Protection of PSK Communication Systems with Adaptive Arrays

The performance of binary phase-shift-keyed (BPSK), binarydifferential phase-shift-keyed (DPSK), and quadrature phase-shift-keyed(QPSK) communication systems that use adaptive arrayantennas for interference rejection is examined. The case where thedesired signal is corrupted by continuous wave (CW) interference isspecifically addressed. The performance of the adaptive array andthe ideal BPSK, DPSK, and QPSK detectors are evaluated first andthe results of these calculations are combined to determine theoverall system performance. The bit-error probability at the systemoutput is used as the performance measure. Several examples arepresented which illustrate the effects of signal powers, arrivalangles, frequencies, and the array input bandwidth.     

Adaptive Array Bandwidth with Tapped Delay-Line Processing

The bandwidth of adaptive arrays with tapped delay lines behind the elements is examined. Such processing offers improved bandw over that attainable with quadrature hybrid processing. The performance of a two-element array with four types of processing (equarature hybrids, single delay lines, 3-tap delay lines, and 5-tap delay lines) is compared. It is shown that with half-wavelength element spacing, a quadrature hybrid and single delay-line processor are inadequate at 10-percent bandwidth. A 3-tap processor is adeq however, up to 40-percent bandwidth.     

Cancellation of specular and diffuse jammer multipath using ahybrid adaptive array

It has been demonstrated that specular or diffuse jammer multipath can be canceled to a desired level by using an adaptive array that combines bandwidth partitioning with tapped delay lines. Such hybrid systems are studied. In particular, the author studies an ideal two-element array that uses bandwidth partitioning in both the main and auxiliary channels, with an Mth-order adaptive finite impulse response filter in each subband of the auxiliary. The ability of this system to cancel specular moderately diffuse and diffuse multipath is studied. The combinations of bandwidth partitioning and filter order that can achieve a specified jammer cancellation level are discussed     

On Optimizing Array Reception of Multipath

This paper reviews system configuration requirements and analyzes detectability performance characteristics for maximum likelihood array reception of multipath. Performance is analyzed to determine the effects of channel multipath structure (multipath delay and signal power division among the paths), space-time correlation properties of the incident processes, and the array spacing. It is shown by a series of case studies, that for single element coupling, as well as array coupling, an increased multipath delay factor results in decreased system detectability for fixed signal and noise intensity levels. The performance capacity is degraded as the available signal power tends to distribute more uniformly between the paths. These effects are attributed to the loss of effective signal energy concentration, resulting in a lower effective pre-detection signal-to-noise ratio. An investigation of the effects upon system performance, due to array element spacing, shows that performance is enhanced by increasing the spacing relative to the multipath delay factor and the reciprocal signal bandwidth. The former is the result of a more directive detectability (beam) pattern arising from the increased spacing. In effect, with increased spacing, the main lobe of the pattern is narrowed, while the side lobes are optimally suppressed by the required noise related array element link, frequency filters (weights).     

Specification and Performance of Passive Sonar Spectral Estimators

The application of existing estimation theory to the problem of specification and performance of passive sonar spectral estimators is considered. The classification function is addressed, so that the signal is assumed to be present, and so that the energy arrival angle is known. The spatial filter considered is a line array of M equally spaced omnidirectional hydrophones. Signal and ambient noise are both zero-mean, wide-sense, stationary Gaussian random processes that differ in their spatial correlation across the face of the array. The signal is a plane wave that can be made totally spacially corrected between array elements by inserting delays between sensors to invert the signal propagation delay. The noise correlation is a function of frequency, bandwidth, element separation, and the relative time delay between sensors. Under these assumptions, the Cramer-Rao lower bound is derived for the class of unbiased estimates of signal power in a narrow frequency band at the hydrophone in the presence of correlated ambient noise of known power. The bound is examined numerically, resulting in a threshold phenomenon with M that constitutes a new design consideration. In addition, there is a striking insensitivity to realistic values of ambient noise correlation, and there are ranges in signal-to-noise ratio for which one gains more by increasing M than by increasing the bandwidth-time product. Specific processors, including a new unbiased estimator when noise power is unknown, are developed.     

Use of the Tapped Delay Line Adaptive Array to Increase the Number of Degrees of Freedom for Interference Suppression

A conjecture is made that a tapped delay line adaptive array of K elements can be used to suppress more than K - 1 noncoincidentcenter frequency interferers when the interferers operate within afraction of the signal bandwidth. This is possible because of theavailability in the increased number of degrees of freedom. Asimulation study is made verifying this conjecture for the case of atwo-element array and two interferers. Three and five tap sectionsare used in the simulation. The study indicates that the performanceimproves with increasing number of taps.     

