用Walsh函数方法的阶梯波式DC/AC变换器的设计与实现

讨论了阶梯波式 DC/AC变换器的一种新的设计与实现方法 ,即用 Walsh函数方法及矢量合成原理分析、综合和设计。试验结果表明实现了逆变器结构的简化及其输出电压频率稳定 ,幅值便于调节与自动稳定。给出了有关硬件、软件框图与说明、试验结果及进一步设想     

Improved DC/AC interface inverter for high-frequency spaceapplications

A DC/AC interface inverter for a high-frequency space power distribution system that uses dual asymmetrical resonant bridges is examined. Compared to the conventional approach in which two symmetrical bridges are used, the asymmetrical bridges arrangement offers better use of the installed kVA rating and efficiency of the inverter system. A simplified approach for modeling the inverter system in steady-state is presented, and a criteria to select the resonant components is given. A detailed simulation is performed for the following: a symmetrical inverter system with a resistive load, an asymmetrical inverter system with a resistive load, and an asymmetrical inverter system with the type-1A AC/DC converter load     

混合型逆变器的空间矢量调制策略优化

高速永磁同步电机驱动系统具有电磁时间常数小、高速区载波比低的特征,加剧了电流纹波,影响系统效率、振动噪声和电磁干扰。为降低高速永磁同步电机的电流纹波,基于SiC-MOSFET/Si-IGBT混合型逆变器设计了一种改进型低损耗空间矢量调制算法。首先,通过调整零电压矢量的生成方式和各功率器件的开关动作时序,将大部分开关动作转移至低损耗的SiC-MOSFET中,并为高损耗的Si-IGBT提供零电压开关条件,降低了逆变器损耗,提高了驱动系统的效率和可用开关频率,逆变器开关频率的提高有效降低了电机电流纹波。其次,对该算法作用时的电流纹波特性进行深入分析,在此基础上提出一种变开关频率模式的最优交轴电流纹波峰值调制算法以优化交轴电流纹波性能。然后,根据预测的交轴电流纹波峰值实时调整载波频率,通过削峰填谷的方式对交轴电流纹波进行平均,在不增加开关损耗的条件下,分散开关能量、降低转矩脉动、改善振动噪声和电磁兼容性能。所提方案的优势在于：较于传统型逆变器,逆变器开关损耗降低、效率提高,可进一步提升开关频率以改善电流纹波;较于传统空间矢量调制算法,改进了电压矢量的生成方式,并利用载波频率这一新增自由度分散能量,降低了交轴电流纹波。最后,通过仿真与实验对所提出算法的有效性进行了验证。     

A 20 kHz hybrid resonant power source for the space station

A hybrid resonant inverter system is presented that satisfies the steady-state operating requirements of a power source for the proposed International Space Station mobile servicing system. The steady-state behavior of the inverter was analyzed and a method is described for optimizing the design of the resonant network. The performance characteristics such as the total harmonic distortion of the output voltage, RMS output voltage, and the inverter efficiency are presented. The hybrid resonant inverter system maintains an excellent efficiency over varying output-load demand     

Adaptive Control of a Current-Fed Induction Motor

An adaptive nonlinear control system is presented for a currentsource inverter-fed induction motor. The approach to the control problem is fundamentally different to previous work in that it uses the steady-state model to formulate a nonlinear control which directly controls the shaft speed. The controller is adaptive, so neither load nor machine parameters need to be specified, although in practice the latter would always be known since they are required for the current-source inverter design.     

ACSS for paralleled multi-inverter systems with DSP-based robust controls

An averaged current-sharing strategy (ACSS) for paralleled multi-inverter systems with digital signal processor (DSP)-based robust controls is presented. With an ACSS, the inverters are in parallel operation and each inverter has a voltage robust controller to achieve system stability and robustness, and a current robust controller to track the averaged inductor current of the inverters to achieve equal current distribution. In the proposed system, the current-sharing control loop is independent of the voltage control loop. Therefore, equal current distribution among the inverters, fast response, and tight regulation can be achieved. Additionally, the ACSS in each inverter can be readily implemented with two operational amplifiers. Simulation results and hardware measurements or a single-inverter system and a two-inverter system, and simulation results of a three-inverter system with linear and nonlinear loads have demonstrated the feasibility of the proposed control scheme in equal current distribution and fast regulation.     

