Dynamic Targets in CRRs Part II: Experiments and SAR Correspondence

Expressions describing the correspondence between moving-target artifacts for synthetic-aperture radar (SAR) and compact radar range (CRR) emulations are developed. Experimental results are then presented to verify the accuracy of these equations and to characterize the capacity of CRRs to emulate translating, vibrating, and rotating targets. We show that phase-compensation techniques can be applied to CRR data, providing a suitable test bed for SAR phase-compensation techniques.     

Doppler aliasing reduction in SAR imagery using stepped-frequency waveforms

A new technique for eliminating Doppler aliasing artifacts in synthetic aperture radar (SAR) imagery is presented. The technique uses continuous transmission of stepped-frequency (SF) waveforms to generate a simple, but effective, approximation of a two-dimensional |sinc|² ambiguity function. This approach ensures aliasing artifacts are placed at nulls in a Doppler filter, effectively removing them from the imagery. Various methods of generating SF waveforms are introduced and their performance is quantified. Finally, simulated SAR imagery shows elimination of more than 99% of the aliased energy     

VSAR: a high resolution radar system for ocean imaging

The velocity synthetic aperture radar (VSAR) is a conceptual synthetic aperture radar (SAR)-based sensor system for high resolution ocean imaging. The VSAR utilizes data collected by a multielement SAR system, to extract information not only about the radar reflectivity of the observed area, but also about the radial velocity of the scatterers in each pixel. This is accomplished by making use of the phase information contained in multiple SAR images, and not just the magnitude information as in conventional SAR. Using this velocity information, the VSAR attempts to compensate for the velocity distortion inherent in conventional SAR and to reconstruct the ocean reflectivity. We present the basic theory of the VSAR system and its performance. We also provide an analysis of the VSAR imaging mechanism for a statistical model of the radar returns, designed to capture the effects of speckle and of resolution degradation due to the decorrelation of the radar returns     

一种改进的FMCW SAR RD成像算法

FMCWSAR将调频连续波与合成孔径成像技术结合于一体,是一种新近被提出来的成像雷达体制,它以其体积小、重量轻、成本低、分辨率高等一系列优点,引起越来越多的关注。然而,在FMCWSAR系统中,雷达连续不断地发射信号,调制信号周期相对较长,停一走（STOP AND GO）近似不再成立,所以要用合适的算法来实现成像。针对FMCW SAR的特点,详细推导了停一走近似失效时FMCW SAR的信号模型及处理过程,提出了一种改进的RD算法。此方法是通过补偿连续运动引入的多普勒频移,消除连续运动的影响。     

一种提高距离分辨率的FMCW SAR RD成像算法

调频连续波合成孔径雷达（FMCW SAR）是一种新近提出来的成像雷达体制,它结合调频连续波与合成孔径成像技术,具有体积小、重量轻、成本低、分辨率高等一系列优点。从频谱的角度进行分析,FMCW SAR的距离分辨率取决于频率测量分辨率。文章研究了一种FMCW SAR高距离分辨率成像算法——利用FFT得到差频信号谱峰的粗略范围,再对这一范围进行ChirpZ变换,从而实现距离高精度估计,并且避免了大的计算量。仿真结果表明该方法的有效性。     

弹载合成孔径雷达自适应重频分析与设计

弹载合成孔径雷达(Synthetic Aperture Radar,SAR)的目标距离、视线角由于高速逼近目标而快速变化,这导致传统的固定脉冲重复频率(Pulse Repetition Frequency,PRF)(简称重频)波形难以兼顾弹载SAR雷达在成像各方面的约束条件,故需要根据当前弹体运动和弹目关系变化情况实时计算重频。详细分析了影响重频选择的各项因素,包括避免距离模糊、方位模糊、高度杂波、发射遮挡影响及SAR成像分辨率、系统相参性要求等影响因素,并设计了自适应重频计算的工作流程。某SAR雷达系统实验表明,该设计能够在实际飞行弹道条件下根据实际弹目关系自适应调整脉冲重复频率,从而更好地实现SAR雷达系统的工作性能,有效解决了固定重频波形不能适应弹载SAR工作条件的难题。     

