共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
通用大气飞行器的参数化气动布局研究 总被引:2,自引:1,他引:2
提出了一种新的升力体类通用大气飞行器布局方案.应用基于二次曲线的模线设计方法,通过二次曲线的控制点和形状参数实现参数化外形建模,构造适用于通用大气飞行器的升力体布局方案,提高飞行器气动布局方案的设计效率,为进一步的气动特性计算和布局方案设计优化奠定基础.采用修正的内伏牛顿流理论,对通用大气飞行器进行高超声速气动特性计算,并进行了质心设计,获得的高超声速稳定配平升阻比达到3.5以上.进行了控制舵面设计和控制效率的计算分析. 相似文献
4.
参考国内外高升阻比飞行器气动布局设计经验,针对进出空间飞行器的气动特性要求,开展跨速域高升阻比融合升力体气动布局(BLB)研究以适应进出空间飞行器的各种要求,在传统的翼/身外形的气动效率与纯升力体高容量效率之间寻求平衡。研究表明通过构建融合升力体数模,研究气动外形的系统参数化描述方法,选择设计变量及变化范围,研究优化算法,建立融合升力体气动布局设计及优化工具,开展融合升力体气动外形优化设计是一种值得深入探讨的研究方法。本文主要通过优化平台集成数模参数化程序、网格自动化及基于Euler方程的快速流场求解程序进行优化设计并对优化结果进行分析计算,发展了一种快速有效的气动布局优化设计方法,设计了初步满足设计要求的新型高升阻比融合升力体气动布局。设计的新布局能为再入飞行器气动布局设计提供参考,所发展的优化设计方法计算速度快,成本低,可以为走向工程实用化的复杂外形气动布局优化设计打下技术基础。 相似文献
5.
《空气动力学学报》2017,(4)
通过调研和梳理国内外可重复使用天地往返运输系统的方案、任务剖面、气动布局、气动特点以及飞行性能等发展情况,综合使用二次曲线方法与基于类型函数和形状函数的CST方法,提出一种具有较好的继承性和可持续自主创新发展的新型的可重复使用天地往返升力体飞行器概念(FL-T1)。通过对其进行全速域的升阻特性、压心与质心布置、稳定性分析等,全面掌握了该升力体布局的气动特性。通过对该布局控制舵的匹配设计,研究了飞行器的操纵效率问题。通过多目标优化设计的思想,发展和完善了多目标优化计算方法和软件。针对本文提出的可重复使用天地往返升力体飞行器概念(FL-T1),开展了考虑气动力/气动热综合的多目标优化,获得了性能较优的优化布局。研究表明,该新型气动布局概念具有较大的高超声速配平升阻比、较好的减速特性、可接受的气动热环境、较好的高超声速稳定性和气动控制效率,可以作为未来可重复使用天地往返飞行器的潜在可行方案。在综合性能上,通过本文发展的多目标优化软件优化获得的一系列气动布局方案较初始气动布局,在所关注的方面均有显著的改进,可作为一系列备选方案供设计者选择。 相似文献
6.
分析了国内外吸气式可重复使用天地往返运载器的研究现状,在此基础上提出了一个水平起飞和着陆的单级吸气式运载器方案.采用Euler方程数值解法Dahlem-Buck公式和切楔法对该方案气动布局的亚、跨、超、高超音速气动特性进行了计算分析,由结果可见建立的气动布局可以满足总体方案设想中飞行任务的要求.对该方案拟采用的火箭基组合循环发动机(RBCC)进行了详细分析和性能计算,并在此基础上对该方案的飞行弹道进行了计算分析,通过与采用纯火箭发动机动力的天地往返运载器的飞行弹道对比表明,该方案能明显减小运载器的燃料消耗. 相似文献
7.
8.
9.
10.
为研究对固体运载器总体性能提升有利的发动机内弹道设计方法,建立了发动机内弹道计算模型,并选取两个燃面设计参数表征内弹道曲线构型。针对某三级固体运载器进行了仿真分析,分别以发动机冲质比最大及运载器射程最大为目标对发动机的内弹道曲线构型进行优化设计,并对这两种设计方法进行对比研究。研究结果表明,发动机性能最优并不一定会实现运载器总体性能最优,以运载器射程最大为目标,对发动机内弹道曲线构型进行优化设计,可显著提高运载器总体性能。研究成果可应用于固体运载器总体方案初步论证阶段,提升固体运载器的性能水平及方案论证效率,使固体运载器总体设计方案更具时效性和竞争性。 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
13.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
14.
15.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
16.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
17.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献
18.
Integrated Entry Guidance for Reusable Launch Vehicle 总被引:2,自引:2,他引:0
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
19.
Wu Xianyu Li Xiaoshan Ding Meng Liu Weidong Wang Zhenguo 《中国航空学报》2007,20(6):488-494
In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances. 相似文献
20.
(高)超声速流动试验技术及研究进展 总被引:1,自引:1,他引:1
近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。 相似文献