Prediction of the consequences of a high-velocity collision between meteoric particles and elements of a titanium alloy protective structure

Calculation-experimental studies of a high-velocity collision between VT1-0 titanium plates and ultrafine- and coarse-grained structures with a steel spherical impactor are illustrated. Fine-grained VT1-0 titanium plate samples have been obtained using the abc pressing method. Ballistic measurements have been performed using a 30-mm smooth-bore ballistic installation at velocities of about 2500 m/s. A high-velocity collision has been calculated in the scope of an elastoplastic model of interacting materials with regard to destruction and a different phase state at velocities reaching 15 km/s. It has been indicated that the mechanical properties of the VT1-0 alloy are improved when proceeding from a coarse-grained structure to an ultrafine- grained structure; however, in this case, the result of shock loading is hardly affected in the considered velocity range. Titanium plates can be used as screens to protect the main structure of the aircraft from a high-velocity collision.     

Maximum terminal velocity of relativistic rocket

The maximum terminal velocity problem of the classical propulsion is extended to a relativistic rocket assumed broken down into active mass, inert mass and gross payload. A fraction of the active mass is converted into energy shared between inert mass and active mass residual. Significant effects are considered. State and co-state equations are carried out to find the exhaust speed optimal profile.A first major result consists of a critical value of inert mass. Beyond it both true and effective jet speeds increase with time. Below it the true jet speed profile is reversed. At criticality, the best control consists of both velocities constant in time.A second meaningful result is represented by an interval of inert mass outside which no optimal control exists. Numerical results are discussed with particular emphasis to current concepts of antimatter propulsion.     

Evaluation of craters formation in hypervelocity impact of debris particles on solid structures

The aim of this work is to develop simplified model of space debris particle collision on solid structures, which would provide closed form solution formulas for determining crater depth, radius and ejected mass being functions of impactor mass, speed and material of both impactor and target. The model will be verified with results of experiments.     

Evaluation of craters formation in hypervelocity impact of debris particles on solid structures

The aim of this work is to develop simplified model of space debris particle collision on solid structures, which would provide closed form solution formulas for determining crater depth, radius and ejected mass being functions of impactor mass, speed and material of both impactor and target. The model will be verified with results of experiments.     

一种提升近地小行星防御中拦截效率的方法

利用核爆直接炸毁小行星或改变小行星的轨道以避免其与地球相撞,是近地小行星防御最主要的手段之一。文章基于美国爱荷华州立大学的超高速小行星拦截器(HAIV)概念,提出一种将原撞击引导器改为长杆撞击器的方案,采用自主研发的欧拉型冲击动力学仿真软件NTS模拟长杆撞击器对小行星连续开坑的过程,并在仿真中加入能量源以模拟核爆装置在不同深度爆炸对小行星产生的偏转与破坏效应。研究结果表明,采用长杆撞击器并合理控制撞击速度,能够引导核爆装置进入更深的地下爆炸,从而更加高效地耦合核爆能量,提升偏转小行星或直接摧毁小行星的能力。     

不同主流速度下障碍涡脱落冷流实验研究

采用冷流试验系统研究了不同主流速度对压强振荡的影响,并通过在流场中加入示踪粒子,且运用连续片光流动显示技术和高速数字摄像技术获得了试验器中流场的旋涡运动情况.实验结果表明,随着主流速度的增加,旋涡脱落的频率相应升高.同时,对比压强测试结果与高速摄影结果,发现当旋涡脱落的频率接近实验器声场的某一阶固有频率时,就可能引起压...     

基于输出反馈的编队卫星姿态同步和跟踪控制

研究了卫星编队无角速度测量信息且采用局部信息交互时的姿态协同控制问题.以四元数为姿态描述手段,采用超前滤波方法重构星体绝对和相对角速度信息,设计了基于输出反馈的分散姿态同步和跟踪控制器.利用Barbalat引理和代数图论等对闭环系统的全局渐近稳定性进行了理论分析和证明.以六星编队为背景的数值仿真进一步验证了算法的有效性.     

变深度水下发射系统内弹道实验研究

利用变深度水下发射模拟实验装置开展了变发射深度和发射速度条件下导弹发射系统内弹道研究。建立了描述缩比模型弹在发射筒内运动规律的简化模型,并提出了基于实验结果的运动方程求解方法。通过实验结果分析获得了模型弹的运动摩擦系数和发射速度,并利用高速摄影测量结果对获得的发射速度进行了验证。建立了运动摩擦系数和发射速度的数值拟合关系。结果表明,运动摩擦系数与发射速度呈反向变化规律,并且存在影响运动摩擦系数变化速率的临界发射速度,当发射速度小于临界值时运动摩擦系数变化剧烈,发射速度临界值为18～20 m/s。     

