Energy Detection of a Random Process in Colored Gaussian Noise

A likelihood receiver for a Gaussian random signal process in colored Gaussian noise is realized with a quadratic form of a finite-duration sample of the input process. Such a receiver may be called a "filtered energy detector." The output statistic is compared with a threshold and if the threshold is exceeded, a signal is said to be present. False alarm and detection probabilities may be estimated if tabulated distributions can be fitted to the actual distributions of the test statistic which are unknown. Gamma distributions were fitted to the conditional probability densities of the output statistic by equating means and variances, formulas for which are derived assuming a large observation interval. A numerical example is given for the case in which the noise and signal processes have spectral densities of the same shape or are flat. The optimum filter turns out to be a band-limited noise whitener. The factors governing false alarm and detection probabilities are the filter bandwidth, the sample duration, and the signal level compared to the noise. Two sets of receiver operating characteristic curves are presented to complete the example.     

Fluctuating Target Detection in Clutter Using Sidelobe Blanking Logic

In an earlier paper, Maisel [6] considered two-channel detection systems using a sidelobe blanking logic when a nonfluctuating target was present. This paper is an extension of the earlier work to include fluctuating targets. The Swerling I, II, III, and IV models are considered when single-pulse detection is of interest. An adaptive threshold procedure is also briefly discussed whereby the probability of false alarm at any given resolution cell is maintained constant, even though the input clutter level may vary from cell to cell or from beam position to beam position. Useful data are presented for detection probabilities in the range 0.5 to 0.9, for false alarm probabilities in the range 104 to 10-8, and for a false detection probability of 0.1 for a sidelobe target yielding an apparent signal to total noise power density ratio of 13.0 dB in the main beam receiver.     

Coherent detection in Laplace noise

The discrete-time detection of a time-varying, additive signal in independent Laplace noise is considered. Previous efforts in this area have been restricted to the constant signal, and identically distributed noise case. Theoretical (closed form) expressions for the false alarm and detection probabilities are developed for both the Neyman-Pearson optimal detector and the classical matched filter detector. Comparisons between the two detectors are made which illustrate the effects of signal-to-noise power ratio and sample size for certain false alarm and detection probability constraints. In view of the fact that the optimal Laplace detector is not UMP, we also investigate the effect of signal amplitude mismatch     

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

A comparison of two adaptive detection schemes

Two schemes for adaptive detection are compared: Kelly's generalized likelihood ratio test (GLRT) and the mean level adaptive detector (MLAD). Detection performance, P_D, is predicted for the two schemes under the assumptions that the input noises are zero-mean complex Gaussian random variables that are temporally independent but spatially correlated; and the amplitude of the desired signal is Rayleigh distributed. P_D is computed as a function of the false alarm probability, the number of input channels, the number of independent samples per channel, and the matched filtered output signal-to-noise (S/N) power ratio. In this analysis the GLRT is shown to have better detection performance than the MLAD. The difference in detection performance increases as one uses fewer input samples. However, the required number of samples necessary to have only a 3 dB detection loss for both detection schemes is approximately the same. This is significant since for the present, the MLAD is considerably less complex to implement than the GLRT     

Clutter Map CFAR Analysis

An analysis of the probability of target detection for a clutter map CFAR using digital exponential filtering has been performed. General performance equations are derived. The probability of detection versus signal-to-noise ratio is plotted for a false alarm probability of 1.E-06 for several weight values. The CFAR loss is plotted for a detection probability of 0.9 and false alarm probabilities of 1.E-06 and 1.E-08.     

Detection Performance of a Mean-Level Threshold

The problem of detecting signals in nonstationary clutter is met by presenting a mean-level or adaptive threshold which adjusts to the changing background level. Such a threshold performs better than a fixed threshold that must be set for the highest amplitude clutter. However, the mean-level threshold does not perform as well for stationary noise as a fixed threshold set at the proper value. One measure of effectiveness of an adaptive threshold is its performance in stationary noise (compared to the optimum fixed threshold) for a specified speed of response. For the mean-level threshold, a simple mathematical solution is found for the detection probability when the noise is stationary and the signal scintillates rapidly. The performance is evaluated for a wide range of mean-level-threshold time constants and for several false-alarm probabilities. The results are presented graphically. As an example, the mean-level threshold suffers 3 dB in detectability (equivalent signal-to-noise ratio) in the presence of stationary noise as compared to the optimum fixed threshold for 50-percent probability of detection, false-alarm probability of 10-8, and an adjustment time of 15 times the signal duration.     

