Mm wavelengths complex Doppler analysis using dark field illumination

Experimental results that indicate that at least two fundamental modes of Doppler generation are present when a rotating steel cylinder is broadside illuminated by radar. Improvised bistatic measurements at 77GHz are discussed and second order Doppler effects studied. Complex Doppler returns, consisting of two or more Doppler contributions, are decomposed and studied using empirical methods. In particular, ground illumination techniques are used to study Doppler in the shadow region of a cylinder of circumference 81 wavelengths. It is concluded that the complex Doppler response from the spinning cylinder consists of both direct (first order) and delayed (second order) Doppler components. Further measurements are proposed to study the delayed Doppler effect further.     

The Lunar Reconnaissance Orbiter Laser Ranging Investigation

The objective of the Lunar Reconnaissance Orbiter (LRO) Laser Ranging (LR) system is to collect precise measurements of range that allow the spacecraft to achieve its requirement for precision orbit determination. The LR will make one-way range measurements via laser pulse time-of-flight from Earth to LRO, and will determine the position of the spacecraft at a sub-meter level with respect to ground stations on Earth and the center of mass of the Moon. Ranging will occur whenever LRO is visible in the line of sight from participating Earth ground tracking stations. The LR consists of two primary components, a flight system and ground system. The flight system consists of a small receiver telescope mounted on the LRO high-gain antenna that captures the uplinked laser signal, and a fiber optic cable that routes the signal to the Lunar Orbiter Laser Altimeter (LOLA) instrument on LRO. The LOLA instrument receiver records the time of the laser signal based on an ultrastable crystal oscillator, and provides the information to the onboard LRO data system for storage and/or transmittal to the ground through the spacecraft radio frequency link. The LR ground system consists of a network of satellite laser ranging stations, a data reception and distribution facility, and the LOLA Science Operations Center. LR measurements will enable the determination of a three-dimensional geodetic grid for the Moon based on the precise seleno-location of ground spots from LOLA.     

Ground Compatibility Tests for Gravity Measurement of SELENE: Accuracies of Two- and Four-Way Doppler and Range Measurements

The Japanese lunar mission Selenological and Engineering Explorer (SELENE) was launched in September 2007 and continued its mission until June 2009, when the main orbiter impacted with the surface of the Moon. SELENE consisted of three satellites: Main, Rstar, and Vstar. Rstar’s tasks were to forward up-link signals from the Usuada Deep Space Center (UDSC) to Main, and to down-link returning signals from Main to UDSC. We refer to this tracking sub-system as a four-way Doppler measurement. In contrast, conventional tracking systems between Rstar and UDSC as well as between Main and ground stations are referred to as two-way Doppler and range measurements. Using Main and Rstar, we successfully observed the gravity field over the farside of the Moon. Because four-way Doppler measurements via a relay sub-satellite were a fundamental experiment in space for Japanese space agencies, compatibility of radiometric instruments onboard Main and Rstar to UDSC were carefully examined at the UDSC using components manufactured for flight models. These tests not only proved the feasibility of the four-way Doppler measurements but also provided biases and variations of the four-way Doppler and two-way Doppler and range measurements that were later taken into account during the processing of tracking data and the analysis of the lunar global gravity field.     

Measurements of L-band inland-water surface-clutter Doppler spectra

Although radar surface-clutter reflectivities from terrain are generally much greater than those from water, strong Bragg resonances at low but non-zero Doppler frequencies in backscatter from small inland bodies of water might potentially cause false alarms for moving target indicator (MTI) or other Doppler signal-processing techniques designed for target detection in ground clutter. To provide data for investigating this concern, measurements of L-band radar backscatter were recorded from the surface of a small inland freshwater reservoir in central Massachusetts. These measurements were of unusually high system stability and spectral purity so as to provide up to 80 dB of available spectral dynamic range. Strong Bragg spikes occurred in the clutter Doppler spectra from the reservoir at low (3 to 4 Hz) but non-zero Doppler frequencies. This strong Bragg resonance was persistent in time and space throughout the measurements. Spectral results are presented for all four combinations of linear polarization. Comparison with tree clutter spectral results indicates that, when an occasional water body comes under surveillance at vertical polarization in otherwise generally forested terrain, water clutter spectral density is expected to exceed surrounding-terrain tree clutter spectral densities in the Bragg-offset Doppler vicinity by large amounts     

Phase Compensation for Widely-Spaced Antenna Systems Employing Coherent Signal Combinations

This paper describes a technique for providing phase compensation to signals received at widely-spaced antennas and processed at a central location. Self-compensation is provided for pathlength variations in reference-signal distribution systems. The technique may be adapted to include the measurement and compensation of signal-channel phase variations. Practical systems which require this type of compensation include interferometric systems used for position and position-rate measurements of missiles and spacecraft, interferometers and arrays of antennas used for radio and radar astronomy, and arrays of large-aperture antennas used for deep-space communications.     