地月平动点尘埃动力学特性原位探测方法研究

为考察在地月平动点EML4、EML5可能存在的尘埃云的动力学特性,需研究能够覆盖较宽速度范围的尘埃颗粒动力学原位探测方法及技术。针对国内即将实施的Kordylewski尘埃云（KDC）探测任务,已有的栅网式尘埃速度矢量探测方法难以满足对高速颗粒的探测需求。作者提出通过在栅网式探测装置最后增加靶标以同时获得高速和低速颗粒的动力学特性参数,并对气凝胶靶标、电阻丝靶标、金属板靶标、电容式靶标、薄膜靶标及光帘式靶标等的适用性和优缺点进行分析比较后,建议采用栅网?金属电离复合式探测方法。     

Optimization of the Flight of a Spacecraft with a Solar Sail from the Earth to Mars with a Perturbation Maneuver near Venus

The trajectories of the fastest flight of a spacecraft (SC) with a solar sail from the Earth's sphere of activity to the Martian sphere of activity including the section of a perturbation maneuver near Venus are investigated. The planetary spheres of activity are assumed to be point-like; i.e., the maneuver section and the initial and final positions of the SC coincide with the corresponding positions of the planets. The initial velocity of the SC is assumed to be equal to the Earth's velocity, so that no leveling of the velocities of the SC and Mars in the final point of the flight is required. The perturbation maneuver is considered as a jump of the heliocentric velocity of the SC at the point of its contact with Venus, which does not change the magnitude of its Venus-centric velocity. The orbits of planets are assumed to be circular and coplanar; the SC trajectory lies at the plane of these orbits. The sail is planar with a specularly reflecting surface. The trajectories of optimum flights are determined as a result of solving the boundary value problem of the Pontryagin maximum principle. The families of solutions to this problem depending on the initial angular positions of Venus and Mars are constructed by the method of continuation over a parameter.     

Combustion characteristics of the end burning hybrid rockets in laminar flow

In this study, we aim to clarify the blowoff mechanism for flame spreading in an opposed laminar flow in narrow solid fuel ducts. To clarify this mechanism we conducted two experiments. First, we observed the changes of the flame spread rate at various oxygen velocities, ambient pressures, and port diameters. For flame spreading in laminar flow, combustion modes could be classified into 3 distinct regimes based on the strength of the opposed flow, i.e., chemical regime, thermal regime, and stabilized regime. This result is consistent with the result in turbulent flow. In the stabilized regime, quenching distance is almost constant despite oxygen velocity. In order to investigate the effect of ambient pressure and port diameter of fuels on blowoff limit, transition oxygen velocity is observed. As a result, transition oxygen velocity is proportional to the logarithm of the ambient pressure and port diameter. This relation is applicable despite the flow condition. Furthermore, we calculated velocity gradient at the fuel surface to reveal the determining factor of the blowoff limit in laminar flow. Consequently, velocity gradient, which is considered to dominate flow separation in laminar flow, would not be constant. This is because the velocity gradient at the fuel surface could not be evaluated by only the assumption of Hagen–Poiseuille flow but other parameters, such as vaporized fuel gas and natural convection by buoyancy should be included.     

用三轴转台辨识陀螺仪误差模型系数时的速率试验设计

介绍了用三轴转台的匀角速率功能标定捷联陀螺仪的动态误差模型系数的方法。首先计算了陀螺仪的输出，陀螺仪的误差模型系数以及三轴转台三轴同时施加的角速率的函数关系。其次在给定不同的中、内环角速率比时，用傅立叶分析的方法得出了陀螺仪输出的各次谐波幅值与动态误差模型系数的关系，以及相应的结构矩阵和信息矩阵。最后根据信息矩阵行列式值与外环角速率的关系，选定了标定陀螺仪动态误差模型系数时的最优三轴速率试验计划。     

A simplified approach to uncertainty quantification for orbits in impulsive deflection scenarios

For the majority of near-Earth Asteroid (NEA) impact scenarios, optimal deflection strategies use a massive impactor or a nuclear explosive, either of which produce an impulsive change to the orbit of the object. However, uncertainties regarding the object composition and the efficiency of the deflection event lead to a non-negligible uncertainty in the deflection delta-velocity. Propagating this uncertainty through the resulting orbit will create a positional uncertainty envelope at the original impact epoch. We calculate a simplified analytic evolution for impulsively deflected NEAs and perform a full propagation of uncertainties that is nonlinear in the deflection delta-velocity vector. This provides an understanding of both the optimal deflection velocities needed for a given scenario, as well as the resulting positional uncertainty and corresponding residual impact probability. Confidence of a successful deflection attempt as a function of launch opportunities is also discussed for a specific case.     

