绕跨声速三角翼的激波/涡干扰流场数值模拟

 在绕三角翼的跨声速流动中,随着迎角的增加,三角翼上的涡破裂位置会出现突然前移的现象。针对这一与亚声速下不同的流动现象,采用带曲率修正的Spalart-Allmaras(SAR)湍流模型,求解定常雷诺平均Navier-Stokes(RANS)方程,对不同迎角下绕65°后掠尖前缘三角翼的跨声速流动进行数值模拟,并在此基础上,采用基于SAR湍流模型的脱体涡模拟(DES)方法,对由激波干扰导致的前缘涡破裂位置的运动规律进行了初步探讨。模拟结果与试验结果对比表明:SAR湍流模型能准确地模拟出三角翼上的激波系统和旋涡结构,并能准确模拟出由于激波干扰导致的涡破裂位置突然前移的现象。此外,对涡破裂后流场的非定常数值研究发现,支架前端正激波的干扰作用使得涡破裂位置向下游移动比较突然,而向上游移动则相对缓慢。     

削尖三角翼涡破裂前后的气动弹性特性对比研究

大迎角气动弹性分析是现代飞行器设计中非常引人瞩目并且复杂的研究课题.采用Navier-Stokes方程求解非定常流场,耦合结构运动方程,在状态空间内实现了70°削尖三角翼涡破裂前后的气动弹性时域模拟.研究显示,前缘分离涡破裂后,流动的非定常脉动特性非常明显,这种非定常效应对机翼气动弹性特性的影响不可忽略.涡破裂前,气动...     

Review of flow control mechanisms of leading-edge vortices

Vortex control concepts employed for slender and nonslender delta wings were reviewed. Important aspects of flow control include flow separation, vortex formation, flow reattachment, vortex breakdown, and vortex instabilities. The occurrence and relative importance of these phenomena strongly depend on the wing sweep angle. Various flow control methods were discussed: multiple vortices, control surfaces, blowing and suction, low-frequency and high-frequency excitation, feedback control, passive control with wing flexibility, and plasma actuators. For slender delta wings, control of vortex breakdown is achieved by modifications to swirl level and external pressure gradient acting on the vortex core. Effects of flow control methods on these two parameters were discussed, and their effectiveness was compared whenever possible. With the high-frequency excitation of the separated shear layer, reattachment and lift enhancement in the post-stall region is observed, which is orders of magnitude more effective than steady blowing. This effect is more pronounced for nonslender wings. Re-formation of vortices is possible with sufficient amplitude of forcing at the optimum frequency. Passive lift enhancement on flexible wings is due to the self-excited wing vibrations, which occur when the frequency of wing vibrations is close to the frequency of the shear layer instabilities, and promote flow reattachment.     

细长翼绕流中的旋涡特性

 本文综述了细长翼绕流中由前缘分离形成的集中涡的各种运动特性。细长翼翼面上方的前缘集中涡是控制机翼绕流和影响机翼气动力特性的主要因素。为此本文详细介绍了前缘涡的形成及其基本流动结构;前缘涡的破裂现象及其对机翼气动力特性的影响;并给出前缘涡破裂的各种理论模型和它的估算方法。最后还简单介绍了绕流中旋涡之间的绕合现象和互相干扰的流动结构。     

流向涡与涡轮叶栅二次流相互作用研究

研究有效的流动控制手段,降低涡轮内部二次损失,对于小展弦比涡轮的气动设计具有重要意义。利用涡发生器在叶栅入口前产生流向涡,通过试验和数值方法探讨这种基于旋涡相互作用的流动控制方法对涡轮平面叶栅二次流动的作用效果,并对不同流向涡情况做对比分析。结果表明：流向涡对涡轮叶栅内部流动会产生较为显著的影响,从而影响叶栅的性能,当所产生流向涡强度和位置较为合理时,有可能通过流向涡与二次流的相互作用达到较大幅度降低二次流损失的目的。     

非定常扰动对涡破裂的影响

在旋涡发生器内进行了涡管内的涡破裂研究。试验表明,不论是泡状或是螺旋状破裂,趋近破裂点时流速均趋于零;非定常扰动使涡轴附近的轴向速度增大,从而延缓了涡破裂的发生;在定常流参数、扰动频率和振幅的适当组合下,扰动可促使破裂状态由泡状转变为螺旋状,大大推迟涡破裂的发生。初步的理论分析表明,上述现象可能来源于流动共振。文中最后还给出了水槽中前缘振动襟翼的实验结果。试验表明,襟翼振动可延缓破裂的发生,且存在一个最佳的频率。试验中还发现,大迎角时,若襟翼不振动,可交替地只在一侧产生前缘涡,襟翼振动可消除这一现象。     

