恒定建立时间数字AGC环路设计

针对传统恒定建立时间数字AGC(自动增益控制)环路实现方式复杂、成本高的问题,基于AGC环路的对数模型,推导出AGC环路建立时间恒定的条件,提出采用线性放大器实现恒定建立时间AGC环路的方法,该方法能够在数字实现上省去传统方式的指数运算单元,降低了实现复杂度和成本。另外,对于非突跳或突跳幅度较小输入信号,利用输出信号平方检测代替对数功率检测,省去传统方式的对数运算单元,进一步降低了实现复杂度和成本。通过上述2种改进,提出了一种简单的恒定建立时间数字AGC环路设计方法。Simulink仿真证明了该设计方法的正确性。该方法应用于无线数字接收机中,能够简化设计,节约成本。     

量化对GPS接收机捕获性能影响的研究

由于接收机输入端的信噪比对接收机的捕获性能具有很重要的意义,所以要尽量减少接收机输入端信噪比的损失。本文首先给出了含高斯白噪声的GPS信号经过不同量化位数和量化电平的量化器后的输出信噪比计算公式;然后,在此基础上分析其对接收机捕获性能的影响;最后,仿真实验表明,接收机可以在不影响捕获性能的情况下,尽量选择合适的量化位数和量化门限。实验结果也为量化器的设计提供了重要的技术参考。     

通信接收机中数字自动增益放大器模块的设计

设计了一种通用结构的数字自动增益放大器(AGC)模型,用Matlab工具搭建该自动增益放大器算法模型并仿真,随后用硬件描述语言(HDL)描述了AGC模块的硬件模型,并用Modelsim工具对其进行仿真与验证。通过对Matlab算法模型和HDL硬件模型的仿真结果分析,可以看出该通用结构的AGC能在短时间内调节输出信号的动态范围,为后续的电路提供稳定的数据输入。     

某于功率反馈的涡轴发动机神经网络PID控制研究

通过对功率平衡关系进行分析,提出了利用功率反馈设计智能神经网络PIO控制器的方法。基于BP(Back Propagation)神经网络,将功率信号作为神经网络的输入层信号,并改进了网络权值的学习规则。通过在线整定PID参数,控制器能够根据功率误差信号的变化实时调整控制参数,从而使系统自主寻找到功率平衡点,具有良好的稳态和动态响应特性。仿真结果表明：该方法可以使涡轴发动机在全包线范围内具有理想的控制性能。     

基于功率反馈的涡轴发动机神经网络PID控制研究

通过对功率平衡关系进行分析,提出了利用功率反馈设计智能神经网络PID控制器的方法。基于BP（Back Propagation）神经网络,将功率信号作为神经网络的输入层信号,并改进了网络权值的学习规则。通过在线整定PID参数,控制器能够根据功率误差信号的变化实时调整控制参数,从而使系统自主寻找到功率平衡点,具有良好的稳态和动态响应特性。仿真结果表明：该方法可以使涡轴发动机在全包线范围内具有理想的控制性能。     

基于阻尼补偿的直流发电机带恒功率负载系统稳定性分析

提出了一种提高基于阻尼补偿的直流(DC)发电机带恒功率负载(CPL)系统稳定性的方法.依据输入滤波器输出阻抗极大值最小原则对基于阻尼补偿的直流发电机带恒功率负载系统输入滤波器参数进行了最优设计,给出了设计方法和流程.运用Bode图和Nyquist曲线对基于阻尼补偿的直流发电机带恒功率负载系统进行稳定性分析,并与在输出端...     

高速数据采集和CCD数据变换技术

本文讨论的是高速数据采集技术问题,其中重点阐明利用 CCD(电荷耦合器件)作为模拟一数字变换器(ADC)的中间暂存器,把高速变化信号采样后的信息按顺序快速输入 CCD 中暂存起来,供给低速的 ADC 变换,变成二进制数字量。这种利用 CCD 器件采用快入慢出(FISO)工作方式是解决高速模拟量变换成相应数字量的最新技术。它可以把 ADC 变换率提高到100MHz,而成本却提高很小。     

基于预测扭矩前馈的涡轴发动机内模控制方法

基于内模原理设计了涡轴发动机功率涡轮转速控制器.针对主旋翼扭矩变化对功率涡轮转速的干扰,提出了一种基于极端学习机的扭矩预测方法.极端学习机训练基于动态仿真数据,其输入通过相关分析获得.基于内模原理的功率涡轮转速控制器采用极点配置的设计方法,将输入信号的内模直接加入控制器,实现鲁棒跟踪.扭矩前馈采用比例微分(PD)控制策略,实现对发动机负载变化干扰的有效补偿.数字仿真结果表明:极端学习机扭矩预测精度高,扭矩相对误差小于1.5‰,与不加前馈控制相比,所提出的控制方法减小了机动飞行过程中功率涡轮转速的超调或下垂30%以上.      

