Tracking of crossing targets with imaging sensors

The authors present an algorithm for the tracking of crossing targets using the centroid measurement and the centroid offset measurement of the distributed image formed by the targets. The measurements are obtained by a forward-looking infrared (FLIR) imaging sensor. The joint probabilistic data association merged-measurement coupled filter (JPDAMCF) is used for state estimation which performs filtering in a coupled manner for the targets with common measurements. Two filters are examined: one assuming the displacement noise white and the other one modeling it correctly as autocorrelated. The latter is shown to yield substantially better performance. The proposed algorithm demonstrates the usefulness of the JPDAMCF for tracking crossing targets in combination with the models for the centroid and offset measurements. Even though the centroid offset measurement requires more computations and a more complex model for estimation, it yields significantly better results if the filter accounts for its colored measurement noise     

Noise effects on centroid tracker aim point estimation

An investigation of errors due to noise in centroid tracker aim-point estimation is presented. The centroid tracker discussed is similar to the tracker described by A.L. Gilbert et al. (1980). Simplifications to this algorithm were made so that the derived models would be consistent with the actual tracker algorithm. Two statistical models are derived which relate image noise effects to computation of the target centroid. The first model, the simplified aim-point error model, is derived by assuming that the probabilities of incorrectly classifying target and background pixels are equal. The second model, the extended aim-point error model, is derived by assuming that the probability of incorrectly classifying a target pixel can differ from the probability of incorrectly classifying a background pixel. These models are described and their mathematical implication is discussed. Simulation results which verify the models are presented     

图象序列中机动目标的形心跟踪

从边检测边跟踪的角度探讨了图象序列中机动目标的形心跟踪问题,深入分析了强高斯噪声背景下目标形心估计的统计性质及用于形心估计的图象预处理方法。指出经典的图象二值化变换分割后作形心估计的方法面临着估计偏差和方差的矛盾,提出了用自适应交互三模型(ATIMM)跟踪图象序列中机动目标的方法,同时发现在了解目标形状的条件下,空间匹配滤波,二值变换点集聚类和 ATIMM三者的结合对图象序列中的机动目标具有最好的跟踪性能。     

Monopulse Estimation of the Centroid of an Ensemble of Radar Scatterers

The use of data obtained by a monopulse radar to estimate the location of the radar cross-section centroid of an ensemble of scatterers is discussed. Both dish and phased-array antenna radars are treated. Expressions for the bias and variance of the centroid estimates are presented, including the effects of the radar receiver and beam pattern characteristics, receiver noise, and the video waveform sampling granularity, as well as the target properties. The monopulse tracking approach discussed here is contrasted with a raster scan approach presented previously.     

Radar Measurement Noise Variance Estimation with Several Targets of Opportunity

A number of methods exist to track a target's uncertain motion through space using inherently inaccurate sensor measurements. A powerful method of adaptive estimation is the interacting multiple model (IMM) estimator. In order to carry out state estimation from the noisy measurements of a sensor, however, the filter should have knowledge of the statistical characteristics of the noise associated with that sensor. The statistical characteristics (accuracies) of real sensors, however, are not always available, in particular for legacy sensors. A method is presented of determining the measurement noise variances of a sensor, assumed to be constant, by using multiple IMM estimators while tracking targets whose motion is not known---targets of opportunity. Combining techniques outlined in [2] and [6], the likelihood functions are obtained for a number of IMM estimators, each with different assumptions on the measurement noise variances. Then a search is carried out over a varying grid of IMMs to bracket the variances of the sensor measurement noises. The end result consists of estimates of the measurement noise variances of the sensor in question.     

Angular mean and variance for selected two-source radar-target combinations

Angle tracking of the desired target in the presence of interference is a common radar problem. It can occur when the desired target is competing with a jammer, clutter, or multipath. Angle statistics can vary significantly for a tracking radar depending upon the nature of this interference. The angular mean and variance are presented for three different statistical two-target types for single and multiple measurements. Previously derived values are presented for completeness in conjunction with derivations not found in the open literature. The signal-to-noise ratio is assumed to be large so that the effects of receiver noise may be neglected.     

Discrete-time min-max tracking

The problem of optimal state estimation of linear discrete-time systems with measured outputs that are corrupted by additive white noise is addressed. Such estimation is often encountered in problems of target tracking where the target dynamics is driven by finite energy signals, whereas the measurement noise is approximated by white noise. The relevant cost function for such tracking problems is the expected value of the standard H/sub /spl infin// performance index, with respect to the measurement noise statistics. The estimator, serving as a tracking filter, tries to minimize the mean-square estimation error, and the exogenous disturbance, which may represent the target maneuvers, tries to maximize this error while being penalized for its energy. The solution, which is obtained by completing the cost function to squares, is shown to satisfy also the matrix version of the maximum principle. The solution is derived in terms of two coupled Riccati difference equations from which the filter gains are derived. In the case where an infinite penalty is imposed on the energy of the exogenous disturbance, the celebrated discrete-time Kalman filter is recovered. A local iterations scheme which is based on linear matrix inequalities is proposed to solve these equations. An illustrative example is given where the velocity of a maneuvering target has to be estimated utilizing noisy measurements of the target position.     