一种孔径和频率二维稀疏的步进频SAR成像方法

 步进频率信号(SFWs)在不增加雷达系统瞬时带宽的情况下能够获得高的距离向分辨率的同时,也存在着抗干扰能力较差及其等效重复频率较低的问题,并且在方位向积累时间内由于雷达载机工作状态的变化,会导致方位向的数据录取不完整。针对上述问题,提出一种孔径和频率二维稀疏的步进频合成孔径雷达(SAR)成像方法。首先,分析了稀疏步进频率信号(SSFWs)的SAR成像模型,然后基于压缩感知理论完成距离向成像处理。其次,针对稀疏孔径的回波数据,通过构造成像算子和压缩感知重建模型的方法实现其距离徙动校正和方位压缩处理,进而获得二维成像结果。相比于传统的步进频率信号SAR成像,利用所提方法能够在少量的频率资源和雷达回波数据情况下实现准确的SAR成像。最后,通过对仿真和实测的步进频率雷达数据进行成像处理,验证了所提方法的有效性和可行性。     

Integrated precision SAR targeting: a SAR targeting simulation

Operational deficiencies exist in the current ability to perform high resolution synthetic aperture radar (SAR) targeting for precision strike missions in difficult electronic countermeasure (ECM) and anti-aircraft environments. Increasingly sophisticated enemy defenses require that fire control information be derived from highly maneuverable aircraft trajectories rather than traditional straight-and-level flight. In addition, target area aspect information is needed to determine optimal attack approaches. These imaging and targeting conditions impose severe performance requirements on the sensor aircraft motion compensation system (MCS), and dictate the need for sophisticated algorithms to counteract ECM threats. This paper describes the development of a user friendly “Design Tool” for modeling and analysis of airborne radar system performance for SAR imaging and Precision SAR Targeting     

DSP及PC机间的数据通信技术研究

合成孔径雷达(SAR)是全天候全天时的主动微波成像雷达,因此在军事和民用方面得到了广泛的应用。合成孔径雷达成像的显著特点是数据吞吐量大,实时性强,然而单片的高性能DSP无法满足SAR成像的需求,故采用多片DSP技术。在多片DSP并行处理技术中,它们之间如何进行通信是一个关键技术。本文以ADSP2106x为例,研究了DSP间的通信以及DSP与PC机间的通信。串行通信、DMA通信和VC++的MSComm控件通信都是很好的通信方式,但DMA更适合大量的数据通信。     

Conceptual design of near-space synthetic aperture radar for high-resolution and wide-swath imaging

Airborne synthetic aperture radar (SAR) has the capability of high-resolution, and spaceborne SAR has the capability of wide-swath. Inspired by recent advances in near-space defined as the region between 20 km and 100 km, this paper conceptually designed near-space vehicle-borne SAR. The near-space vehicle-borne SAR has the synthetical advantages of the satellite and airplane platforms. By placing SAR transmitter or receiver in near-space vehicles, many functions that are currently performed with satellites or airplanes could be performed in low cost way. These advantages make simultaneous high-resolution and wide-swath SAR imaging possible. As such, this paper focuses on the role of near-space vehicle for high-resolution and wide-swath SAR imaging, and deals with conceptual performance, as opposed to technological implementation. The concepts, models and processing algorithms are provided. To further suppress the azimuth ambiguities and extend swath width, multiple beams in azimuth is applied. Furthermore, an example near-space vehicle-borne SAR is designed. It is shown that the use of cost effective near-space vehicles can provide the solutions that were previously thought to be out of reach for remote sensing scientists and customers.     

适用于非合作发射源的合成孔径雷达无源成像方法

 合成孔径雷达(SAR)具有突出的高分辨率成像能力,在民用和军用领域体现出重要的应用价值。在复杂的作战环境中,提高SAR的电子对抗性能成为SAR技术发展考虑的重要方面。提出一种新的SAR无源成像方法,该成像方法将单部机载SAR接收机或多部机载SAR接收机在不同位置处接收到的回波信号相关,对相关后的信号采用滤波反投影方法进行成像,可重建场景的辐射率。该成像方法不需要已知发射源的波形和位置信息,适用于非合作发射源,具有良好的电子对抗性,并且适用于任意载机飞行轨迹、多基SAR等情形。仿真验证以双基情形为例,验证了该SAR无源成像方法的有效性,并分析了影响成像质量的各关键因素。     

SAR image formation via semiparametric spectral estimation

A new algorithm, referred to as the SPAR (Semiparametric) algorithm, is presented herein for target feature extraction and complex image formation via synthetic aperture radar (SAR). The algorithm is based on a flexible data model that models each target scatterer as a two-dimensional (2-D) complex sinusoid with arbitrary unknown amplitude and constant phase in cross-range and with constant amplitude and phase in range. By attempting to deal with one corner reflector, such as one dihedral or trihedral, at a time, the algorithm can be used to effectively mitigate the artifacts in the SAR images due to the flexible data model. Another advantage of SPAR is that it can be used to obtain initial conditions needed by other parametric target feature extraction methods to reduce the total amount of computations needed. Both numerical and experimental examples are provided to demonstrate the performance of the proposed algorithm     

