A relative clutter metric

Clutter plays a very important role in the area of machine and human-in-the-loop target acquisition. A great deal of interest has recently been shown in assessing several different definitions of clutter. In spite of so many definitions available, no single clutter definition has been agreed on by the infrared community as being the best. We develop a new clutter metric, called relative clutter, which is based on factor analysis which is extensively used for statistical analysis. This relative clutter combines many definitions of clutter. Different methods for calculating the relative clutter based on the magnitude of the eigenvalues obtained from the correlation matrix are suggested. The relative clutter of many images is analyzed     

基于点集合并的修正Hough变换TBD算法

在低信噪比条件下,基于Hough变换的检测前跟踪算法是进行强杂波背景下目标航迹检测的一种手段。本文针对Hough变换后一个目标产生多条可能航迹以及航迹内可能存在杂波点的问题,提出了一种基于能量最大点和点集合并的修正Hough变换检测前跟踪算法。该算法利用量测点时序、能量信息及目标速度先验信息对Hough变换后点迹进行关联和剔除,能够有效的对目标原始航迹进行回溯。针对高斯噪声背景下的飞行目标,仿真结果表明该算法能够对微弱目标进行有效检测,在目标数目、杂波密度、信噪比发生变化的条件下仍能保持较高的检测概率。     

Detection Performance in Clutter with Variable Resolution

Experiments were conducted to determine the influence of background clutter on target detection criteria. The experiment consisted of placing observers in front of displayed images on a TV monitor. Observer ability to detect military targets embedded in simulated natural and manmade background clutter was measured when there was unlimited viewing time. Results were described in terms of detection probability versus target resolution for various signal to clutter ratios (SCR). The experiments were preceded by a search for a meaningful clutter definition. The selected definition was a statistical measure computed by averaging the standard deviation of contiguous scene cells over the whole scene. The cell size was comparable to the target size. Observer test results confirmed the expectation that the resolution required for a given detection probability was a continuum function of the clutter level. At the lower SCRs the resolution required for a high probability of detection was near 6 line pairs per target (LP/TGT), while at the higher SCRs it was found that a resolution of less than 0.25 LP/TGT would yield a high probability of detection. These results are expected to aid in target acquisition performance modeling and to lead to improved specifications for imaging automatic target screeners.     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

Adaptive Optical Target Detection Using Correlated Images

A method for target detection that achieves clutter rejection by the use of multiple observations of the same target scene is developed. Multiple scene observations can be obtained by processing separate frequency bands of the same target scene or by recursively processing sequential observations in time. Optimal detection algorithms are developed, based on the assumption that the image intensity can be modeled as a variable mean spatial Gaussian process. Several fast detection algorithms are derived which make use of the fact that the covariance matrices of many optical and infrared (IR) images can be accurately approximated by diagonal matrices. These algorithms provide efficient solutions to the problem of processing multiple correlated scenes or multiple sequential imaging. Computer simulations based on actual optical and IR image data were used for checking the theoretical results. The new detection algorithms achieved performance improvement in detection signal-to-noise ratio of up to 10 dB over conventional target correlation methods.     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

自适应强杂波抑制与点状动目标检测

研究了基于自适应图像杂波抑制的微弱点状动目标检测技术。首先利用四叉树算法,将原始的非平稳图像分割成多个准平稳的图像子块,然后对各子块进行LS自适应背景杂波估计与抑制,从而获得准高斯白噪声背景;再利用目标运动连续性假设,将目标在相邻多帧上的位置状态模型化为高阶马尔可夫数据链,建立轨迹状态空间;根据该模型采用多帧沿轨迹非线性集成算法进行检测。既克服了传统的三维匹配算法造成搜索次数巨大的弱点,同时也避免了二维投影检测带来的信噪比下降。理论分析和大量仿真实验证明了其有效性。     

Enhanced target detection using stereoscopic imaging radar

An earlier correspondence reported experiments which suggested that the visibility of a target in clutter could be improved through stereoscopic viewing of high resolution radar images. Here we provide a more thorough discussion on the application of stereo for improving radar detection and recognition. Experiments are reported which confirm and extend the earlier reported results. An example of the use of stereo in a practical system is provided which demonstrates the potential for acquisition of high quality radar stereograms     

基于约束序贯M估计的时空域融合红外杂波抑制

针对红外弱小目标检测中的强背景杂波干扰抑制问题进行研究,提出了一种基于参数约束序贯M估计的时空域融合自适应杂波抑制算法.该算法首先在分析序列图像帧间失配的基础上建立了一种改进的时空域融合背景预测模型,结合二维离散傅里叶快速变换图像配准和双线性插值方法进行灰度值估计;然后,基于约束序贯M估计方法进行模型参数的自适应估计,...     