Surface movement radar data processing methods for airportsurveillance

An airport surveillance function operating on surface movement radar (SMR) images is proposed and evaluated. The main contributions presented are the statistical error models of the target centroid and attributes extracted from radar images, developed and applied to the design of its main data processing blocks. Besides a multihypothesis image-to-tracks assignment method, a tracking filter using the extracted orientation and a classification scheme based on target attributes is detailed. The error models confidence and processing methods performance are demonstrated through simulation in representative scenarios     

Canonical transform for tracking with kinematic models

A canonical transform is presented that converts a coupled or uncoupled kinematic model for target tracking into a decoupled dimensionless canonical form. The coupling is due to non-zero off-diagonal terms in the covariance matrices of the process noise and/or the measurement noise, which can be used to model the coupling of motion and/or measurement between coordinates. The decoupled dimensionless canonical form is obtained by simultaneously diagonalizing the noise covariance matrices, followed by a spatial-temporal normalization procedure. This canonical form is independent of the physical specifications of an actual system. Each subsystem corresponding to a canonical coordinate is characterized by its process noise standard deviation, called the maneuver index as a generalization of the tracking index for target tracking, which characterizes completely the performance of a steady-state Kalman filter. A number of applications of this canonical form are discussed. The usefulness of the canonical transform is illustrated via an example of performance analysis of maneuvering target tracking in an air traffic control (ATC) system.     

Target tracking using infrared measurements and laser illumination

A missile target tracker is designed using a filter/correlator (with adaptive target shape identification) based on forward-looking infrared (FLIR) sensor measurements to track the center-of-intensity of the hardbody/plume combination, and another filter using Doppler and/or speckle information in the return from a low-power laser illuminator to estimate the offset between the intensity centroid and the hardbody center-of-mass. The Doppler information is shown to yield smaller bias and error variance from the tracker than the speckle information. Performance of trackers based on just Doppler or both Doppler and speckle information from the laser return is portrayed as a function of important parameters in the tracking environment     

Data fusion and tracking using HMMs in a distributed sensor network

This work deals with the problem of multiple target tracking, from the measurements made on a field of passive sonars activated by an active sonar (multistatic network). The difficulties encountered then are of two kinds: each sensor alone does not provide full observability of a target, and multiple, possibly maneuvering targets moving in a cluttered environment must be dealt with. The algorithm presented here is based on a discrete Markovian modelization of the targets evolution in time. It starts with a fusion of the detections obtained at each measurement time. Tracking and target motion analysis (TMA) are next achieved thanks to dynamic programming (DP). This approach leads to multiple and maneuvering target tracking, with few assumptions; for instance, the use of deterministic target state models are avoided. Simulation results are presented and discussed.     

Airborne GMTI radar position bias estimation using static-rotatortargets of opportunity

In target tracking systems: using GMTI (ground moving target indicator) radars on airborne platforms, the locations of these platforms are available from GPS-based estimates. However, these estimated locations are subject to errors that are, typically, stationary autocorrelated random processes, i.e., slowly varying biases. In situations where there are no known-location targets to estimate these biases, the next best recourse is to use targets of opportunity at fixed but unknown locations. Such targets can be, e.g., static rotators (ground-based radars with rotating antenna), which yield detections in moving target indicator (MTI) radars. It is shown that these biases can be estimated in such a scenario, i.e., they meet the complete observability condition. Following this, the achievable accuracy for a generic scenario is evaluated. It is shown that accurate georegistration can be obtained even with a small number of measurements     

IMM estimator with out-of-sequence measurements

In multisensor tracking systems that operate in a centralized information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence. In order to avoid either a delay in the output or the need for reordering and reprocessing an entire sequence of measurements, such measurements have to be processed as out-of-sequence measurements (OOSMs). Recent work developed procedures for incorporating OOSMs into a Kalman filter (KF). Since the state of the art tracker for real (maneuvering) targets is the interacting multiple model (IMM) estimator, the algorithm for incorporating OOSMs into an IMM estimator is presented here. Both data association and estimation are considered. Simulation results are presented for two realistic problems using measurements from two airborne GMTI sensors. It is shown that the proposed algorithm for incorporating OOSMs into an IMM estimator yields practically the same performance as the reordering and in-sequence reprocessing of the measurements. Also, it is shown how the range rate from a GMTI sensor can be used as a linear velocity measurement in the tracking filter.     