基于稀疏表示的双基地MIMO雷达多目标定位及幅相误差估计

 基于稀疏表示理论,提出一种新的双基地多输入多输出(MIMO)雷达收发角度及幅相误差估计算法。利用接收数据,分别构造发射和接收协方差矩阵,并以列向量化后的发射和接收协方差矩阵为量测信号建立2个一维稀疏线性模型,构造模型求解的 L₂-L₁ 混合范数优化目标函数,通过交替迭代寻优获得目标角度估计和幅相误差估计,最后给出了本文算法的收敛性分析。与现有算法相比,该算法充分利用了目标发射和接收空域的稀疏特性,且能够通过对噪声功率的预估计来抑制噪声。仿真结果表明:在低信噪比(SNR)条件下,本文算法仍能够得到较好的估计精度,且对幅相误差具有一定的稳健性。     

输入量化下航天器位姿一体化预设时间控制

航天器在轨抢修或维护等空间近距任务中，往往要求执行任务的航天器在限定的时间窗口和有限通信带宽的条件下，实现对目标的位姿跟踪。针对其姿轨耦合控制问题，提出了一种带有输入量化的姿轨一体化预设时间控制方法。首先，在Lie群SE(3)框架下，建立了相对运动航天器位姿一体化误差动力学模型。其次，引入了输入量化机制，减小控制器到执行机构间的通信频次。接着，基于推导的实际预设时间稳定引理，结合反步法设计了一种非奇异预设时间位姿跟踪控制器。为提高系统鲁棒性，设计新型自适应律估计并补偿系统总扰动，并利用量化器参数抑制量化误差；该方法能够在不依赖系统初始状态、输入量化和扰动信息未知的情况下实现预设时间内稳定，且稳定时间上界可由一个控制参数预先设定。然后，基于Lyapunov理论证明了系统的稳定性。最后，数值仿真结果验证了该方法的有效性。     

ADC1210型12位A/D转换器的应用开发

 一、引言 ADC1210是美国National Semiconductor公司生产的一种低功耗、中速、低价格的12位二进制码（原码、或反码、或偏置码）逐次逼近式A/D转换器。该器件采用CMOS工艺和薄膜工艺相结合的微电子技术制成。器件中包含了R-2R梯形薄膜电阻网络、CMOS模拟开关和逐次逼近逻辑电路、以及场效应管电压比较器等有关电路。其基本技术指标为分辨     

Phase-Lock Loop Jump Phenomenon in the Presence of Two Signals

Jump phenomena are known to exist in many non-linear systems [I], [2], [3]. The non-linear analysis presented in this paper explains and predicts the conditions for the jump phenomenon that is observed in a phase-locked loop (PLL) preceded by an automatic gain control (AGC). The jump phenomenon occurs when the frequency separation AM of two sinusoids at the input to the AGC is greater than the bandwidth B of the linearized PLL. If the loop is initially locked to the stronger signal, the weaker signal will frequency-modulate the PLL voltage-controlled oscillator (VCO) with a modulation frequency AI. The amplitude S2 of the weaker signal al can be increased until it becomes greater than the amplitude Si of the signal being tracked, without causing the loop to lose lock; i. e., the VCO continues to track the original signal. However, if the ratio of the amplitudes S2 S1 = R is increased above some critical value RC > 1, the loop will lose lock on the original signal, and jump to track the interfering signal. If the frequency separation is at least twice the PLL bandwidth, a good approximation for this critical ratio is Rc ? ?w/B.     