Simple Eigenvalue-Equalizing Preprocessor for Broadband Power Inversion Array

By expressing the input autocorrelation function in a power series of bandwidth, this paper derives a small bandwidth firstorder approximation for the covariance matrix of the broadband tapped delay line power inversion array. The structure of the associated eigenvalues is then deduced, giving (number of taps)/2 sets of eigenvalues, the eigenvalues in the ith set being proportional to (bandwidth)2(i-1). Thus a simple transformation preprocessor which depends only on the bandwidth, tap spacing, and number of taps is derived for eliminating the spread of eigenvalues due to the use of tapped delay line processing.     

GNSS干扰信号检测方法研究

研究了GNSS导航接收机在干扰源条件下的干扰检测和识别技术。除常见的卫星干扰如脉冲干扰、扫频干扰、BPSK干扰、宽带高斯白噪声干扰外,还添加了QPSK和8PSK干扰进行建模分析,并提取了常见的特征参数,如信号3dB带宽和频谱峰度等。通过研究,高阶累积量被提取作为MPSK干扰类内识别的特征参数。研究了基于决策树和BP神经网络等分类器算法的干扰盲识别,并分析比较了这些分类算法的识别准确率,为抗干扰领域的研究提供了重要参考。     

The Segmented Aperture Synthetic Aperture Radar (SASAR)

A new concept in synthetic aperture radar, called SASAR, which uses a segmented aperture, is described. Use of the segmented aperture allows appreciable extra receiving antenna gain to be realized. Each subarray of the receive antenna is equal in length to the transmit antenna; the system performance is increased approximately by a factor equal to the number of subarrays. To allow array combination of the subarray signal outputs requires a phase-shift factor (varying with azimuth) to be applied to each subarray signal. A digital implementation of this preprocessor is sketched out; it uses a push-down storage stack to store the range histories for a synthetic aperture from each subarray. Appropriate phase shifts are added to the stacks and a sum of stack values then provides the combined output range history sequence. Possibilities of using analog delay lines for preprocessing are also discussed. Pattern errors due to subarray size and receive array near field are examined and constraints are given.     

Adaptive Array Behavior with Periodic Envelope Modulated Interference

A method is presented for determining the effects of envelope modulated interference on a least mean square (LMS) adaptive array. The interference is assumed to have periodic envelope modulation with a bandwidth that is small compared with the carrier frequency. For such interference, the method allows one to calculate the periodic steady-state behavior of the array weights and the resulting array performance. As an example, we compute the effects of an ordinary amplitude modulated (AM) interference signal on the array. It is shown that such interference causes the array to modulate the desired signal envelope but not its phase. With a differential phase-shift-keyed (DPSK) desired signal, AM interference is found to have about the same effect on bit error probability as CW interference.     

The Effect of Differential Time Delays in the LMS Feedback Loop

The effect of differential time delay in the feedback loops of an LMS adaptive array is examined. Differential time delay is shown to have two effects on array performance. First, it causes the weights to oscillate during weight transients. Second, it degrades the output signal-to-interference-plus-noise ratio (SINR) from the array. Weight oscillation occurs when the phase shifts in the LMS loop are not matched at the signal carrier frequency. SINR degradation depends on signal bandwidth: the wider the bandwidth, the larger the degradation.     

Wideband Interference Cancellation in Adaptive Sidelobe Cancellers

This paper presents numerical results from a study of sidelobe cancellers operating against wideband interfering signals. The study was designed to provide information that would be useful to system designers. Among other things, we address the question of whether it is best to enhance the bandwidth capability of the canceller by using tapped delay lines or simply by using more auxiliary elements. We also develop guidance rules to help the designer determine the number of adaptive loops required for a given environment.     

Probability of error for BPSK modulation from electrostaticinterference [in orbital situation]

In an orbital situation any spacecraft is bombarded by charged particles that span a broad range of energies. Some of the particles may be trapped within the materials of the spacecraft. Recent data indicates that an S-band phased-array antenna on a spacecraft may experience electrostatic discharges from such ion deposition at the elements of the array. These discharges may induce RF interference of sufficient magnitude to degrade transponder performance. This issue is addressed by considering the degradation to a binary phase shift keying (BPSK) signal. A simple model for the electrostatic phenomenon is described, and error probabilities are evaluated. The discharges and induced pulse rates are shown to be well below the interference level     

Adaptive Array Behavior with Periodic Phase Modulated Interference

We consider a least mean square (LMS) adaptive array [1] receiving a phase modulated interference signal. The phase modulation is assumed to be periodic and to have finite bandwidth. Under these assumptions, we determine the time-varying array weights, the modulation on the array output desired signal, and the time-varying output interference-to-noise ratio (INR) and SINR (signal-to-interference-plus-noise ratio). We present numerical results describing the behavior of a 2-element adaptive array that receives an interference signal with sinusoidal phase modulation. We show how each signal parameter (arrival angle, power, modulation index, and modulation frequency) affects the performance of the array.     

