共查询到20条相似文献,搜索用时 609 毫秒
1.
焊接数据库及专家系统是焊接数字化体系的重要组成部分。近年来,随着航空制造业向数字化、智能化方向转型步伐的加快,吸引了越来越多的航空企业开展航空专用焊接数据库及专家系统设计与开发方面的工作。目前在航空制造领域建立的焊接数据库,已实现航空材料焊接基础数据、焊接参数数据、焊接性能数据及典型案例数据的有效存储和共享。焊接工艺设计专家系统的应用,可辅助焊接工艺文件自动设计与管理,大大缩短了焊接工艺文件编制周期;焊接缺陷诊断专家系统可根据缺陷特征判断缺陷类型,或根据缺陷类型分析缺陷成因,对控制和预防各类缺陷的产生及控制焊接质量具有重要的实际应用价值;焊接信息管理平台在数据库平台、专家系统平台以及用户权限管理基础上,实现了焊接工艺流程的在线智能化协同办公。结合航空制造业焊接数字化发展进程,在已有焊接数据库及专家系统研究的基础上,把焊接质量预测专家系统和制造业大数据分析挖掘技术运用到航空焊接数据库及专家系统设计中,将成为未来航空焊接专家系统的发展趋势。 相似文献
2.
3.
4.
5.
6.
杨育中 《航空标准化与质量》2007,(3):7-8
21世纪,以信息技术为特征的制造业革命正在全球范围内展开,信息技术正在以前所未有的广度和深度渗透到制造业的各个环节中.航空工业是典型的制造业,我国的航空工业正处于快速发展时期.大力推进信息化建设对于提高我国航空工业的竞争力具有十分重要的意义.而信息技术应用标准规范则是实现航空制造业信息生成、集成、交换和共享的技术基础,也是实现设计、制造、试验和管理数字化的基本保证. 相似文献
7.
我国航空制造业数字化技术的发展历程,主要是围绕着设计、制造和生产管理3个主线方向推进.典型模式一般是产品设计以CAD/CAE/PDM等系统为主线,制造以CAD/CAPP/PDM等系统为主线,生产管理以MES/ERP/CRM/SCM等系统为主线.近10年来,我国航空制造业在上述3方面的数字化建设上取得了巨大的成绩.
近年来基于二维(图纸)信息表达与传递方式正在被基于模型的设计方式所取代,产品设计已经全面采用基于模型的设计,使几何信息和非几何信息全部表达在三维模型上,不再需要进行二维非几何信息的补充表述.但是生产制造方面却显不足,主要是由于产品三维设计与二维化制造的不匹配所致.由于三维工艺设计技术的开发和应用远落后于三维产品设计技术,使得三维工艺设计成为产品制造的瓶颈. 相似文献
8.
航空专用设备是飞机制造过程中的关键设备,它是装备制造业与航空制造业紧密合作的产物,双方只有在材料、工艺、制造上紧密合作,才能提升我国航空制造专用设备的水平 相似文献
9.
10.
飞机构件设计/制造过程的数字化趋势是现代飞机研发和生产的一个突出特点.同时,计算机辅助设计与制造技术在航空制造业中发挥着愈来愈重要的作用.随着新型飞机设计过程的数字化转变以及产品种类和产量的逐年增加,传统生产模式的缺陷日益凸显,如何将传统的模线样板制造技术数字化并应用到生产是一个重点课题. 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
15.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
16.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
17.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献
18.
19.
Wu Xianyu Li Xiaoshan Ding Meng Liu Weidong Wang Zhenguo 《中国航空学报》2007,20(6):488-494
In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances. 相似文献
20.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献