Sequential track extraction

Sensors like radar or sonar usually produce data on the basis of a single frame of observation: target detections. The detection performance is described by quantities like detection probability Pd and false alarm density f. A different task of detection is formation of tracks of targets unknown in number from data of multiple consecutive frames of observation. This leads to quantities which are of a higher level of abstraction: extracted tracks. This again is a detection process. Under benign conditions (high Pd, low f and well separated targets) conventional methods of track initiation are recommended to solve a simple task. However, under hard conditions the process of track extraction is known to be difficult. We here concentrate on the case of well separated targets and derive an optimal combinatorial method which can be used under hard operating conditions. The method relates to MHT (multiple hypothesis tracking), uses a sequential likelihood ratio test and derives benefit from processing signal strength information. The performance of the track extraction method is described by parameters such as detection probability and false detection rate on track level, while Pd and f are input parameters which relate to the signal-to-noise interference ratio (SNIR), the clutter density, and the threshold set for target detection. In particular the average test lengths are analyzed parametrically as they are relevant for a user to estimate the time delay for track formation under hard conditions     

基于均匀性判定规则的统计MIMO雷达多通道融合检测技术

针对统计MIMO雷达各观测通道统计特性不一致的情况,提出了一种多通道融合检测技术。该技术利用均匀性判定规则,选择一组均匀的、"被认为是具有较高信杂噪比"的局部检验统计量来构建全局检验统计量,即新的检测器。给出了新检测器的设计步骤和均匀性判定规则,并利用全概率公式证明了新检测器的虚警概率与每一操作步骤中过门限概率的关系,从而为仿真得出检测门限提供了理论基础。仿真结果表明,在不同通道间信噪比分布类型条件下,新检测器的检测性能具有较强的稳健性,且与不同条件下性能最优的检测器相比,其性能损失很小。     

Calculating Detection Probabilities for Adaptive Thresholds

In calculating detection probabiities for radar and sonar systems it is usually assumed that the threshold required to yield a certain probability of false alarm is known. This is often not the case for real systems and therefore the threshold must be estimated using some measure related to the test statistic. This paper presents a calculation technique that handles estimated (adaptive) thresholds in a general framework that can be applied easily to many detection problems. False alarm and detection probabilities are calculated from the characteristic function of the noise or signal plus noise variate and the characteristic function of the threshold estimate. To illustrate the method the detection performance of overlapped discrete Fourier transforms (DFTs) is calculated for a narrowband Gaussian target signal.     

Noncoherent Detection of Sinusoidal Signals in Sinusoidal Clutter

Probability density expressions associated with the noncoherent detection of a sinusoidal signal have been obtained. The signal is assumed to be imbedded in sinusoidal clutter at the same frequency and narrow-band Gaussian noise. The density expressions are shown to be a function of the signal-to-noise power ratio and the clutter-to-noise power ratio. The expressions have been numerically evaluated for a number of conditions, and the results under each reception hypothesis are presented graphically. Under large-sample conditions, the probability density for a multisample test statistic is shown to be Gaussian, and the probability of detection expression is written such that commonly available tabulated data can be utilized to determine the probabilities.     

Modified Generalized Sign Test Processor for 2-D Radar

The modified generalized sign test processor is a nonparametric, adaptive detector for 2-D search radars. The detector ranks a sample under test with its neighboring samples and integrates (on a pulse-to-pulse basis) the ranks with a two-pole filter. A target is declared when the integrated output exceeds two thresholds. The first threshold is fixed and yields a 10-6 probability of false alarm when the neighboring samples are independent and identically distributed. The second threshold is adaptive and maintains a low false-alarm rate when the integrated neighboring samples are correlated and when there are nonhomogeneities, such as extraneous targets, in the neighboring cells. Using Monte Carlo techniques, probability of false-alarm results, probability of detection curves, and angular accuracy curves have been generated for this detector. The detector was built and PPI photographs are used to indicate the detector's performance when the radar is operated over land clutter.     

Detectability of Spread-Spectrum Signals

Methods of detecting spread-sprectrum signals without knowledge of the pseudorandom code used to generate the signal are described. Exact and approximate methods of calculating relationships among detection probability, false alarm rate, and signal-to-noise ratio are given for radiometers and for channelized pulse-detection systems. The detection performance of the radiometer is compared graphically with that of pulse-detection systems, for two different kinds of pulse detection decision rules. Detection performance as a function of certain signal parameters is shown to be very different for a pulse-detection system than for a radiometer, and this difference in behavior provides a basis for selecting signal parameters that minimize the probability of detection. The reasoning that underlies the selection process is explained, and the process is outlined for each of several signal parameters.     

