共查询到20条相似文献,搜索用时 843 毫秒
1.
2.
《航空精密制造技术》2023,(5):71-72
<正>第六届中国天津国际直升机博览会开幕9月14日,第六届中国天津国际直升机博览会(以下简称“直博会”)在天津空港经济区隆重开幕。本届直博会,航空工业作为主办方之一,以“科技创新推动直升机产业高质量发展”为主题,立足产业融合推动直升机全体系化发展、勇担使命助力国家应急救援体系建设、科技创新驱动直升机技术发展三方面内容,通过馆内静展、室外静展、飞行表演等多种方式,全景式呈现我国直升机产业的体系化发展成果。本届直博会,航空工业集中展出各类航空装备及技术项目展品共20型、60项,其中,直11E、AR500C、AR300全电多旋翼飞行器、M20氢能源垂直起降飞行器等19项展品为首次参展,占比29.6%。 相似文献
3.
2011年是中国通用航空60周年,也是通航产业发展的一个新纪元,国内外的许多业内人士一致看好中国通用航空未来的发展前景.通过对比国内外通航飞机的保有量也能发现,国内的通航市场有非常大的上升空间.这其中,民用直升机占有相当部分的市场比重.直升机可以垂直起降、空中悬停的技术特点,使得它在中低空和特殊地区飞行时具备固定翼飞机... 相似文献
4.
5.
本文从直升机临时起降点的特点和我国海陆兼备的地理特征情况出发,根据港口、海岛城市所处的区位优势和拥有的资源特点,以舟山群岛地区建设直升机起降点为例,论述了以城市附近的永备机场为基地机场,规划临时起降点的基本特点。从发展海洋经济、发展旅游业、发展立体交通、实现海上救援四个方面,论述了利用直升机临时起降点发展通用航空事业在沿海地区区域经济发展中的意义和前景。 相似文献
6.
垂直起降无人机总体方案分析及控制策略综合研究 总被引:4,自引:0,他引:4
垂直起降无人机是垂直起降技术和无人机的结合体。它既有直升机的垂直起降和悬停能力,又具有固定翼飞机的速度快、航程远的特点。同时,它还具备一般无人机的基本特点,可满足执行特殊任务的需要。因无需考虑机载人员的因素,垂直起降无人机可以采用的垂直起降和总体设计方案更加灵活和多样。本文在分析现有各种垂直起降无人机方案的基础上,提出了“双旋翼尾坐式飞翼”布局,并在随后对其进行了详细参数确定和性能估算。最后,对其进行了控制策略的研究。 相似文献
7.
垂直起降无人机总体方案分析 总被引:2,自引:0,他引:2
垂直起降无人机是垂直起降技术和无人机的结合体。它既有直升机的垂直起降和悬停能力,又具有固定翼飞机的速度快、航程远的特点。还具备一般无人机的基本特点,可满足执行特殊任务的需要。因无需考虑机载人员的因素,垂直起降无人机的总体设计方案更加灵活和多样。在分析现有各种垂直起降无人机方案的基础上,提出了“双旋翼尾座式飞翼”布局,并对其飞行控制策略进行了研究。 相似文献
8.
直升机舰上起降是 1个舰、机、人、环等多因素耦合的复杂系统问题。重点分析影响直升机高海况舰上起降能力的舰、机相关装备因素,主要包括舰船的摇荡运动特性、起降平台及上层建筑主尺度,快速系留与牵引、摇荡运动预报等直升机舰面保障设备能力,直升机的抗合成甲板风、适应舰船摇荡运动、舰面开/关车等能力,以及风况监测能力等,给出装备因素影响直升机高海况起降的原理、规律、特点,总结部分国外海军相关研究和装备情况,为国内相关研究和装备研制提供借鉴和参考。 相似文献
9.
舰载直升机着舰动力学分析 总被引:4,自引:1,他引:4
直升机的舰上起降是研究机一舰动态配合的主要内容,它是直升机起降安全和充分发挥其潜力的有力保证。为此从直升机舰上起降的特点出发,分析了舰船运动特性,空气尾流场变化规律,对直升机着舰及其着舰后的甲板运动力学进行了研究,最后简要地介绍了“风限图”的情况。 相似文献
10.
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
Integrated Entry Guidance for Reusable Launch Vehicle 总被引:2,自引:2,他引:0
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
15.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
16.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
17.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
18.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
19.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献