Separation control on NACA23012 using synthetic jet

A numerical study of separation control has been made to investigate aerodynamic characteristics of NACA23012 airfoil with synthetic jets. Computed results demonstrated that stall characteristics and control surface performance could be substantially improved by resizing separation vortices. The maximum lift was obtained when the separation point coincides with the synthetic jet location and the non-dimensional frequency is about 1. In addition, separation control effect was proportional to the peak velocity of the synthetic jet. It was observed that the actual flow control mechanism and flow structure is fundamentally different depending on the range of synthetic jet frequency. For low frequency range, small vortices due to synthetic jet penetrated to the large leading edge separation vortex, and as a result, the size of the leading edge vortex was remarkably reduced. For high frequency range, however, small vortex did not grow up enough to penetrate into the leading edge separation vortex. Instead, synthetic jet firmly attached the local flow and influenced the circulation of the virtual airfoil shape which is the combined shape of the main airfoil with the separation vortex. As a way to reduce the jet peak velocity, performance of a multi-array synthetic jet was investigated. Moreover, a high frequency multi-location synthetic jet was exploited to efficiently eliminate the unstable flow structure which was observed in low frequency range. Finally, by changing the phase angle in multi-location synthetic jets, highly controlled flow characteristics could be obtained with multi-array/multi-location synthetic jets. This shows efficiency of the current approach in separation control using synthetic jet.     

高马赫数来流条件下斜激波与流向涡对相互作用

针对斜激波入射流向涡对形成的复杂流动干扰现象,在来流马赫数6条件下,利用后掠斜坡式涡流发生器生成流向涡对,采用数值模拟结合激波风洞实验,研究了斜激波与流向涡对相互作用引起的激波变形和旋涡演变。结果表明,斜激波与流向涡对相互作用的剧烈程度大致分为强、中、弱三种。在强相互作用下,激波面向上游凸起的程度最剧烈,呈现类“T”字型特征,其对称面处接近于一道正激波,波后出现回流区和局部流动滞止,使得流向涡对发生破碎;在中等相互作用下,对称面处存在局部正激波,但没有出现回流区;在弱相互作用下,不再出现局部正激波。进一步地分析发现,斜激波与流向涡对相互作用产生的流向涡对破碎现象,不符合经典的激波作用下单个流向涡破碎理论的预测。采用流向涡对对称面处的气流参数,对经典的流向涡破碎理论进行修正后,能够预测本文流向涡对在斜激波作用下是否发生破碎。本文为掌握激波作用下流向涡对破碎现象的规律,提供了重要参考。     

涡破裂诱导的垂尾抖振气动弹性分析

通过试验方法分析了三角翼前缘分离涡与垂尾抖振之间的关系,深入研究了尾迹流动对垂尾抖振各阶模态的激励作用。计算得到了垂尾模型固有频率及各阶模态。在风洞试验中,应用激光片光烟流场显示技术,得到了三角翼模型在风速为30 m/s下,各迎角的涡结构;使用加速度传感器测量了垂尾翼根和翼梢的抖振响应;使用热线风速仪测量了垂尾翼根和翼梢位置的脉动速度分量。结果表明:前缘涡破裂后产生的高湍流度的尾迹是垂尾抖振的直接原因,抖振边界与涡破裂的强度和位置有关;涡破裂后尾迹与垂尾产生共振,使得抖振加速度响应频率与垂尾固有频率一致;涡破裂后,在较小迎角下,尾迹对垂尾的高频振动模态的激励较为明显,在较大迎角下,涡破裂流动对垂尾低频振动模态的激励加强了。     

弹体头部形状与弹翼位置对弹翼涡破裂位置的影响

1.引言 近代战斗机和战术导弹,为获得高机动性能,一般均在大迎用下飞行.众所周知弹翼涡的破裂对大迎角导弹气动特性有着重要影响.因此影响涡破裂的因素是设计部门极为关     