Adaptive Rectification Filter for Detecting Small IR Targets

Clutter suppression is one of the most important subjects in the field of small target detection under infrared (IR) strong clutter background. While removing the clutter background, however, such methods may reverse the relative energy distribution of target and noise in the clutter suppressed image, and disturb the subsequent target segmentation and detection. This paper analyzes the causation of such problems, does research on the relationship between target energy characteristics and detection probability, and presents a novel filter of energy distribution adaptive rectification (EDARF). Based on the EDARF, an improved framework of dim small target detection is proposed to rectify the energy distribution in the clutter-suppressed images by conventional adaptive filters. The proposed EDARF's performance is estimated by experimental comparisons of three linear/nonlinear filters before and after using EDARF. Extensive experimental results show that the proposed EDARF improves efficiently the performance of detecting dim small targets against strong undulant cloud-cluttered backgrounds.     

A novel target detection approach based on adaptive radar waveform design

To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio (SCR) in application of target detection on sea for space-based radar (SBR), a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.     

Sum-difference Reduced-dimensional Processing in SAR Image Domain and Statistical Analysis for Ground Moving Target Indication

In this article, a new reduced-dimensional adaptive processing algorithm based on joint pixels sum-difference data for clutter rejection is proposed. The sum-difference data are obtained by orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multi-satellite radar system. In the sense of statistical expectation, the sum-differ- ence data contain the common and different information of the SAR images. Therefore, the objective of clutter cancellation can be achieved by adaptive processing. Moreover, based on the residual image after clutter rejection, statistical analysis of constant false-alarm rate (CFAR) detection of moving targets is also presented. Simulation results demonstrate the effectiveness and robustness of the proposed algorithm even with heterogeneous clutter and image co-registration error.     

基于SVM算法的虚假航迹识别

针对云雨杂波和主被动干扰导致多雷达传感器产生虚假目标航迹的问题,利用支持向量机(SVM)算法的自主学习能力,通过构建基于数据驱动的判别模型进行虚假航迹识别。针对航迹起始得到的目标潜在航迹,利用人工智能数据驱动、自学习的特点,设计了SVM算法。通过对已标记真假的目标航迹样本进行离线学习,形成虚假航迹识别的SVM分类器,实现了基于数据驱动的判别模型代替先验知识规则约束的固定模型,并在工程应用中,利用SVM分类器在线识别虚假航迹,完成实时剔除。通过实测雷达数据实验验证,该算法的目标虚假航迹准确率高达95%以上,完全满足实际的工程应用需求。相比基于阈值或规则进行硬性判断的传统虚假航迹识别方法,所提出的算法不仅提高了准确率,还具有较高的实时性,能够适应复杂多变的杂波环境,在实际应用中具有更强的适应性和实用性。因此,提出的基于SVM算法的虚假航迹识别方法对于密集杂波场景下的虚假航迹剔除问题具有显著的实际应用价值。     

Threshold Control for Automatic Detection in Radar Systems

In automatic detection in radar systems an estimate of background clutter power is used to set the detection threshold. Usually detection cells surrounding the cell under test for the presence of a target are used to estimate the clutter power. In the research reported herein, the target location is taken to be uncertain and thus returns from a target could corrupt this clutter power estimate. It is shown how the threshold should be varied to compensate for the resulting degradation in detection performance. The threshold control procedure is based on a priori information about target location that could be supplied by the radar's tracking system. In addition, a simple procedure for calculating detection and false alarm probabilities for Swerling II target models is presented.     