一种新型航空静止变流器的研究

 提出了一种新型的航空静止变流器方案, 采用分布式电能变换技术, 系统由规格统一、种类有限的印刷线路板构成, 没有高压功率器件, 可以克服目前静止变流器技术能量集中变换和结构复杂等缺点。变流器由4 个推挽正激变换器和4 级级联逆变器组成。分析了系统的工作原理和控制方案。研制的原理样机验证了该静止变流器具有效率高、输出波形质量好、可靠性高、工程实现简便等特点。     

SPWM逆变器交流瞬时值反馈控制系统分析

针对应用于交直交VSCF飞机电源系统的SPWM逆变器,提出了包含交流电流内环和交流电压外环的双闭环控制系统方案,利用交流瞬时值反馈的波形校正作用使逆变器输出电压波形得以改善。通过对单相1 kVA SPWM逆变器双闭环控制系统的设计分析和实验研究,结果表明:采用交流瞬时值反馈控制的SPWM逆变器具有较好的输出电压波形、动态响应特性和稳态调压精度,对逆变器输入直流电压的变化影响有很好的抑制作用,适合任由永磁无刷直流发电机供电的VSCF电源系统中应用。     

一种改进的LCL并网逆变器控制方法的研究

LCL型滤波器相对于L型滤波器对交流侧电流中的高频谐波有更强的抑制能力,因此也越来越多地被用于逆变器中。研究了在独立工作模式和并网逆变模式间的切换过程中如何做到无扰动切换。在独立和并网逆变两种模式下分别对空载电压和并网电流直接控制。在对比传统电压电流控制情况下, 对电压电流控制进行改进。通过MATLAB/Simulink仿真平台,建立了LCL型滤波的逆变器并网模型,仿真分析证明了可行性。     

航空变速恒频电源系统中优化的SPWM调压研究

 在航空变速恒频系统（VSCF）中，航空发电机发出的变频交流电经整流变换为直流电，再经逆变器变换成恒频交流电。逆变器通常采用固定开关点的优化的ＳＰＷＭ技术，通过调节发电机激磁调节输出电压。由于系统是高阶系统，为了降阶，提出改变开关点的位置来调节输出电压，并提出优化ＳＰＷＭ的定义，分析了调节范围和谐波含量的变化，并给出了实现电路。     

功率MOSFET逆变器在VSCF电源中的应用

 以用于交直交飞机VSCF电源系统的SPWM逆变器作为研究对象。利用数字计算机对自然采样SPWM过程进行了数值分析,得到SPWM逆变器输出电压频谱与脉宽调制参数(M、N)之间的关系。同时,数值分析考虑了GTR存贮时间t_s和导通延迟时间t_0对SRWM频谱的影响。选择新型功率开关器件—功率MOSFET构成小容量VSCF电源的逆变器。并给出两种高效、可靠的功率MQSFET栅极驱动电路及逆变器的试验特性,     

故障诊断的神经网络观测器法

以神经网络的自学习代替故障诊断观测器法中的解析计算,提出了一种新的故障诊断方法,从而解决了具有模型不确定性系统的故障诊断问题。对某型航空发动机控制系统传感器故障进行了仿真研究,该方法不仅具有传统观测器法报警及时准确、易于实现容错控制的优点,又不需要获得系统精确的数学模型,对具有模型不确定性系统的故障诊断与容错很有效     

功率提取法在涡喷发动机起动特性模拟及控制规律设计中的应用

针对涡喷发动机起动控制规律的特点,将涡轮发动机加、减速控制规律设计的功率提取法模型,应用于航空涡喷发动机起动控制规律的设计.结合低转速部件特性预测方法和改进的功率提取法,给出了涡喷发动机起动控制规律设计的约束条件和设计步骤.该模型可以用于起动带转过程中起动机带转功率的预测,以及全包线范围内、全气候条件下的涡喷发动机起动控制规律的快速、准确设计.计算结果表明,根据功率提取法模型设计的起动控制规律与实际的发动机起动控制规律吻合较好,该方法具有较好的工程应用价值.      