涡轮间隙泄漏涡破碎对损失的影响

采用数值方法联合标准k-ω两方程湍流模型求解雷诺平均Navier-Stokes方程组,研究了不同间隙高度下GE-E³（Energy Efficient Engine）涡轮第一级动叶顶部间隙泄漏涡（TLV）的破碎特性及其对泄漏损失的影响。首先描述了泄漏涡的破碎现象,并对其动力学特性进行了理论分析,接着研究了间隙高度对泄漏涡结构及破碎特性的影响,最后对泄漏涡破碎与损失的关系进行了探讨。研究结果表明：涡轮叶顶间隙泄漏涡具有不稳定特性,当泄漏涡具有足够的强度可以克服通道涡卷吸形成完整涡结构时,在叶片后半部分逆压区发生了涡破碎现象,带来了额外的涡破碎损失;间隙高度对泄漏涡破碎位置的影响比较明显,在大间隙下泄漏涡趋于相对稳定;叶顶泄漏流产生的掺混损失以泄漏涡的破碎为标志分为两个阶段,大量的掺混损失发生在泄漏涡破碎之后,这也是叶顶泄漏流产生损失的主要部分。     

扩压叶栅叶尖非定常流动的涡动力学机理

为了揭示压气机叶尖区旋涡结构与流动非定常性之间的关联，采用URANS对一亚声速平面扩压叶栅在不同攻角下的流场进行了求解，并借助Q判据提取了叶尖瞬态涡系结构。结果表明：泄漏涡的破碎现象能够通过诱导新的涡结构间接作用于相邻通道的叶尖流动，是导致叶尖流场失稳的关键因素。在-0.3°和+0.7°攻角下，叶尖泄漏涡发生了螺旋破碎，并伴随有非定常诱导涡的出现，诱导涡对相邻叶片载荷的影响使得叶尖泄漏涡发生周期性摆动；在+1.7°攻角下，泄漏涡破碎会导致反流涡的形成，反流涡的输运会给叶片载荷和来流攻角带来非定常扰动，反过来又会作用于泄漏涡的破碎和反流涡的生成，最终表现为一种自维持的非定常流动现象。     

展向射流控制机翼前缘涡的机理及其应用

旋涡和流动分离的控制一直是空气动力学研究的一个重要。研究表明展向吹气是控制机翼上旋裂和流动分离的一种十分有效的气动措施。     

Unsteady aerodynamics of nonslender delta wings

Unsteady aerodynamics of nonslender delta wings, covering topics of shear layer instabilities, structure of nonslender vortices, breakdown, maneuvering wings, and fluid/structure interactions, are reviewed in this paper. Vortical flows develop at very low angles of attack, and form close to the wing surface. This results in strong interactions with the upper-surface boundary layer and in a pronounced dependence of the flow structure on Reynolds number. Vortex breakdown is observed to be much less abrupt compared to breakdown over slender wings. This results in challenges for the precise determination of vortex breakdown location and the interpretation of flow visualizations. One of the distinct features of nonslender wings is the location of the primary attachment zone outboard of the symmetry plane. Reattachment location correlates with the wing stall process and increased buffeting. Dramatic fluid/structure interactions emerge with increasing wing flexibility and result in substantial lift enhancement in the post-stall region. This recently discovered phenomenon appears to be a feature of nonslender wings. Rigid delta wings undergoing small amplitude oscillations in the post-stall region exhibit many similarities to flexible wings, including reattachment and re-formation of the leading-edge vortices. Unusual self-excited roll oscillations have also been observed for free-to-roll nonslender wings.     

旋涡运动研究的某些进展

 本文简要介绍研究旋涡运动在以下问题上的某些结果:低速不同后掠角三角翼在各个迎角下的九种分离流类型及其边界;应用微分方程定性论与拓扑学对三维分离流与旋涡流的分析;旋涡破裂形态,对三角翼前缘涡破裂的实验研究与理论分析;受控分离与旋涡的干扰,二旋涡的位移、绕转与合并等。     

Vortex breakdown: Observations and explanations

Some three decades have elapsed since the phenomenon of vortex breakdown was first observed in the leading-edge vortices trailing from delta wings. Shortly after these early observations, instability, wave propagation and flow stagnation were proposed as key elements, if not explanations, for vortex breakdown. In the meantime a great deal of theoretical, numerical and experimental work has been reported, much of the latter concerned with the breakdown of vortex flows in tubes. Even so, there is still nothing approaching a complete theory of vortex breakdown, and no general agreement as to its fundamental nature. In the present review we give an overview of vortex- breakdown research to date of the current level of understanding and assess, in the light of the available experimental evidence, the various theoretical proposals which have been made over the years.     

