon blocked them. In stead, ion acceleration by the spacecraft potential and the electron beam accelerated by the potential difference between lunar surface and spacecraft were simultaneously observed. These electron and ion data enabled us to determine the night side lunar surface potential and spacecraft potential only from the observed data for the first time.     

Thermal neutrons’ response to the GLEs

Thermal neutrons’ flux near the Earth’s crust is very sensitive regarding different processes and phenomena both in the near-Earth space and in the Earth’s crust by reason of the dual nature of the thermal neutron flux. Its first source is associated with high-energy particles of cosmic rays penetrating into the Earth’s atmosphere and interacting with its elements. The second source originates from the radioactive gases contained in the Earth’s crust. So the contributions of these two sources are specified by the Earth’s crust conditions and its movements, on one hand and variations of high-energy particles flux near the Earth.     

A lunar cargo mission design strategy using variable low thrust

A design technique for a near optimal, Earth–Moon transfer trajectory using continuous variable low thrust is proposed. For the Earth–Moon transfer trajectory, analytical and numerical methods are combined to formulate the trajectory optimization problem. The basic concept of the proposed technique is to utilize analytically optimized solutions when the spacecraft is flying near a central body where the transfer trajectories are nearly circular shaped, and to use a numerical optimization method to match the spacecraft’s states to establish a final near optimal trajectory. The plasma thruster is considered as the main propulsion system which is currently being developed for crewed/cargo missions for interplanetary flight. The gravitational effects of the 3rd body and geopotential effects are included during the trajectory optimization process. With the proposed design technique, Earth–Moon transfer trajectory is successfully designed with the plasma thruster having a thrust direction sequence of “fixed-varied-fixed” and a thrust acceleration sequence of “constant-variable-constant”. As this strategy has the characteristics of a lesser computational load, little sensitivity to initial conditions, and obtaining solutions quickly, this method can be utilized in the initial scoping studies for mission design and analysis. Additionally, derived near optimal trajectory solution can be used as for initial trajectory solution for further detailed optimization problem. The demonstrated results will give various insights into future lunar cargo trajectories using plasma thrusters with continuous variable low thrust, establishing approximate costs as well as trajectory characteristics.     

Impact of covariance information of kinematic positions on orbit reconstruction and gravity field recovery

Gravity missions are equipped with onboard Global Positioning System (GPS) receivers for precise orbit determination (POD) and for the extraction of the long wavelength part of the Earth’s gravity field. As positions of low Earth orbiters (LEOs) may be determined from GPS measurements at each observation epoch by geometric means only, it is attractive to derive such kinematic positions in a first step and to use them in a second step as pseudo-observations for gravity field determination. The drawback of not directly using the original GPS measurements is, however, that kinematic positions are correlated due to the ambiguities in the GPS carrier phase observations, which in principle requires covariance information be taken into account. We use GRACE data to show that dynamic or reduced-dynamic orbit parameters are not optimally reconstructed from kinematic positions when only taking epoch-wise covariance information into account, but that essentially the same orbit quality can be achieved as when directly using the GPS measurements, if correlations in time are taken into account over sufficiently long intervals. For orbit reconstruction covariances have to be considered up to one revolution period to avoid ambiguity-induced variations of kinematic positions being erroneously interpreted as orbital variations. For gravity field recovery the advantage is, however, not very pronounced.