新型Σ-Δ多通道动态测试分析系统研究与实现

 动态测试与分析系统需要动态范围（DRN）大、信噪比（SNR）高,传统方法实现复杂且成本高。本文分析了Σ-Δ调制的动态特性,提出基于Σ-Δ ADC(模-数转换器)ADS1271,Σ-Δ DAC（数-模转换器）AIC23及浮点数字信号处理器（DSP）芯片TMS320C6713的新型高精度动态测试与分析系统,实现了多通道实时动态测试与分析,系统具有24位采集精度,8通道可级联基本模块,实时频率细化FFT（Zoom-FFT）、功率谱密度（PSD）等分析功能, 正弦、瞬态扫频、随机和冲击响应谱等信号源功能以及高速USB2.0数据传输功能。系统用于振动、冲击、噪声工程等测试与分析系统,可取代国外最新产品。     

Properties of Low Precision Analog-to-Digital Converters

The problem of quantization and saturation noise introduced by the process of analog-to-digital conversion is addressed. Analog-to-digital converters (ADC) with even versus odd numbers of output states are compared. Expressions are derived and evaluated which yield the signal-to-noise ratio and the gain versus signal level input when the input signal has an assumed Gaussian probability density. The results presented should have application in all fields in which digital signal processing is performed.     

Postfiltering in Digital Beamformers

Assuming a sinusoidal signal superimposed on a narrow-band Gaussian noise as the input to a receiving array, the output power and signal-to-noise ratio of a digital beamformer with postfiltering were formulated so that subsequent calculations could be made without an analysis in the frequency domain. The formulation utilized the quantizer functions previously given by the author and certain spectral power distribution factors originally attributed to Davenport but more rigorously derived and discussed in the present work. A numerical study based on this formulation for a DIMUS array in a correlated noise field reveals that except for certain rare circumstances, postfiltering generally improves the output SNR or array gain. It is demonstrated that the amount of postfiltering gain not only varies with array input SNR but also depends strongly upon the spacing-to-wavelength ratio, and its meaningful interpretation can only be made in conjunction with both the clipping and noise correlation losses. In particular, balancing postfiltering gain against the two losses suggests that receiving arrays with element spacings smaller than one-half of the operating wavelength may be used to the advantage of system design under certain conditions.     

应答机测距转发性能分析

分析了采用视频AGC（自动增益控制）、射频AGC和限幅器等3种测距转发模式的应答机性能,分析结果表明：视频AGC模式下,应答机测距通道的输出功率恒定,测距转发性能不随上行信号强度变化而变化;射频AGC模式下,应答机测距通道的输出功率不恒定,测距转发性能随着上行信号强度变化而变化;而限幅器模式可看作射频AGC的一种特殊情况。仿真分析了我国研制的限幅器和射频AGC两种模式应答机的性能,结果表明理论计算的性能与实测结果一致,理论分析正确且理论分析结果可作为链路计算的依据。     

Optimum gain control for A/D conversion using digitized I/Q data inquadrature sampling

Calculation of optimum gain for minimum distortion due to A/D (analog-to-digital) conversion requires the estimation of the input signal strength. To use a common AGC (automatic gain control) for both the I/Q (in-phase and quadrature) signals, it is efficient to estimate the input signal strength using the quantized A/D output from both channels. Assuming a Gaussian input, the relationship between σ of the input of the A/D converter and E(|x|+|y|) and E(max(|x|,|y|)+1/2 min (|x|,|y|)) for t quantized I/Q output x and y is derived. Numerical results obtained using the derived expression and the statistical data obtained through simulation show excellent agreement. It is concluded that, because of its simplicity, the cubic equation obtained by fitting the numerical results should be useful     

Analog clutter cancellation algorithms for dynamic range reduction

A technique that effectively reduces the dynamic range of the input signal in a radar receiver prior to digitization is presented. The dynamic range reduction is accomplished through a process that predicts the next radar return signal from the previous return signals, generates a replica waveform, and subtracts this replica waveform from the radar return signal prior to digitization. This process allows the radar return signal to be digitized without distortion by an analog-to-digital converter (ADC) having a limited dynamic range. The full dynamic range of the radar return signal is then restored by adding the replica waveform to the ADC output. Test and evaluation results using both synthetic and recorded radar data demonstrate in excess of a 30-dB reduction in the dynamic range of the signal at the ADC input when strong clutter is present     

A composite disturbance observer and H_∞ control scheme for flexible spacecraft with measurement delay and input delay

In this paper, the attitude control algorithm of flexible spacecraft with unknown measurement delay and input delay based on disturbance observer is designed. The influence of measurement delay and input delay on the attitude control system and disturbance observer is analyzed. The disturbance estimation error equation is transformed into a differential system with a pure delay. Then, the observer gain is chosen based on the 3/2 stability theorem to ensure the stability and disturbance attenuation performance of the pure delay system. Next, the controller gain is designed based on the Linear Matrix Inequality(LMI) approach to guarantee the stability of the composite system and achieve H_∞ performance with two additive delays. The simulation results show that the proposed method can improve the anti-disturbance ability of the attitude control system.