Control of the deployment of an orbital tether system that consists of two small spacecraft

Control of an orbital tether system that consists of two small spacecraft has been considered. The proposed control laws are based on the modification of well-known programs for the deployment of tether system systems under the assumption that the masses of spacecraft and the tether are comparable in magnitude. To construct nominal deployment programs, we have developed a mathematical model of the motion of the given system in an orbital moving coordinate system taking into account the specific features of this problem. The performance of the proposed deployment programs is assessed by a mathematical model of the orbital tether system with distributed parameters written in the geocentric coordinate system. The test calculations involve a linear regulator that implements feedback on the tether length and velocity.     

Chaotic oscillations of spacecraft with an elastic radially oriented tether

A mechanical system consisting of a spacecraft with weightless elastic tether and load is considered in the paper. The spacecraft motion under the action of tensile force of a radially oriented tether is investigated. It is shown that elastic tether oscillations can result in appearance of chaotic modes of spacecraft motion. By means of the Melnikov method a condition is obtained, allowing one to determine the measure of damping sufficient for prevention of these chaotic modes. The influence of system’s mass-geometric and elastic characteristics on the form of phase portrait and on the value of periodic disturbance, caused by oscillations of the elastic vertical tether, is studied.     

The Dynamics of Arranging a Spacecraft Tether Group as a Triangular Constellation

Cosmic Research - The method of arranging a tether group of four spacecraft as triangular beam constellation is considered in this paper. The group consists of a central spacecraft, from which the...     

Motion of a descent capsule relative to its center of mass when deploying the orbital tether system

The spatial motion relative to the center of mass is considered for a capsule on an elastic tether, when it is unrolled from a spacecraft by a special program. The spacecraft is in a circular orbit and oriented relative to the local vertical, which is guaranteed by operation of its own stabilization system. Angular motion of the capsule relative to the tether direction is studied, and the main factors influencing the stability of this motion are analyzed. An approximate quasi-linear mathematical model of the capsule attitude motion is obtained, which allows one to estimate the influence of major disturbances of its motion. The results of numerical simulations are presented for characteristic cases of the capsule motion.     

Magnetobraking for Mars return vehicles

It is proposed that magnetobraking may be used to dissipate hyperbolic excess velocity from a spacecraft returning from Mars to Earth orbit. In magnetobraking, an electrodynamic tether is deployed from the spacecraft. The Earth's magnetic field produces a force on electrical current in the tether, which can be used to either brake or accelerate the spacecraft without expenditure of reaction mass. The peak acceleration on the Mars return is 0.007 m/s², and the amount of braking possible is dependent on the density and current-carrying capacity of the tether, but is independent of length. Since energy is produced as the spacecraft velocity decreases, no on-board power source is required. As the spacecraft approaches the Earth, the magnetic field increases and the power produced by the tether increases, reaching a maximum of about 800 W per kg of spacecraft mass at closest approach.     

空间绳系机器人抓捕非合作目标的质量特性参数辨识

针对空间绳系机器人抓捕非合作目标/空间垃圾后需要对其进行回收/拖曳的精确控制问题,提出了一种利用抓捕后保持阶段的振动特性辨识目标参数的方法。首先,根据质量特性参数辨识的需要,推导了系统的动力学模型。不同于以往将本体卫星和被抓捕目标简化为质点的动力学模型,本文针对任意的目标抓捕位置,在考虑重力梯度影响的基础上,利用拉格朗日法获得系统各广义坐标的动力学公式。然后,分析非合作目标和系绳在后抓捕保持阶段的姿态运动。最后,在非合作目标与本体卫星没有任何信息交互的情况下,利用后抓捕阶段目标卫星和系绳特有的振动,并使用具有鲁棒性可遗忘因子的递推最小二乘法,提出了包括转动惯量和质心到任意抓捕点距离在内的质量特性参数辨识算法。     

Two-craft tether formation relative equilibria about circular orbits and libration points

The relative equilibria of a two spacecraft tether formation connected by line-of-sight elastic forces moving in the context of a restricted two-body system and a circularly restricted three-body system are investigated. For a two spacecraft formation moving in a central gravitational field, a common assumption is that the center of the circular orbit is located at the primary mass and the center of mass of the formation orbits around the primary in a great-circle orbit. The relative equilibrium is called great-circle if the center of mass of the formation moves on the plane with the center of the gravitational field residing on it; otherwise, it is called a nongreat-circle orbit. Previous research shows that nongreat-circle equilibria in low Earth orbits exhibit a deflection of about a degree from the great-circle equilibria when spacecraft with unequal masses are separated by 350 km. This paper studies these equilibria (radial, along-track and orbit-normal in circular Earth orbit and Earth–Moon Libration points) for a range of inter-craft distances and semi-major axes of the formation center of mass. In the context of a two-spacecraft Coulomb formation with separation distances on the order of dozens of meters, this paper shows that the equilibria deflections are negligible (less than 10^?6°) even for very heterogeneous mass distributions. Furthermore, the nongreat-circle equilibria conditions for a two spacecraft tether structure at the Lagrangian libration points are developed.     

