共查询到20条相似文献,搜索用时 531 毫秒
1.
介绍廊坊市某住宅小区S2号楼钢结构框架多层单体的结构体系、节点设计及其他技术指标,可供同类建筑结构设计时参考. 相似文献
2.
3.
热防护系统多层隔热结构传热分析及性能研究 总被引:11,自引:3,他引:11
由外部高温合金壳板及内部多层隔热结构组成的金属热防护系统被认为将在未来重复使用运载器上大面积采用。分析了多层隔热结构内导热与辐射的复合换热问题。采用二热流近似方法分析了纤维席内的辐射热流。分析了多孔介质纤维席内气体、固体有效导热系数。并应用有限差分法建立了多层隔热结构瞬态传热数值分析模型。反射屏层数、发射率及纤维席厚度、密度是多层隔热结构重要的设计参数。详细的分析了这些参数对多层隔热结构隔热性能的影响,总结了提高多层隔热结构隔热性能的方法。 相似文献
4.
5.
6.
以满足产品的性能与可靠性维修性保障性(RMS)综合设计需求为目标,对产 品设计过程中如何预防故障,定位故障及故障维修的相关概念进行分析、总结和归纳,提出 了以故障知识为核心,面向产品综合设计的知识本体框架,该框架将相关概念划分为四层进 行描述,即产品层、故障基本概念层、故障扩展层、故障应对层。利用本体论方法对相关的 核心概念进行了形式化的定义,并给出了基本的故障知识本体和设计应对本体结构。最后以 挑战者号航天飞机的失事为例,应用本文建立的故障本体较好地表达了航天飞机故障过程及 应对的改进措施,验证了该方法的可行性。
相似文献
相似文献
7.
采用铝硅共晶焊丝对铝合金/不锈钢异种金属管进行了TIG熔钎焊接实验,研究了镀Zn层的挥发对接头性能的影响,分析了接头微观组织,测试了接头力学性能。研究结果表明,不锈钢表面镀Zn层能够增强液态钎料在钢表面润湿铺展及防止金属间化合物生成的作用,在多道焊过程中镀Zn层过热挥发失去了对钢表面的保护,在界面生成脆性的金属间化合物,并且Zn的挥发在接头中形成气孔缺陷;不锈钢界面层上部镀Zn层熔化严重,液态钎料对不锈钢产生溶蚀作用,Fe元素通过镀Zn层向液态Al-Si熔池中扩散,形成了枝晶状的Al-Fe金属间化合物,在界面层也生成了金属间化合物层,不锈钢界面层下部镀Zn层完整,起到了良好的保护作用;拉伸试件断裂于不锈钢与焊缝的界面处,接头为整体脆性断裂,抗拉强度达到105MPa。 相似文献
8.
基于PATRAN/NASTRAN的复合材料结构铺层的分级优化设计方法 总被引:3,自引:1,他引:3
提出了一种用于复合材料结构铺层分级优化设计的有效方法,探讨了在当前载荷和边界条件下应变能与铺层厚度和结构质量之间的关系。在PATRAN/NASTRAN的基础上,采用直接搜索法与正交试验法相结合的优化方法,建立了一套实用的优化系统。该系统可适用于对称/非对称层合板、蜂窝夹层结构及多部件组合结构等多种结构类型;可解决多约束问题,约束条件考虑了应力、应变、最大位移、固有频率及结构屈曲失稳等多种因素。通过典型算例及工程应用,证明该系统能够取得优于其它同类算法的优化结果。 相似文献
9.
10.
11.
介绍了一种新的刚体转动的四元数模型。这些模型可以提高再定向控制的对边界条件的适应能力,在此基础上还介绍了这些模型的一些实际应用。 相似文献
12.
A. A. Davydov 《Cosmic Research》2011,49(4):335-344
A communication satellite (small spacecraft) injected into a geosynchronous orbit is considered. Flywheel engines are used
to control the rotational spacecraft motion. The spacecraft after the emergency situation has passed into a state of uncontrolled
rotation. In this case, no direct telemetric information about parameters of its rotational motion was accessible. As a result,
the problem arose to determine the rotational satellite motion according to the available indirect information: current taken
from the solar panels. Telemetric measurements of solar panel current obtained on the time interval of a few hours were simultaneously
processed by the least squares method integrating the equations of rotational satellite motion. We present the results of
processing 10 intervals of the measurement data allowing one to determine the real rotational spacecraft motion and to estimate
the total angular momentum of flywheel engines. 相似文献
13.
14.
为满足航天器微振动环境模拟的需要,开展了多自由度微振动时域波形复现控制方法研究。首先,介绍了基于时域波形复现的多自由度微振动环境模拟控制理论方法。其次,针对六自由度微振动激励系统,应用MATLAB软件建立了基于实测传递函数矩阵的多输入多输出微振动激励仿真系统,针对微振动时域波形复现闭环控制过程进行了算法编程,并给出了仿真的闭环控制流程图。最后,通过算例对多自由度微振动时域波形复现进行了数值仿真,以给定的白噪声为输入,模拟对实际存在的系统非线性、测量误差等影响因素的控制效果。仿真结果验证了多自由度微振动时域波形复现控制方法的可行性及有效性,所得结论可以为研究多自由度微振动时域波形复现控制系统提供参考。 相似文献
15.
The problem of optimal control over many-revolution spacecraft orbit transfers between circular coplanar orbits of satellites is considered. The spacecraft flight is controlled by a thrust vector of a jet engine with restricted thrust (JERT). The mass expenditure is minimized at a limited time of flight. The optimal control problem is solved based on the maximum principle. The boundary value problem of the maximum principle is solved numerically using the shooting method. A modified computation scheme of the shooting method is suggested (multi-point shooting), as well as a method (correlated with the scheme) of choosing the initial approximation with the use of a solution to the optimization problem in the impulse formulation. The scheme and method allow one to construct many-revolution spacecraft orbit transfers. 相似文献
16.
热变形对天线指向机构的指向精度具有重要影响,但利用传统的设计方法很难实现对指向精度的准确计算,尤其是热变形对指向精度影响的研究工作更是少见。为此建立了机构的三维实体热-结构耦合有限元分析模型,根据有限元分析结果并结合机构的运动链关系,构建了各关键运动副运动误差的计算方法;在此基础上实现了机构指向误差的计算,研究了运动副名义、最大以及最小配合间隙条件下,温度载荷对各关键运动副运动误差和指向精度的影响。研究结果表明,温度载荷对关键运动副的运动误差以及机构的指向精度具有重要影响,随着温度载荷偏离常温数值的增加,指向误差不断增大,名义配合间隙条件下的指向误差最大。 相似文献
17.
18.
The problem of determining an estimation of current spacecraft motion parameters on the stage of its descent is solved on the basis of readings of an optoelectronic navigation system and additional information from the self-contained inertial navigation system at the most general assumptions on the nature of motion of the object and the statistical properties of the noise of the measuring devices. 相似文献
19.
10月14日,国际空间大学董事会主席拉姆·哈迪姆访问中国航天科技集团公司,就集团公司承办国际空间大学2007年暑期进修项目的筹备情况与集团公司人力资源部部长陈学钏、副部长白燕强交换了意见。陈学钏部长向哈迪姆通报了集团公司筹备这次活动的工作进展情况。据陈部长介绍,中国 相似文献