双零序分量注入的六相载波脉宽调制技术

针对常规六相正弦脉宽调制(PWM)算法直流电压利用率低的问题,研究了一种基于双零序信号注入的六相载波脉宽调制算法。该算法通过在正弦调制波中注入一定双零序分量来提高六相逆变器的控制性能。分析了该算法双零序分量变化范围以及直流电压利用率的提升原理,给出了3种具有不同输出特性的双零序注入方法。通过对均值零序注入法进行仿真可以看出,该算法能增大直流电压利用率,改善系统运行特性,验证了该PWM算法的有效性和可行性。     

一种单相光伏并网逆变器改进预测电流控制算法

光伏并网逆变器传统预测电流控制算法由于采样与计算延时会造成差一拍控制,使得逆变器并网电流不能很好地跟踪目标电流,同时逆变器滤波电感模型值与实际值有误差时会造成并网电流谐波大,还可能导致系统不稳定。为克服这些不足,提出了一种改进的预测电流控制方法,可提前一个采样周期对并网逆变器输出电压进行预测,同时利用递推最小二乘法对电感参数进行在线辩识。仿真和试验结果表明所提方法有效提高了逆变器并网电流对目标电流的跟踪精度,减小了并网电流的谐波分量,提高了由逆变器进网的电能的质量。     

计入导线故障的民机安全性定量分析方法研究

将导线故障引入安全性定量分析方法中,介绍了安全性分析的现状、存在的问题以及计入导线故障的必要性。通过将导线故障和安全性分析相结合,提出一种计人导线故障的安全性定量分析方法。对影响导线故障的机理进行探究与分析,提出“导线故障率影响因子”概念,阐述了影响导线故障率的主要因素及其类型,建立了一种民用飞机实际导线故障率计算方法与模型,以及在单一状态和多种状态下导线故障率计算方法,并对方法进行案例分析,使安全性定量分析更准确、有效和完善,大大减少了导线故障所引起的不安全事件,为民用飞机安全性和合格审定工作提供了有力的支持。     

High accuracy navigation and landing system using GPS/IMU systemintegration

In this paper, the accuracy, integrity and continuity of function requirements for automatic landing systems using satellite navigation systems are discussed. Such a landing system is the integrated navigation and landing system (INLS) developed by Deutsche Aerospace (DASA/Ulm, Germany). The system concepts of the INLS are presented. It is shown how an INLS, based on system integration of a satellite navigation system (e.g., GPS) in realtime differential mode with an inertial measurement unit (IMU) in the accuracy class of an attitude and heading reference system (AHRS), can meet the requirements: the results given are mainly devoted to the accuracy issues. Using Kalman filter techniques, an in-flight calibration of the IMU is performed. The advantage of system integration, especially in dynamic flight conditions and during phases of flight with satellite masking, is explained. The accuracy, integrity and continuity of function of the INLS were proven by means of flight tests in a commuter aircraft using a laser tracker as a reference. These flight tests have shown that the short-term accuracy (<60 seconds) of the AHRS used within the INLS has been improved from low cost sensor quality to the accuracy of a high quality laser inertial navigation system (LNIS). With the presented INLS, a landing at any airfield, not equipped with conventional Instrument Landing System (ILS) or Microwave Landing System (MLS), is possible by using a very cost effective system. The INLS is a high accuracy navigation and landing system designed to be used instead of conventional landing systems at small airfields and to fill operational gaps of conventional navigation and landing systems in cruise and approach on large airports     

Nonelectronic Parts Reliability Philosophy

Prepared specifically for those engineers having responsibility for the design, evaluation, or application of mechanical or electromechanical parts and components, the state-of-the-art in nonelectronic component reliability is examined from the viewpoint of history, ancient and modern. A technique is presented to measure the relative overall effect of failure of nonelectronic components in so-called electronic systems. Failure data from the 413L system are analyzed to reveal significant failure modes and mechanisms which are of value in designing for, or assessing the reliability of, a specific component. An overall ?Figure of Hazard? for failure mechanisms is presented.     

单逆变器驱动的多相电机串联系统综述

为了实现同一逆变器(VSI)供电的多电机独立运行的问题,近年来提出了一种新颖的基于广义零序谐波分量的多相电机串联系统。文章对这种新型的单逆变器驱动多相多电机串联系统的发展需求、工作原理、国内外研究概况等方面进行了详细地阐述,深入地分析了这种驱动系统的优缺点,总结了需要深入研究的关键技术。     

Efficient adaptive Kriging for system reliability analysis with multiple failure modes under random and interval hybrid uncertainty

In the field of the system reliability analysis with multiple failure modes, the advances mainly involve only random uncertainty. The upper bound of the system failure probability with multiple failure modes is usually employed to quantify the safety level under Random and Interval Hybrid Uncertainty(RI-HU). At present, there is a lack of an efficient and accurate method for estimating the upper bound of the system failure probability. This paper proposed an efficient Kriging model based on nume...