线性相对运动的正切拦截和正切交会轨道研究

针对冲量方向与追踪器速度方向相同的正切轨道问题,用线性相对运动方程研究了正切于初始轨道和正切于目标轨道的共面轨道拦截和轨道交会问题。得到初始和终端时刻的相对速度向量的解析表达式,定义了两个关于目标真近点角的单变量函数,于是正切拦截和正切交会问题等价于这两个函数分别等于零,最后用割线法求解这两个函数的数值解。根据能量最优要求,考虑初始漂移段,分析了一个周期内的最佳初始正切冲量点。仿真结果校验了本文提出的方法。     

第一和第二宇宙速度的诠释

讨论了第一和第二宇宙速度的含义,澄清了与这两个速度有关的一些模糊认识。     

燃气流速对EPDM绝热材料炭化层结构特征的影响

基于一种可变流速的烧蚀发动机,在含铝燃气环境中对三元乙丙绝热材料炭化层的结构特征开展了烧蚀试验研究,并对绝热材料表面炭化层进行了SEM分析及能谱分析.试验结果表明,绝热层表面燃气流速不同,所生成的炭化层表面、背面及侧面形貌及孔隙都有很大区别;燃气流速增大,炭化层厚度明显变薄,表面铝、硅氧化物沉积增加,同时炭化层材质疏松程度加大,结构强度减弱.     

空间超高速撞击碎片云前端速度的预测模型

文章利用一组二级轻气炮发射2017-T4 铝质球形弹丸撞击6061-T6单层铝板的地面试验数据,通过选择适当的函数模型,采用多元函数拟合的方法,得到了碎片云前端速度与靶板厚度、弹丸直径和弹丸速度关系的三元二阶多项式模型。再用另外一组数据对该模型进行检验,验证了其对碎片云前端速度具有较好的预测效果。将以上两组数据同样用于建立“无量纲化”模型进行碎片云前端速度预测,并与前述多项式模型的预测结果进行比较发现,该多项式模型预测的方均根误差及平均相对误差均明显优于“无量纲化”模型。该多项式模型可用于预测空间碎片撞击航天器产生的碎片云的前端速度,有助于航天器的空间碎片防护设计。     

Shock compression of liquid hydrogen in various experimental geometries

In connection with the use of cryogenic liquids in high-speed gas dynamics and high-pressure physics, shock-wave processes in liquid hydrogen were investigated under plane, cylindrical and hemispherical loading.The plane loading of liquid hydrogen consisted of a multicyclic, nearly isentropic compression. A transducer employing a contact electrical effect was used to record this multicyclic compression process between a rigid wall and a flyer, resulting in a sequence of shock steps of decreasing amplitude, whose integrated action is equivalent to the isentropic compression of liquid hydrogen up to 500 kbar.The cylindrical loading was generated by detonating a high-explosive charge enclosing a cylindrical cavity along its axis that was filled with liquid hydrogen. Under these conditions shock velocities up to 13.7 km/sec were recorded, and pressure in the shock-compressed hydrogen reached 90 kbar. The formation of a boundary layer and expansion of the cylindrical cavity limited further pressure increases in the column of compressed liquid and lead to a decrease in the flow velocity. The observed increase in detonation velocity is associated with the influence of the channel wave on the detonation regime in the neighboring explosive layers.Under hemispherical loading, an increase in the converging shock velocity from 6 to 20 km/sec was recorded. The final pressure reached 210 kbar, and the total specific energy exceeded 200 kJ/g. During the release of the shock-compressed hydrogen into air at 0.1 torr, shock waves with velocities exceeding 50 km/sec were obtained.     

点阵结构空气舵及内部流体热流固耦合研究

开展了钛合金TC4材料激光粉末床熔融(LPBF)工艺研究,在此基础上设计了多孔轻质空气舵模型,并基于有限差分法(FDM),采用三维流固耦合共轭传热数值计算方法,利用流体体积法(VOF)追踪流体自由液面,研究了典型的点阵夹层结构的空气舵内部冷却液动态换热过程的相互影响过程,考虑了冷却液与钛合金材料蒙皮间的耦合传热及湍流换热。结果表明,空气舵的内部流体压强随速度的增加而增加,从而导致流体出口的速度增加。当压强增加到一定程度时,流体的出口以水柱形式喷出。虽然较大的流体速度可以带走较多的热量,但是影响远小于对压强的影响。综合考虑空气舵的服役要求,获得了合适的冷却水入口速度。     

空间目标双基地ISAR一维距离像速度补偿方法

空间目标的高速运动会造成双基地ISAR一维距离像的畸变,针对此问题,研究了相应的速度估计与补偿方法。基于中频直接采样匹配滤波非相参双基地ISAR成像系统,首先研究了高速运动对双基地ISAR成像的影响,其次利用雷达基带回波具有的稀疏性,构造出与高速运动目标回波特性相匹配的冗余基并对其进行稀疏分解,然后据此估计出回波的调频斜率,进而估计出目标的无模糊速度,最后构造补偿相位项完成对宽带回波的速度补偿。算法补偿精度高,且无测速模糊,空间目标理想散点的仿真实验验证了补偿方法的有效性。