Signal-to-Noise Ratio of Arbitrary Power-Series Nonlinear Amplifier

A general analysis of the effect of an arbitrary power-series nonlinear amplifier followed by a coherent mixing device on signal-to-noise ratio (SNR) is performed. An expression is derived for the improvement factor which is defined as the logarithm of the ratio of the output SNR to the input SNR. This expression is applicable to the coherent amplitude detector and phase locked loop as well as noncoherent amplifier by appropriate selections of the detection angle. Moreover, the improvement factor can be obtained for noise with an arbitrary amplitude distribution. To demonstrate the applicability of this analysis, the improvement factors of the nonlinear amplifiers such as a power-law amplifier and a power-series amplifier with positive and negative discriminations are numerically calculated for the cases where the input noise amplitude distributions are Rician and triangular.     

Performance Degradation of MTI Circuits Due to Amplitude Limiting

The loss in output signal-to-noise ratio (SNR) due to amplitude limiting is obtained for a radar circuit consisting of a bandpass limiter, coherent demodulator, matched filter, and moving-target-indicator (MTI) filter. The circuit is used in scanning MTI radars. The tandem connection of the limiter and coherent demodulator is a model for the saturation of the intermediate-frequency (IF) demodulator of an MTI radar. Results on special functions are used to obtain simple formulas for the loss in output SNR relative to a linear IF demodulator when the input SNR is less than -15 dB and the number of hits per 3-dB beamwidth exceeds 15.     

Proportional Tracking with Clipped-input Matched Filters

A proportional boresight-error measurement is described for tracking systems that is applicable to envelope-producing matched filters with hard-limited inputs. The error response is derived as a function of input SNR and the filter output SNR is estimated.     

Output Signal-to-Noise Ratio for Amplitude and Intensity Modulated Laser

General expressions are obtained for output SNR for both amplitude- and intensity-modulated lasers, where bandlimited Gaussian noise has been chosen as a modulating signal, and in the presence of background light. Two types of modulating signals are considered: the baseband and bandpass modulating signals. Detailed calculations are made for output SNR when an ideal narrowband optical filter is used. The dependence of output SNR on several parameters, such as the center frequency of the modulating signal, the effective average quantum rate, and input SNR, are discussed. In addition, the difference in performance between amplitude and intensity modulation is discussed. The detection characteristics of the homodyne system are also considered.     

Transmission Characteristics of an FM Signal Through a Hard Limiting Repeater

The response of an FM detector to an FM signal which is passed through a hard limiting repeater together with additive Gaussian noise is described. A general expression of the output SNR is derived that enables the determination of the threshold behavior. To clarify the feature of a transmission characteristic, a comparison with a linear repeater is also made. The output SNR is found to be larger than that of the linear system for all practical values of input CNR's.     

Fourier Analysis of Commutated-Capacitor-Type Integrator Output Signal

It is shown that an operational amplifier with four commutated capacitors in the feedback path produces an output signal whose fundamental is equal in magnitude but 180 degrees out of phase with the input. The analysis is carried out by expressing the output signal in a Fourier series.     

高稳定接触电阻监测电路的分析与研究

本文对一种稳定性较高的接触电阻监测电路的组成、工作过程及各元件的作甩作了详细说明。提出用高精度低漂移集成运算放大器OP-07组成同相放大器,作为监测电路的缓冲放大器;计算了相对误差和输入、输出电阻值。还对Kelvin连接的原理作定性分析。从实验验证运算放大器的偏置电流和失调电流在输入端外接电阻上所产生的电压,是影响测量稳定性的主要因素。适当减小输入端外接电阻可有效抑制输出信号的漂移。     

基于独立成分分析的混合LFM信号检测

混合LFM信号广泛存在于实际信号环境巾,对其检测极其重要。对有严重交叉项的混合LFM信号的检测十分困难,因此提出了一种基于独立成分分析的混合LFM信号检测法。通过盲源分离提取各独立成分,利用时频分布矩阵的联合对角化法抑制交叉项,再由各成分信号自项求和重构Wigner-Ville分布,采用Wigner-Hough检测各LFM成分。分析了Wigner-Hough变换输入信噪比和输出信噪比的关系,仿真验证了算法的有效性,得出随着样本点数的增加,在低信噪比条件下,能获得好的检测性能的结论：     