Adaptive SNR-based carrier phase multipath mitigation technique

An improved technique that mitigates specular multipath in Global Positioning System (GPS) differential carrier phase measurements is described. It adaptively estimates the spectral parameters (frequency, amplitude, phase offset) of multipath in the associated signal-to-noise ratio (SNR), and then constructs a profile of the multipath error in the carrier phase. A multipath correction is subsequently made by subtracting the profile from the actual phase measurement data. The technique is demonstrated on ground based experimental data, as well as flight data from the atmospheric research satellite CRISTA-SPAS. Ground experiments were conducted on static platforms in severe multipath environments. Multipath was deliberately introduced by either strategic placement of reflectors or electronic injection. This allowed for some control over the strength and frequency of the multipath. Averaging the results from 43 ground and 18 flight data sets, the differential carrier phase multipath was reduced by 47%. The complete results for both ground and flight tests are presented and are accompanied by discussions of individual cases     

Theory of LDV Tracking Systems

The application of frequency-tracking systems to the analysis of laser doppler velocimeter (LDV) signals degraded by background noise has been studied both theoretically and experimentally. Expressions are derived for both the correlation function and the expected value of the phase derivative in the general case of noise off center from the Doppler frequency, and these results are specialized to specific cases of practical interest. Laboratory measurements of output signal-to-noise ratio (SNR) and dc error, for varying input SNR and noise center frequency offset, show good agreement with the theoretical predictions.     

二维激光多普勒测速系统用于测量湍流分离流动

 为解决具有回流区的高湍流度分离流动的二维测量问题,研制了一种偏振分离型二维激光测速系统;测量了非对称阶跃扩张管道中湍流分离区的平均速度向量分布;得到了回流中心位置和回流区长度等参数;部分实验结果同数值模拟结果作了比较。     

北斗/GPS双频载波相位单点定位模型及精度分析

针对海洋工程实时米级绝对定位需求,利用双频伪距、载波相位观测量和同时估计接收机位置、接收机钟差和载波相位模糊度,构建了一种双频载波相位实时单点定位方法.亚太区域14个测站试验结果显示:北斗水平和高程定位RMS分别为1.33m和1.81m,GPS为0.60m和0.85m,北斗/GPS组合为0.56m和0.72m;船载动态试验结果显示:北斗水平和高程定位RMS分别为1.40m 和2.46m,GPS为0.69m 和0.90m,北斗/GPS组合为0.65m和0.83m.     

Random Error in ARGOS and SARSAT Satellite Positioning Systems

ARGOS and SARSAT are two satellite Doppler navigation systems in which low cost ground beacons transmit bursts of stable frequency signals. The Doppler shifted signals received by the satellite provide the positions of the beacons. The positioning error is dominated by a random component, due mainly to the short-term frequency stability of the beacon oscillator. Theoretical analysis and explicit expressions of the random errors are given.     

Angular Glint and the Moving, Rotating, Complex Radar Target

Angular glint produces errors in radar-indicated target direction and in the Doppler frequency. Glint arises from phase perturbations of the radar signal echoed from a complex target, as compared to those from a point target. The phase gradient V? represents these glint effects very well. The direction of this vector is that of radar angle sensing. The Doppler shift is obtined from the dot product of the gradient and the target velocity. A procedure that isolates and measures glint phase variations alone, for the inaccessible target, is described.     

DF Vectoring: Application to Stationary Synchronous Satellites

Several methods of using an earth-based radio reference signal to determine the three-axis attitude of a synchronous satellite, and two types of spacecraft electronic systems (amplitude measurement and phase measurement), which obtain attitude and pointing information from the radio reference signal for orientating the spacecraft and for directing large-aperture antennas aboard the spacecraft are described. The earth-based radio reference signal also enables the electronic systems to determine angles to other ground stations with respect to fixed (reference) stations on the earth. These attitude- and angle-determining techniques are applicable to communications satellites, navigational satellites, and intersatellite data relay systems.     

Rotating Blades Radio Interference in a Helicopter-Borne CW Doppler Radar

Radio interference generated in a helicopter-borne continuous wave (CW) Doppler radar system due to the rotating blades is analyzed. This problem has been previously treated for the case of pulse Doppler radar systems with very narrow (near zero) beamwidth. In this case the strong interference component returning directly from the blades (with no ground reflection) need not be considered as it reaches the receiver when it is still blinded. In the case of a CW Doppler radar, however, this interference component must be included. Numerical calculations show that the total blade interference power level, dominated by the direct component, is higher than that of the direct ground clutter in the radar clutter region. It decreases approximately as (f - fo)-4 in the radar clear region. It stays, however, well above the thermal noise level which might cause false alarm and degrade the radar performance.     

