共查询到20条相似文献,搜索用时 906 毫秒
1.
介绍了UMAC控制系统的特性,根据爬行机器人制孔设备的结构特点与工艺需求,设计了一套基于UMAC多轴运动控制器的控制系统,阐述了UMAC多轴控制器的硬件系统搭建与软件设计方法,分析了UMAC PID伺服调整中常见的参数设定问题,并给出解决方法。 相似文献
2.
3.
4.
5.
为实现在超精密两轴车床上对离轴抛物面这类非回转对称的复杂曲面的车削,提出了一种利用UMAC的外部时基控制的方法实现离轴抛物面的加工。首先分析了离轴抛物面的加工原理和方法,依据平移旋转方程对工件的坐标进行转换,着重研究了UMAC运动控制卡的时基协调控制功能,以完成离轴抛物面的车削。最后进行了工艺试验,对于700mm×700mm的离轴抛物面,面型精度RMS达到2μm,粗糙度Ra=0.02μm。 相似文献
6.
为解决无人机单机任务的不足,提出了一种多参数分段式无人机轨迹规划方法,并基于此完成了四种编队队形的设计,设计并实现了多无人机编队飞行控制系统。通过开展编队飞行试验验证发现,轨迹跟踪偏差小于0. 16m,多自由度飞行速度平均误差0. 0093m/s,多无人机间距远大于无人机轴间距的2倍,验证了编队飞行控制系统的有效性。 相似文献
7.
本文介绍了一种基于感应同步器的时钟同步转台控制系统,该系统将感应同步器做为转台的位置反馈元件,采用鉴幅式测角电路作为转台位置传感器接口,将前放电路固定在轴端,最后通过提高接口电路的CPU处理速度、增加时钟同步机制、高速输出接口等措施解决了由于转台系统控制时钟与感应同步器测角时钟不同步导致的位置数据不可靠的问题,实现了在转台运动控制系统中的闭环应用,同时解决了原鉴相式感应同步器控制系统中由于工控机升级引起的中断瓶颈问题,并最终实现了0.00005°的角度分辨力。 相似文献
8.
传统的重复使用运载器的制导系统与控制系统的设计是分开进行的。当运载器出现故障时,需要进行轨迹和控制的重构,故障下气动特性和配平能力的变化使得重构后的制导系统与控制系统难以良好匹配。考虑到控制系统对轨迹设计和优化的影响,通过将三自由度轨迹优化与多舵面控制分配结合,提出一种考虑控制舵面气动力和故障的重复使用运载器轨迹优化方法。仿真结果表明,多舵面控制分配算法可以将运载器故障下的配平能力转化为轨迹优化的约束条件,从而避免了传统三自由度轨迹优化方法结果无法被控制系统跟踪的可能性,并为制导与控制一体化设计提供参考依据。 相似文献
9.
10.
介绍了UMAC控制器及直线电机原理,建立了基于UMAC的直线电机PID的控制算法和参数调节.通过气浮导轨平台进行运动性能的实验,结果表明直线电机控制系统具有快速响应性和良好的低速稳定性,非常适用于超精密机床的进给控制. 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
15.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
16.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
17.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
18.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
19.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献