Signal Resolution via Digital Inverse Filtering

Research in numerous areas is directed toward the resolution of multiple overlapping signals in a noisy environment. These areas include radar, sonar, speech, seismology, and electrophysiology. Sometimes matched filters are used; other times inverse filters are employed. This paper discusses one approach to the analysis of the resolution of inverse filters. Our method is to compromise the trade-off between signal resolution and the output signal-to-noise ratio (SNR). A performance measure for the inverse or deconvolution filter is defined as a quantity proportional to the harmonic mean of the resolution and the SNR. An optimum output pulse duration is obtained using this criterion, where the pulse shape has been previously selected and the input signal waveform is known. In addition, upper and lower bounds for the output pulse duration are presented. Graphs are given which allow the designer to select the optimum inverse filter output pulse duration for a desired signal resolution and an estimated SNR.     

A UHF True Logarithmic IF Amplifier

A UHF ?true logarithmic IF? which yields a carrier output proportional in amplitude to the logarithm of the carrier input has been constructed. Although this ?true? form has been known for a number of years, it appears to have been neglected in development. Good performance has been obtained over a 60-dB input signal range with rise and fall times of 2 ns per 20 dB. A high-level, detected dc coupled output without the use of any dc amplifier is obtained. Coherent signal processing of the output carrier is possible, and other important advantages to this type of logarithmic IF are described.     

Output Signal-to-Noise Ratios for Amplitude-Modulated Noise-Like Lasers

A general expression of the output SNR of a photodetector is derived for a noise-like laser amplitude-modulated by a stationary Gaussian random modulating signal in the presence of a background light. The electric field Vx(t) of the noise-like laser is assumed to be a stationary narrowband Gaussian random process with zero mean. Two types of modulating signal are considered, the baseband and bandpass modulating signals. More specifically, the effects of the center frequency of the modulating signal, the modulating degree, the bandwidth ration of the noise-like laser to the modulating signal, the effective average quantum rate, and input CNR on output SNR are studied. The detection characteristics of the noise-like laser are also made clear by comparison with the case of a coherent laser.     

带输入饱和的直升机信息融合解耦控制算法

针对带输入饱和的直升机解耦控制问题,提出了一种改进的信息融合解耦控制算法,通过融合主通道和相应耦合通道期望输出和控制能量的软约束信息,以及系统状态方程和输出方程的硬约束信息,获得二次型性能指标下解耦控制律的最优估计,使直升机的内回路控制具有良好的动态特性和解耦性能。通过控制能量软约束信息的自适应调节,使求取的控制量满足输入饱和限制要求,避免了因输入饱和导致的解耦性能变差和驱动器过载问题。提出的信息融合控制算法基于被控对象的离散模型实现,容易应用于工程实际中。仿真结果表明了该算法的有效性。     

Detection of Known Signals in Nonstationary Noise

The basic design of a nonlinear, time-invariant filter is postulated for detecting signal pulses of known shape imbedded in nonstationary noise. The noise is a sample function of a Gaussian random process whose statistics are approximately constant during the length of a signal pulse. The parameters of the filter are optimized to maximize the output signal-to-noise ratio (SNR). The resulting nonlinear filter has the interesting property of approximating the performance of an adaptive filter in that it weights each frequency band of each input pulse by a factor that depends on the instantaneous noise power spectrum present at that time. The SNR at the output of the nonlinear filter is compared to that at the output of a matched filter. The relative performance of the nonlinear system is good when the signal pulses have large time-bandwidth products and the instantaneous noise power spectrum is colored in the signal pass band.     

Postfiltering in Digital Beamformers

Assuming a sinusoidal signal superimposed on a narrow-band Gaussian noise as the input to a receiving array, the output power and signal-to-noise ratio of a digital beamformer with postfiltering were formulated so that subsequent calculations could be made without an analysis in the frequency domain. The formulation utilized the quantizer functions previously given by the author and certain spectral power distribution factors originally attributed to Davenport but more rigorously derived and discussed in the present work. A numerical study based on this formulation for a DIMUS array in a correlated noise field reveals that except for certain rare circumstances, postfiltering generally improves the output SNR or array gain. It is demonstrated that the amount of postfiltering gain not only varies with array input SNR but also depends strongly upon the spacing-to-wavelength ratio, and its meaningful interpretation can only be made in conjunction with both the clipping and noise correlation losses. In particular, balancing postfiltering gain against the two losses suggests that receiving arrays with element spacings smaller than one-half of the operating wavelength may be used to the advantage of system design under certain conditions.     