A Model for Generating Synthetic VHF SAR Forest Clutter Images

We propose a model for generating low-frequency synthetic aperture radar (SAR) clutter that relates model parameters to physical characteristics of the scene. The model includes both distributed scattering and large-amplitude discrete clutter responses. The model also incorporates the SAR imaging process, which introduces correlation among image pixels. The model may be used to generate synthetic clutter for a range of environmental operating conditions for use in target detection performance evaluation of the radar and automatic target detection/recognition algorithms. We derive a statistical representation of the proposed clutter model's pixel amplitudes and compare with measured data from the CARABAS-II SAR. Simulated clutter images capture the structure and amplitude responses seen in the measured data. A statistical analysis shows an order of magnitude improvement in model fit error compared with standard maximum-likelihood (ML) density fitting methods.     

机动目标的逆合成孔径雷达成像

 逆合成孔径雷达(ISAR)和合成孔径雷达 (SAR)都是利用目标 (场景)与雷达的相对运动,提高横向分辨率,实现对目标 (场景 )的成像。SAR的运动方是雷达平台,可控制作平稳飞行,且用仪器测校其偏离误差;ISAR的运动方通常是非合作目标,运动不受控制,且难以精确测量。当目标作机动飞行时,以目标作固定基准,雷达等效地在空间形成流形复杂的逆合成孔径 (阵列 ),对这种情况下成像的问题进行了系统的研究。     

RFI suppression for ultra wideband radar

An estimate-and-subtract algorithm is presented for the real-time digital suppression of radio frequency interference (RFI) in ultrawideband (UWB) synthetic aperture radar (SAR) systems used for foliage- and ground-penetrating imaging. The algorithm separately processes fixed- and variable-frequency interferers. Excision of estimated targets greatly reduces bias in RFI estimates, thereby reducing target energy loss and sidelobe levels in SAR imagery. Performance is demonstrated on data collected with the Army Research Laboratory's UWB rail SAR.     

Multifrequency Imaging of Radar Turntable Data

In recent years synthetic-aperture radars (SAR) have proven to be very useful two-dimensional imaging tools in various fields. Based on the synthetic-aperture concepts, different imaging modes are possibe with various operating characteristics. We describe a special case where circular-projection radar data are coherently processed to yield both azimuth and range resoultion. Experiments are performed using data obtained from the radar target scatter site (RAT SCAT) radar cross-section facility. Fairly good results are obtained which illustrate the versatility of coherent syntheticaperture processing of pulse-to-pulse high-range-resolution radar returns. A discrete multifrequency stepped and pulsed waveform is the basic transmitted signal from which range-Doppler images are generated. The RAT SCAT turntable facility allows interesting model targets to be illuminated from which radar images can then be computed. One such application of the processing is described.     

Patch diameter limitation due to high chirp rates in focused SARimages

Polar-format processed synthetic aperture radar (SAR) images have a limited focused patch diameter that results from unmitigated phase errors. Very high chirp rates, encountered with fine-resolution short-pulse radars, exasperate the problem via a residual video phase error term. This letter modifies the traditional maximum patch diameter expression to include effects of very high chirp rates     

基于CZT的机载并行双站斜视SAR成像算法

建立了机载并行双站斜视合成孔径雷达(SAR)的几何模型,给出了雷达回波的数学表达式,推导了它的二维频谱并对其特点做了分析。在二维频域内,先用聚焦函数对观测场景中心的点目标做精确成像,然后用Chirp-Z变换(CZT)校正中心点两侧目标回波的距离徙动,再通过方位向逆傅里叶变换得到了雷达图像。该算法利用了CZT能够处理非线性调频信号的特点,简化了处理过程,提高了计算效率和成像精度。仿真实验验证了这种基于CZT的新算法在处理并行双站斜视SAR数据时的有效性。     

High-resolution SAR imaging with angular diversity

We propose to use the APES (amplitude and phase estimation) approach for the spectral estimation of gapped data and synthetic aperture radar (SAR) imaging with angular diversity. A relaxation-based algorithm, referred to as GAPES (Gapped-data APES), is proposed, which includes estimating the spectrum via APES and filling in the gaps via a least squares (LS) fitting. For SAR imaging with angular diversity data fusion, we perform one-dimensional (1-D) windowed fast Fourier transforms (FFTs) in range, use the GAPES algorithm to interpolate the gaps in the aperture for each range, apply 1-D inverse FFTs (IFFTs) and dewindow in range, and finally apply the two-dimensional (2-D) APES algorithm to the interpolated matrix to obtain the 2-D SAR image. Numerical results are presented to demonstrate the effectiveness of the proposed algorithm