An interacting multiple model approach for target tracking withglint noise

The application of the interacting multiple model (IMM) estimation approach to the problem of target tracking when the measurements are perturbed by glint noise is considered. The IMM is a very effective approach when the system has discrete uncertainties in the dynamic or measurement model as well as continuous uncertainties. It is shown that this method performs better than the “score function” method. It is also shown that the IMM method performs robustly when the exact prior information of the glint noise is not available     

Temporally staggered sensors in multi-sensor target tracking systems

For a multi-sensor target tracking system, the effects of temporally staggered sensors on system performance are investigated and compared with those of synchronous sensors. To capture system performance over time, a new metric, the average estimation error variance (AEV), is proposed. For a system that has N sensors with equal measurement noise variance, numerical results show that the optimal staggering pattern is to use N uniformly staggered sensors. We have also shown analytically that the AEV of the system with N uniformly staggered sensors is always smaller than that of the system with N synchronous sensors. For sensors with different measurement noise variances, the optimal staggering pattern can be found numerically. Practical guidelines on selecting the optimal staggering pattern have been presented for different target tracking scenarios. Due to its simplicity, uniform staggering can be used as an alternative scheme with relatively small performance degradation.     

基于序列图像的航天器自主导航降维滤波方法

非合作目标的运动感知与状态估计,是太空领域技术发展的重要组成部分。非合作目标相对状态的精确估计是相对导航的难点问题。传统的非合作目标扩展卡尔曼滤波算法需要结合非合作目标的质心位置,增加了状态变量的维数,提高了系统不确定性,从而会影响状态扩展卡尔曼滤波的收敛速度。提出了一种基于序列图像的非合作目标相对导航方法,该方法在不对质心进行估计的情况下首先对非合作目标姿态进行估计,在完成非合作目标姿态估计后再对其质心进行估计。本文推导了光学相机测量值与目标真实姿态的关系,构建了基于序列图像的测量模型,分别建立了不含有非合作目标质心位置的状态方程和基于非合作目标位置、速度矢量的状态方程,设计了适用于非合作目标状态估计的扩展卡尔曼滤波算法。仿真实验表明该方法可在10 Hz采样频率下经过50次采样（即5 s）内快速收敛,从而有利于空间飞行器的在轨服务与维护。     

Removal of Out-of-Sequence Measurements from Tracks

In multisensor tracking systems that operate in a centralized or distributed information processing architecture, measurements from the same target obtained by different sensors can arrive at the processing center out of sequence due to system latencies. In order to avoid either a delay in the output or the need for reordering and reprocessing entire sequences of measurements, such latent measurements have to be processed by the tracking filter as out-of-sequence measurements (OOSM). Recent work developed a "one-step" procedure for incorporating OOSM with multiple-time-step latency into the tracking filter, which, while suboptimal, was shown to yield results very close to those obtained by reordering and reprocessing an entire sequence of measurements. The counterpart of this problem is the need to remove (revocate) measurements that have already been used to update a track state. This can happen in real-world systems when such measurements are reassigned to another track. Similarly to the problem of update with an OOSM, it is desired to carry out the removal of an earlier measurement without recomputing the track estimate (and the data association) using possibly a long sequence of subsequent measurements one at a time. A one-step algorithm is presented for this problem of removing a multistep OOSM.     

Tracking Accuracies with Position and Rate Measurements

Tracking accuracies for the radial component of motion are computed for a track-while-scan radar system which obtains position and rate data during the dwell time on a target These results will be of interest to persons developing trackers for pulse Doppler surveillance radars. The normalized accuracies, computed for a two state Kalman tracking filter with white noise maneuver capability, are shown to depend upon two parameters, r = 4?0/?aT2 and s = ?dT/?0. The symbols ?0 and ?d are the position and rate measurement accuracies, respectively, ?a is the standard deviation of the white noise maneuver process and T is the antenna scan time. The scalar tracking filter equations are derived and numerical results are presented. Lower steady state tracking errors plus the earlier attainment of steady state accuracies are the direct consequence of incorporating the rate measurements into the tracking filter.     

Phase Monopulse Error Due to Nonuniform Noise Background

A phase monopulse antenna system can be used for the high accuracy tracking of active or passive objects in space or on earth. Far-field noise sources that are present in the background of the object being tracked will introduce an offset or bias error in the determination of the angle of incidence of the coherent sinusoidal wave received from the source. The dependency of this bias error upon the nonuniformity of the noise background or equivalently upon the asymmetry of the antenna patterns about the direction to the signal being tracked is determined. Although the variance in the measurement of the sinusoidal source direction can be reduced by increasing the post detection integration time, it is shown that the bias or offset error is unaffected by this change. In order to decrease the offset or bias error the predetection bandwidth must be reduced.