电动系绳离轨装置的设计与分析

电动系绳离轨效果显著,无需消耗推进剂,是处理LEO(低地球轨道)废弃航天器的有效手段。文章介绍了利用电动系绳进行离轨的原理,提出了电动系绳离轨装置所需的硬件及其设计要求;给出了电动系绳离轨装置的控制策略和工作过程,并利用系绳运动方程对电动系绳离轨的效能进行了分析。结果显示,利用电动系绳可以大大减小离轨的面积时间积。     

绳系卫星系统交会对接的应用与设计

文章介绍了绳系系统交会对接这项新技术在空间中的应用。主要包括:空间站利用系绳与航天器交会对接,实现为空间站提供各种供给;利用绳系系统与空间碎片对接,可回收或转移空间碎片,保护空间环境;利用一级或多级的绳系系统组成轨道转移系统,实现向地球同步轨道或火星轨道上转移和运送有效载荷。文章还介绍了绳系交会对接系统的设计,包括系统的一般控制方法和算法以及系统的结构设计。随着各项相关技术的发展,绳系卫星系统交会对接将发挥更大作用。     

Benefits and risks of using electrodynamic tethers to de-orbit spacecraft

By using electrodynamic drag to greatly increase the orbital decay rate, an electrodynamic space tether can remove spent or dysfunctional spacecraft from low Earth orbit (LEO) rapidly and safely. Moreover, the low mass requirements of such tether devices make them highly advantageous compared to conventional rocket-based de-orbit systems. However, a tether system is much more vulnerable to space debris impacts than a typical spacecraft and its design must be proved to be safe up to a certain confidence level before being adopted for potential applications. To assess space debris related concerns, in March 2001 a new task (Action Item 19.1) on the “Potential Benefits and Risks of Using Electrodynamic Tethers for End-of-life De-orbit of LEO Spacecraft” was defined by the Inter-Agency Space Debris Coordination Committee (IADC). Two tests were proposed to compute the fatal impact rate of meteoroids and orbital debris on space tethers in circular orbits, at different altitudes and inclinations, as a function of the tether diameter to assess the survival probability of an electrodynamic tether system during typical de-orbiting missions. IADC members from three agencies, the Italian Space Agency (ASI), the Japan Aerospace Exploration Agency (JAXA) and the US National Aeronautics and Space Administration (NASA), participated in the study and different computational approaches were specifically developed within the framework of the IADC task. This paper summarizes the content of the IADC AI 19.1 Final Report. In particular, it introduces the potential benefits and risks of using tethers in space, it describes the assumptions made in the study plan, it compares and discusses the results obtained by ASI, JAXA and NASA for the two tests proposed. Some general conclusions and recommendations are finally extrapolated from this massive and intensive piece of research.     

考虑太阳帆板振动的空间绳系拖曳动力学与控制

针对使用空间绳网捕获带有太阳帆板等柔性附件的大型失效航天器的碎片清除任务,充分考虑了拖曳过程中柔性附件产生的振动对系统的稳定造成的影响.首先采用凯恩方法建立了失效航天器绳系拖曳系统动力学模型,在建模过程中充分考虑系绳的质量和振动、帆板的振动、系统的轨道运动对姿态的影响等,使动力学模型更加详细和完整,且该动力学模型不受失...     

Characterization of the optimal mass problem for aerobraking tethers

In the aerobraking tether concept, a probe, connected to an orbiter by a long, thin tether, passes through the atmosphere of a target planet to provide a desired velocity change, while keeping the orbiter above the sensible atmosphere. In earlier work, simple analytic models have been developed which accurately describe the characteristics of the mass-optimal tether. In this paper these models are generalized so that design of the spacecraft and the aerobraking maneuver can be completely characterized by four independent parameters. By comparing the tether mass (e.g. for aerocapture) with the propellant mass required to capture the orbiter, we show that aerobraking tethers have a clear advantage for a wide range of maneuvers.     

Qualification and in-flight demonstration of a European tether deployment system on YES2

This paper highlights the design, qualification and mission performance of the tether deployer system on the second Young Engineers’ Satellite (YES2), that featured a tethered momentum transfer. The deployer is designed with a broad range of near-term tether applications in mind. The system contains the tether, including features to enhance safety and wound up in controlled manner onto a spool core, optical deployment sensors, a “barberpole” friction brake controlled by a stepper motor and a triple tether cutter system. To initiate the deployment a spring-based ejection system was developed, and to apply accurate momentum transfer a timer and release system is present on the subsatellite side. A small, 6 kg re-entry capsule was developed as subsatellite. On September 25th, 2007, YES2 deployed a 32 km tether in orbit and gathered a wealth of data. Confidence is gained from the mission results for use of the deployer in future missions.     