Omega Lane Ambiguity Resolution Using Methods of Statistical Decision Theory

Lane ambiguity is an inherent problem of navigation systems using phase measurements. A lane ambiguity resolution technique combining methods of hyperbolic and range-range modes of navigation has been developed. The basis of this approach is that the ensemble of received phases at any location forms a unique set and therefore the lane resolution problem reduces to finding a position such that the expected set of phases (or the phase predicted for the position of the navigator) matches the received set. This method of lane resolution is not constrained by lane widths and using the phase data of 10.2, 13.6, and 11? kHz; lane resolution has been accomplished for distances of up to 120 nmi. This method of lane resolution requires phase data from at least four stations at any frequency and is very sensitive to uncompensated propagation phase shifts.     

A Numerical Model of the SEIS Leveling System Transfer Matrix and Resonances: Application to SEIS Rotational Seismology and Dynamic Ground Interaction

Both sensors of the SEIS instrument (VBBs and SPs) are mounted on the mechanical leveling system (LVL), which has to ensure a level placement on the Martian ground under currently unknown local conditions, and provide the mechanical coupling of the seismometers to the ground. We developed a simplified analytical model of the LVL structure in order to reproduce its mechanical behavior by predicting its resonances and transfer function. This model is implemented numerically and allows to estimate the effects of the LVL on the data recorded by the VBBs and SPs on Mars. The model is validated through comparison with the horizontal resonances (between 35 and 50 Hz) observed in laboratory measurements. These modes prove to be highly dependent of the ground horizontal stiffness and torque. For this reason, an inversion study is performed and the results are compared with some experimental measurements of the LVL feet’s penetration in a martian regolith analog. This comparison shows that the analytical model can be used to estimate the elastic ground properties of the InSight landing site. Another application consists in modeling the 6 sensors on the LVL at their real positions, also considering their sensitivity axes, to study the performances of the global SEIS instrument in translation and rotation. It is found that the high frequency ground rotation can be measured by SEIS and, when compared to the ground acceleration, can provide ways to estimate the phase velocity of the seismic surface waves at shallow depths. Finally, synthetic data from the active seismic experiment made during the HP³ penetration and SEIS rotation noise are compared and used for an inversion of the Rayleigh phase velocity. This confirms the perspectives for rotational seismology with SEIS which will be developed with the SEIS data acquired during the commissioning phase after landing.     

Orbit Determination from Passive Range Observations

An experiment is described by which the ephemeris of a near-synchronous satellite was determined from passive range observations. The data consist of the measured times of reception at ground tracking stations of electromagnetic signals which are radiated from the satellite at regular intervals. A comparison of the ephemeris to one obtained from Doppler tracking indicates an accuracy of better than 4.9 mrad rms.     

Instantaneous GPS attitude determination

A procedure for instantaneous GPS (Global Positioning Satellite) attitude determination, i.e., a solution for the GPS integrated carrier Doppler wavelength ambiguities using only measurements at a single epoch, is described. Most previous techniques to solve the phase ambiguity problem have required some form of time history processing relying on GPS satellite and/or user motion to provide enough geometry change to eliminate false solutions. The algorithm described assumes three noncollinear antennas and integrated carrier Doppler measurements from four or more satellites. Double-difference processing provides at least three independent observables for the two antenna separation vectors to compute the three attitude Euler angles     

Power line transmission and radiation

A power line system consisting of multi-conductors above the ground is decomposed into a metal return (or balanced) and a ground return (unbalanced) circuit in terms of propagation modes. Power line radiation above the ground is sorted into two classes, transition radiation from discontinuities which takes place from a line of finite length and ?erenkov-like radiation from a ground return or unbalanced circuit due to the Earth's finite conductivity and dielectric properties. ?erenkov-like radiation is thought to be predominant and to be a main source origin of power line radiation and, therefore, is specifically discussed in this paper. The problem is reduced simply to wave propagation along an infinite wire above the ground, without taking into account line discontinuities and ionospheric effects. It is shown that a TEM-type wave of a ground return circuit at low frequencies virtually transfers to the principal TM wave of a surface waveguide at high frequencies, via a hybrid EH-type wave in an intermediate range of frequencies, i.e., ‘transition region’ with increasing frequency. Consequently, the attenuation characteristics of wave propagation, which should include radiation losses as well as ohmic losses in the wire and in the ground, possess a maximum and minimum at certain frequencies in the transition region. This is due to two reasons: one is that the Earth transfers to a dielectric from a conductor and the other is that the field concentrates more densely around the wire with increasing frequency. Experimental evidence of this phenomenon is also given.     

Statistical Analysis of Velocity Measuring Systems Employing the Photon Correlation Technique

Velocities of fluid flows and solid objects can be measured by performing photon count correlations on laser light scattered from the measuring region, the most common optical configuration being the laser Doppler system. A statistical analysis for the counting process is presented for both the constant velocity case and for turbulent fluid flows with formulations for specific laser Doppler configurations. For turbulent flow, relationships are derived for the shape of the count correlation in terms of the mean velocity and rms turbulent intensity, taking into account the shape of the turbulence correlation curve. Experimental results recorded for both a constant velocity solid object and for an unseeded turbulent air flow in a wind tunnel are presented, and, in the latter case, comparisons are made with hot-wire measurements.