海杂波FRFT域分形特征在动目标检测中的应用

文中研究了海上动目标雷达回波与海杂波在分数阶Fourier域(FRFT域)的分形特性,利用两者幅值起伏程度的不同,提出了一种基于FRFT域分形维数差异的动目标检测方法。该方法以处处连续而不可导的非平稳不规则信号模型——分数布朗运动作为FRFT域分形模型,通过仿真分析实测海杂波数据的分形曲线,证明海杂波在FRFT域的无标度区间内具有分形特性。提取出FRFT域海杂波与动目标回波的分形维数,并利用其固有的差异进行目标检测。经不同极化方式下海杂波数据仿真,验证了算法的有效性。     

Radar/Sonar Signal Design for Bounded Doppler Shifts

In many detection and estimation problems, Doppler frequency shifts are bounded. For clutter or multipath that is uniformly distributed in range and symmetrically distributed in Doppler shift relative to the signal, detectability of a point target or a communication signal is improved by minimizing the weighted volume of the magnitude-squared autoambiguity function. When clutter Doppler shifts are bounded, this volume is in a strip containing the range axis on the range-Doppler plane. For scattering function estimation, e.g., for weather radar, Doppler flow meters, and distributed target classifiers, it is again relevant to minimize ambiguity volume in a strip. Strip volume is minimized by using a pulse train, but such a signal has unacceptably large range sidelobes for most applications. Other waveforms that have relatively small sidelobe level within a strip on the range-Doppler plane, as well as small ambiguity volume in the strip, are obtained. The waveforms are composed of pulse pairs that are phase modulated with Golay complementary codes.     

Improvement Factor of the Phase-Sensitive Noncoherent MTI

The phase-sensitive noncoherent MTI detects targets by relative motion between the target and an extended clutter background. In this type of MTI, the phase of the target is compared with the phase of the clutter in an adjacent range bin. Theoretical analysis of the system's performance is presented. The improvement factors for single- and double-delay periodic filters are derived and computational results are included.     

Adaptive imaging for forward-looking ground penetrating radar

Most of the current forward-looking ground-penetrating radar (FLGPR) systems use conventional delay-and-sum (DAS) based methods to form radar images for detection of the target (such as a landmine). However, DAS is a data-independent approach which is known to suffer from low resolution and poor interference and clutter rejection capability. We present a data-adaptive imaging approach for FLGPR image formation based on APES (amplitude and phase estimation) and rank-deficient RCB (robust Capon beamforming). Due to the data-adaptive nature of both APES and RCB, our approach has better resolution and much better interference and clutter rejection capability than the standard DAS-based imaging methods. The excellent performance of the proposed method is demonstrated using experimental data collected via two FLGPR systems recently developed by PSI (Planning Systems, Inc.) and SRI (Stanford Research Institute).     

Target detection trials with a millimeter wave radar system

Unobstructed, large RCS targets, similar radar targets surrounded by moving foliage, and small targets in severe clutter have been used as test cases for two pre-processing algorithms and several threshold levels in an experimental millimeter wave radar system. The rather conventional "six-out-of-eight" pulse radar selection method with binary output has been compared to an algorithm that accepts a target if the pre-defined trigger level is crossed by the average of the eight consecutive pulses. In this case, however, the output is an analog value corresponding to the relative average video amplitude. In terms of plotted video, this process seems to give a slightly better combination of false alarm rate and detection probability. Large targets are easier to detect from foliage clutter with the conventional method.     

防空导弹攻击目标的红外成像特性分析

通过结合对目标的红外成像特性研究,首先阐述了在复杂背景条件下防空导弹对目标的红外成像寻的制导的组成和原理。然后详细分析了地面杂散背景的辐射和散射特征,综合分析了军用飞机被防空导弹攻击目标的红外辐射特性。在对复杂背景辐射特征和目标红外特性分析的基础上,给出了一组典型地表光谱辐射亮度曲线和太阳对地表的全波段辐射能流(辐照度)随时间的变化曲线;绘制出了红外成像导引头在整个红外波段内的探测效能曲线。分析结果对研究防空导弹红外成像导引头如何从复杂背景中将目标的典型特征信息提取出来并进行有效识别和跟踪奠定了基础。