Orbital and relative motion of a tethered satellite system

A simplified model for the orbital and relative motion of a tethered satellite system is presented. The tether acts as a light elastic string with small structural damping but without bending stiffness. Its mass is taken into account in the calculation of the total kinetic and potential energies of the tethered system. This formulation allows the inclusion of the complete gravity gradient influence on the dynamics of the system. The resulting three-dimensional motion is separated in the centre of mass orbital motion on the one hand and the relative motion of the end-bodies on the other. No restrictions on length of the tether or on mass ratio of the end-masses are imposed. It is found that the frequencies and amplitudes of the longitudinal tether oscillations are realistic as long as the tether mass is less than that of the subsatellite.     

Behavior of tethered debris with flexible appendages

Active exploration of the space leads to growth of a near-Earth space pollution. The frequency of the registered collisions of space debris with functional satellites highly increased during last 10 years. As a rule a large space debris can be observed from the Earth and catalogued, then it is possible to avoid collision with the active spacecraft. However every large debris is a potential source of a numerous small debris particles. To reduce debris population in the near Earth space the large debris should be removed from working orbits. The active debris removal technique is considered that intend to use a tethered orbital transfer vehicle, or a space tug attached by a tether to the space debris. This paper focuses on the dynamics of the space debris with flexible appendages. Mathematical model of the system is derived using the Lagrange formalism. Several numerical examples are presented to illustrate the mutual influence of the oscillations of flexible appendages and the oscillations of a tether. It is shown that flexible appendages can have a significant influence on the attitude motion of the space debris and the safety of the transportation process.     

Experiments and numerical simulations of an electrodynamic tether deployment from a spool-type reel using thrusters

The amount of space debris is ever increasing, and pollution of the space environment has become a serious problem that can no longer be ignored. Consequently, the active removal of large space debris from crowded economically useful orbits should begin as soon as possible. The Japan Aerospace Exploration Agency has been investigating an active debris removal system that employs highly efficient electrodynamic tether (EDT) technology for orbital transfer. This study investigates the tether deployment from a spool-type reel using thrusters by means of numerical simulations of an EDT system. The thrusters are used in order to ensure the deployment of a tether with the length of several kilometers. In the simulations using a multiple mass tether model, the key parameters are estimated from various on-ground experiments. By means of the numerical simulations, the dynamics of tether deployment is studied and requirements of thruster needed for the deployment, such as the thrust forces and the periods of thruster activation, are clarified.     

空间碎片绳网捕获拖曳恒张力控制

针对空间绳网系统捕获空间碎片后,在轨道转移过程中的精确控制问题,提出一种使用常值拉力将空间碎片拖曳至坟墓轨道的方法。首先,采用牛顿欧拉法建立绳系组合体动力学模型;其次,通过李雅普诺夫方法证明仅使用恒张力即可实现拖曳过程的稳定控制;再次,提出采用常值拉力切换控制律抑制空间碎片的姿态章动,采用基于相平面控制原理的控制律抑制绳系组合体面内面外摆动,规避在轨道转移过程中系绳松弛造成缠绕、系绳张力过大造成断裂或两星接近发生碰撞等风险。最后,通过拖曳离轨全过程仿真分析,校验了所提出控制方法的有效性。     

Planar dynamics of variable length multi-tethered spacecraft near collinear Lagrangian points

This paper examines the planar dynamics of a wheel-and-spoke configured multi-spacecraft system, connected together by variable length tethers, near the second Sun–Earth Lagrangian point. The closed form solutions of the system under some simple tether length functions are determined and numerical results for the tether pitch librations under more complex tether length functions are obtained, along with the control effort required to maintain the desired tether librations.     

Design concepts for the first 40 km a key step for the space elevator

The Marine Node for the Space Elevator Infrastructure is the base for all activities to load and unload the cargo and climbers. As the basic design of the space elevator power system is solar power only, the first 40 km is hazardous to operations and demands enclosed packaging of fragile tether climbers. A significant question is: how do we place a full-up tether climber, driven by solar power, above the atmosphere? Two approaches, starting at the Marine Node, allow the tether climber to initiate the climb with solar energy above the atmosphere. The third viable approach is to provide a platform at altitude for initiation of tether climb. These approaches would enable solar power to be the source of energy for climbing. The three approaches are:     

Planar dynamics of variable length multi-tethered spacecraft near collinear Lagrangian points

This paper examines the planar dynamics of a wheel-and-spoke configured multi-spacecraft system, connected together by variable length tethers, near the second Sun–Earth Lagrangian point. The closed form solutions of the system under some simple tether length functions are determined and numerical results for the tether pitch librations under more complex tether length functions are obtained, along with the control effort required to maintain the desired tether librations.