分布式接收宽带多目标信号盲检测迭代处理方法

随着软硬件技术的飞速发展和宽带接收机的广泛使用,频谱检测向着高瞬时带宽的方向发展,传统基于信道化处理的频谱检测方法存在搜索速度慢、处理效率低下的问题。文章提出了 1种新的分布式接收宽带多目标信号盲检测迭代处理方法,在无须预先知道信号数目及信号频谱位置的情况下,能够实现特定虚警概率多信号盲检测,具备较高的灵活性和稳健性。首先,在对信号特征进行分析的基础上,通过构造线性模型,将分布式接收多目标信号检测转化为线性模型求解问题进行处理;然后,基于贝叶斯多参数联合求解模型,在对未知参数先验分布进行合理假设的基础上,推导了各未知参数变分分布及信号检测门限的解析表达式,采用变分分布软信息迭代的方式实现多传感器信号、多参数联合估计,并利用每次迭代参数估计结果,对信号检测门限进行更新,通过置零操作实现预设虚警概率下的多信号盲检测;最后,通过仿真实验对所提方法性能进行了分析,并与相关方法进行了对比。仿真结果表明,所提方法能够有效利用多路接收信号信息,实现宽带未知多目标信号的盲检测,有效提升短数据下的算法处理效能,与现有方法相比,在接收单元数目较多以及信噪比较低时具有明显优势。     

Radar detection and preclassification based on multiple hypothesis

This work presents a single-scan-processing approach to the problem of detecting and preclassifying a radar target that may belong to different target classes. The proposed method is based on a hybrid of the maximum a posteriori (MAP) and Neyman-Pearson (NP) criteria and guarantees the desired constant false alarm rate (CFAR) behavior. The targets are modeled as subspace random signals having zero mean and given covariance matrix. Different target classes are discriminated based on their different signal subspaces, which are specified by their corresponding projection matrices. Performance is investigated by means of numerical analysis and Monte Carlo simulation in terms of probability of false alarm, detection and classification; the extra signal-to-noise power ratio (SNR) necessary to classify once target detection has occurred is also derived.     

Asymptotic Performance of Sparse Signal Detection Using Convex Programming Method

The detection of sparse signals against background noise is considered. Detecting signals of such kind is difficult since only a small portion of the signal carries information. Prior knowledge is usually assumed to ease detection. In this paper, we consider the general unknown and arbitrary sparse signal detection problem when no prior knowledge is available. Under a Neyman-Pearson hypothesis-testing framework, a new detection scheme is proposed by combining a generalized likelihood ratio test (GLRT)-like test statistic and convex programming methods which directly exploit sparsity in an underdetermined system of linear equations. We characterize large sample behavior of the proposed method by analyzing its asymptotic performance. Specifically, we give the condition for the Chernoff-consistent detection which shows that the proposed method is very sensitive to the 2 norm energy of the sparse signals. Both the false alarm rate and the miss rate tend to zero at vanishing signal-to-noise ratio (SNR), as long as the signal energy grows at least logarithmically with the problem dimension. Next we give a large deviation analysis to characterize the error exponent for the Neyman-Pearson detection. We derive the oracle error exponent assuming signal knowledge. Then we explicitly derive the error exponent of the proposed scheme and compare it with the oracle exponent. We complement our study with numerical experiments, showing that the proposed method performs in the vicinity of the likelihood ratio test (LRT) method in the finite sample scenario and the error probability degrades exponentially with the number of observations.     

Estimation of radar detection and false alarm probability

The accuracy with which detection and false alarm probabilities can be estimated with a limited amount of measured radar data is addressed. A simple simulation method for estimating the statistical performance of a radar detection system is presented. Confidence limits and a rule of thumb for accuracy for the estimated probabilities are presented along with procedures for calculating them. It is concluded that the minimum value of N used in a detection radar signal simulation should be 10/P_FA when the simple simulation method is used, where P_FA is the probability of false alarm, and that a value closer to 100/P _FA is preferable     

Sonar Array Detection of Gaussian Signals in Gaussian Noise of Unknown Power

A statistical test is postulated for detecting, with an M-element hydrophone array, a Gaussian signal in spatially independent Gaussian noise of unknown power. The test is an extension of the uniformly-most-powerful (UMP) unbiased test for a two-element array. The output signal-to-noise ratio of the test is calculated and, for a large number of independent space-time samples, is shown to be no better than a mean-level detector (MLD). Receiver operating characteristic curves (ROC) for the MLD are computed and compared to the ROC curves for the optimum (Bayes) parametric detector. The input signal-to-noise power ratios required to provide a detection probability of 0.5 differ by less than 0.2 dB for a fifty-element array with wide variation in false-alarm probability and time-bandwidth product. This result suggests that both the extended bivariate UMP unbiased test and the MLD perform close to the unknown UMP unbiased test for independence of a multivariate Gaussian distribution.     

A mean level adaptive detector using nonconcurrent data

Convergence results for a mean level adaptive detector (MLAD) are presented. The MLAD consists of an adaptive matched filter (for spatially correlated inputs) followed by a mean level detector (MLD). The optimal weights of the adaptive matched filter are estimated from one batch of data and applied to a statistically independent batch of nonconcurrent data. The threshold of the MLD is determined from the resultant data. Thereafter a candidate cell is compared against this threshold. Probabilities of false alarm and detection are derived as a function of the threshold factor, the order of the matched filter, the number of independent samples per channel used to calculate the adaptive matched filter weights, the number of samples used to set the MLD threshold, and the output signal-to-noise power ratio of the optimal matched filter. A number of performance curves are shown and discussed