The Effect of a Pulsed Interference Signal on an Adaptive Array

The performance of a least mean square (LMS) adaptive array in the presence of a pulsed interference signal is examined. It is shown that a pulsed interference signal has two effects. First, it causes the array to modulate the desired signal envelope (but not its phase). Second, it causes the array output signal-to-interferenceplus-noise ratio (SINR) to vary with time. The desired signal modulation is evaluated as a function of signal arrival angles, powers and interference pulse-repetition frequency (PRF) and pulsewidth. It is shown that the signal modulation is small except when the interference arrives close to the desired signal. To evaluate the effect of the time-varying SINR, it is assumed that the array is used in a differential phase-shift keyed (DPSK) communication system. It is shown that the SINR variation causes a noticeable but not disastrous increase in the bit error probability.     

A sampling-based approach to wideband interference cancellation

Classical adaptive array schemes which use only complex spatial weights are inherently narrowband and consequently perform poorly when attempting to suppress wideband interference. The common solution to this problem is the use of tapped delay line filters in each spatial channel to facilitate space-time adaptive processing (STAP). The higher performance provided by the STAP architecture comes at the cost of a considerable increase in complexity. This paper presents a simpler technique based on programmable time adjustable sampling (TAS) that provides a limited number of wideband degrees of freedom. Two TAS methods are introduced: TAS-sidelobe canceler (TAS-SLC) is based on the sidelobe canceler, while TAS-minimum variance beamformer (TAS-MVB) is derived from the minimum variance beamformer. TAS is implemented by adjusting the sampling instant at selected array channels. TAS-SLC consists of controlling the sampling in the main channel of the sidelobe canceler With TAS-MVB array complex weights are substituted with TAS time delays. The performance of TAS methods with wideband interference is compared to the conventional sidelobe canceler and minimum variance beamformers. It is shown that TAS-SLC provides better performance than the sidelobe canceler, while TAS-MVB outperforms the minimum variance beamformer     

An Analog Open-Loop Adaptive-Array Antenna System

A new open-loop adaptive-array system with excellent transient behavior is presented. The system is constructed of analog circuits and determines complex weights without using the feedback of the array output. The performance attainable with the system is described in detail. It is shown that the convergence rate of the system does not depend on a noise environment but is determined by the time constant of the low-pass filters included. Moreover, it is shown that although the steady-state performance is quite good when the interference sources differ widely in signal strength, the steady-state performance can be far below optimum when two or more interference sources are present at roughly equal power levels.     

Performance bounds for hot and cold clutter mitigation

A new method is presented for describing the theoretical interference space-time covariance matrix that will be observed in an adaptive airborne radar system under specific topographical conditions. Both hot clutter that is induced by interfering sources and cold clutter that results from the radar transmitter are considered. This method incorporates phenomenology observed under site specific conditions as well as system effects such as array geometry, receiver filtering, and system bandwidth. Use of this formulation rather than sample data analyses that are generally employed enables one to infer performance bounds for site-specific, and thus generally, heterogeneous terrain that are tighter and therefore more meaningful than the thermal noise floor limit     

The Performance of an LMS Adaptive Array with Frequency Hopped Signals

The performance of an LMS adaptive array with a frequency hopped, spread spectrum desired signal and a CW interference signal is examined. It is shown that frequency hopping has several effects on an adaptive array. It causes the array to modulate both the amplitude and the phase of the received signal. Also, it causes the array output SINR (signal-to-interference-plus-noise ratio) to vary with time and thus increases the bit error probability for the received signal. Typical curves of the desired signal modulation and the time-varying SINR at the array output are presented. It is shown how the array performance depends on hopping frequency, frequency jump size, interference frequency, signal arrival angles, and signal powers.     

Carrier-Tracking Loop Performance for Quaternary and Binary PSK Signals

By expressing the open-loop response voltage as a Fourier series in terms of the phase-tracking error and then utilizing a very useful mean-value expression, we assess the performance of loops suited to recovering the carrier of four-phase (quaternary) and two-phase (binary) phase-shift-keyed (QPSK and BPSK) signals. At high signal to noise ratios (SNRs) they perform comparably, but at low SNRs the former's performance deteriorates much more rapidly. The loop's ability to maintain the carrier frequency despite the noise accompanying the PSK signal is measured by the mean and the variance of the oscillator's control voltage. In particular, Spilker's loop for QPSK and the Costas loop for BPSK signals are discussed.