Effect of Sampling Time Jitter on Array Performance

The effect on array SNR of errors in sampling times (jitter) isan analyzed for the "Bryn processor." Jitter is modeled as a discrete-paramter er random process, and expressions for array SNR are determined as a function of signal and noise spectra and jitter characteristics. For a plane wave signal, it is found that jitter in the data used to design the processor has no effect on output SNR if the noise is independent between channels. However, jitter in the input (evaluation) n) data can cause a substantial loss in peak array SNR and in the array's frequency selectivity. These losses can be expected to increase as the high-frequency content of the data increases. The Bryn processor also loses its interpretation as a likelihood ratio processor in the presence of jitter. The effect of jitter can be reduced in many cases by increasing the sampling rate.     

Theory of LDV Tracking Systems

The application of frequency-tracking systems to the analysis of laser doppler velocimeter (LDV) signals degraded by background noise has been studied both theoretically and experimentally. Expressions are derived for both the correlation function and the expected value of the phase derivative in the general case of noise off center from the Doppler frequency, and these results are specialized to specific cases of practical interest. Laboratory measurements of output signal-to-noise ratio (SNR) and dc error, for varying input SNR and noise center frequency offset, show good agreement with the theoretical predictions.     

基于自适应分段混合系统的轴承故障诊断

针对强噪声背景下轴承早期故障的诊断问题,提出一种基于自适应分段混合随机共振（adaptive piecewise hybrid stochastic resonance,APHSR）系统的检测方法。采用经验模态分解法（EMD）进行信号预处理,分别采用能量密度法和相关系数法去除高、低频噪声,自动筛选最优固有模态函数,经尺度变换后输入分段混合随机共振系统模型,提取故障信号。工程实验显示:经过APHSR系统,轴承故障特征频率的频谱幅值、频谱幅值与周围最大噪声之差和最大信噪比（SNR）均高于经验模态分解和经典随机共振方法,其中齿轮箱故障轴承信噪比分别提高了9.579 dB和7.473 dB,转子故障轴承信噪比分别提升了8.597 dB和5.695 dB,对凯斯西储大学故障轴承数据处理后的信噪比分别提升了3.369 dB和17.043 dB。数据表明APHSR方法具有高效性,提高了轴承故障信号诊断能力。      

Multiplier Offset Voltages in Adaptive Arrays

The effects of multiplier offset voltages in adaptive arrays are examined. Multiplier offset voltages arise when active circuits are used to implement the error-by-signal multipliers required in an array based on the LMS algorithm. These offset voltages are known from experimental work to have a strong effect on array performance. It is first shown how multiplier offset voltages may be included in the differential equations for the array weights. Then their effect on weight behavior is studied. It is found that the offset voltages affect the final values of the weights, but not the time constants. Furthermore, the effect they have is influenced by the amount of element noise in the array. An adequate amount of noise is necessary to minimize weight errors due to offset voltages. An example is treated to show the effect of offset voltages on the final array weights and the output signal-to-noise ratio (SNR). With offset voltages present, it is found that there is a maximum SNR that can be obtained from the array. A specific input SNR is required to obtain this maximum output SNR. Finally, it is shown that a finite operating range for the weights places a further restriction on the acceptable values of offset voltages and noise.     

Properties of Low Precision Analog-to-Digital Converters

The problem of quantization and saturation noise introduced by the process of analog-to-digital conversion is addressed. Analog-to-digital converters (ADC) with even versus odd numbers of output states are compared. Expressions are derived and evaluated which yield the signal-to-noise ratio and the gain versus signal level input when the input signal has an assumed Gaussian probability density. The results presented should have application in all fields in which digital signal processing is performed.     

Data-driven model-free adaptive attitude control of partially constrained combined spacecraft with external disturbances and input saturation

This study presents an improved data-driven Model-Free Adaptive Control(MFAC)strategy for attitude stabilization of a partially constrained combined spacecraft with external disturbances and input saturation. First, a novel dynamic linearization data model for the partially constrained combined spacecraft with external disturbances is established. The generalized disturbances composed of external disturbances and dynamic linearization errors are then reconstructed by a Discrete Extended State Observer(DESO). With the dynamic linearization data model and reconstructed information, a DESO-MFAC strategy for the combined spacecraft is proposed based only on input and output data. Next, the input saturation is overcome by introducing an antiwindup compensator. Finally, numerical simulations are carried out to demonstrate the effectiveness and feasibility of the proposed controller when the dynamic properties of the partially constrained combined spacecraft are completely unknown.