Transonic wing stall of a blended flying wing common research model based on DDES method

Numerical simulation of wing stall of a blended flying wing configuration at transonic speed was conducted using both delayed detached eddy simulation(DDES) and unsteady Reynolds-averaged Navier-Stokes(URANS) equations methods based on the shear stress transport(SST) turbulence model for a free-stream Mach number 0.9 and a Reynolds number 9.6 × 10~6. A joint time step/grid density study is performed based on power spectrum density(PSD) analysis of the frequency content of forces or moments, and medium mesh and the normalized time scale0.010 were suggested for this simulation. The simulation results show that the DDES methods perform more precisely than the URANS method and the aerodynamic coefficient results from DDES method compare very well with the experiment data. The angle of attack of nonlinear vortex lift and abrupt wing stall of DDES results compare well with the experimental data. The flow structure of the DDES computation shows that the wing stall is caused mainly by the leeward vortex breakdown which occurred at x/x_(cr)= 0.6 at angle of attack of 14°. The DDES methods show advantage in the simulation problem with separation flow. The computed result shows that a shock/vortex interaction is responsible for the wing stall caused by the vortex breakdown. The balance of the vortex strength and axial flow, and the shock strength, is examined to provide an explanation of the sensitivity of the breakdown location. Wing body thickness has a great influence on shock and shock/vortex interactions, which can make a significant difference to the vortex breakdown behavior and stall characteristic of the blended flying wing configuration.     

Unsteady flow phenomena associated with leading-edge vortices

This paper presents selected results from extensive experimental investigations on turbulent flow fields and unsteady surface pressures caused by leading-edge vortices, in particular, for vortex breakdown flow. Such turbulent flows may cause severe dynamic aeroelastic problems like wing and/or fin buffeting on fighter-type aircraft. The wind tunnel models used include a generic delta wing as well as a detailed aircraft configuration of canard-delta wing type. The turbulent flow structures are analyzed by root-mean-square and spectral distributions of velocity and pressure fluctuations. Downstream of bursting local maxima of velocity fluctuations occur in a limited radial range around the vortex center. The corresponding spectra exhibit significant peaks indicating that turbulent kinetic energy is channeled into a narrow band. These quasi-periodic velocity oscillations arise from a helical mode instability of the breakdown flow. Due to vortex bursting there is a characteristic increase in surface pressure fluctuations with increasing angle of attack, especially when the burst location moves closer to the apex. The pressure fluctuations also show dominant frequencies corresponding to those of the velocity fluctuations. Using the measured flow field data, scaling parameters are derived for design purposes. It is shown that a frequency parameter based on the local semi-span and the sinus of angle of attack can be used to estimate the frequencies of dynamic loads evoked by vortex bursting.     

变攻角下被动射流旋涡对高速扩压叶栅性能的影响

对被动射流旋涡(PJV)控制高速扩压叶栅内的流动分离控制展开数值研究,并探究其在变工况条件下的适应特性。结果表明,PJV在设计攻角下可使叶栅总压损失系数降低5.2%,变攻角条件下的损失降低幅度最高可达7.8%,表明其具有较高的控制效率和良好的变工况适应特性。随着攻角的增大,吸力面分离位置提前,射流出口与分离区间的距离减小,PJV能够更为有效地促进附面层内低能流体与主流间的动量交换,使得壁面涡结构得到重新组织,并进一步影响通道涡、集中脱落涡等涡系结构的发展,从而推迟流动分离、减小损失。在综合考虑变攻角流场特性的前提下,应使PJV的作用位置位于分离区上游不远处,所研究的最佳射流位置位于叶片前缘上游40%轴向弦长处。      

Turbulent and unsteady flow characteristics of delta wing vortex systems

This paper presents an overview of experimental investigations on a 65 deg swept delta wing as part of the International Vortex Flow Experiment 2 (VFE-2). Results obtained in low-speed wind tunnel facilities include oil flow and laser light sheet flow visualization, mean and unsteady surface pressure distributions as well as mean and turbulent velocity components of the flow field and close to the wing surface. Thus, field and near wall distributions of all components of the Reynolds stress tensor are available. Details of the delta wing vortex structure and breakdown phenomenon are discussed and analyzed. Vortex bursting leads to specific spectral densities of velocity and surface pressure fluctuations characterized by narrow band distributions associated with the helical mode instability of the vortex breakdown flowfield. Further, special emphasis is on the occurrence of an inner vortex detected for the low Reynolds number and Mach number regime. This inboard vortex results from a laminar separation close to the apex due to the spanwise pressure gradient in the area of relatively large thickness while the classical leading-edge vortex progressing from the rear part to the apex is fed from the turbulent shear layers shed at the wing upper and lower side.