采用非线性系统扩展线性化方法设计飞控系统

利用非线性系统的扩展线性化方法设计具有大迎角的非线性飞行控制系统。在系统的静态平衡点族上进行线化及调节器设计并直接积分得到非线性控制律,同时利用等效系统法验证飞行品质。整个设计过程较简便,控制律便于实现,飞机的失速迎角有较大提高,飞行品质也是令人满意的。     

一种非线性末制导系统模型的精确线性化

针对未来高机动目标的拦截 ,运用非线性系统几何理论中的精确线性化方法 ,设计了一种空空导弹非线性末制导系统加速度指令。假设目标做逃逸机动 ,弹体 -自动驾驶仪响应用一个二阶环节描述 ,建立了导弹目标三维相对运动方程。根据终端约束直接选取系统输出阵 ,经动态反馈线性化 ,将非线性系统模型转化为线性方程 ,求得了目标任意机动时的非线性末制导系统的加速度指令。以纵向平面为例进行了仿真计算 ,结果表明该方法是行之有效的 ,得到的解可以用来改进导弹大离轴发射角时的进攻能力。     

非线性反馈线性化方法在飞控系统中的应用

应用非线性反馈精确线性化方法进行了飞机自动着陆系统设计。首先,用非线性微分方程组表示的飞机纵向控制系统,在经过输入输出反馈线性化以后,可等效为线性系数;然后,用线性的ＰＩＤ控制方法对变换后的线性系统进行了设计;最后,考虑风的干扰,对所设计的飞机自动着陆控制系统进行了数字仿真。仿真结果表明,用反馈线性化方法设计的飞控系统具有良好的性能。     

Elastic Robot Control: Nonlinear Inversion and Linear Stabilization

An approach to the control of elastic robot systems for space applications using inversion, servocompensation, and feedback stabilization is presented. For simplicity, a robot arm (PUMA type) with three rotational joints is considered. The third link is assumed to be elastic. Using an inversion algorithm, a nonlinear decoupling control law Ud is derived such that in the closed-loop system independent control of joint angles by the three joint torquers is accomplished. For the stabilization of elastic oscillations, a linear feedback torquer control law us is obtained applying linear quadratic optimization to the linearized arm model augmented with a servocompensator about the terminal state. Simulation results show that in spite of uncertainties in the payload and vehicle angular velocity, good joint angle control and damping of elastic oscillations are obtained with the torquer control law u = ud + us.     

Aeroservoelastic stability analysis for flexible aircraft based on a nonlinear coupled dynamic model

A unified theoretical aeroservoelastic stability analysis framework for flexible aircraft is established in this paper. This linearized state space model for stability analysis is based on nonlinear coupled dynamic equations, in which rigid and elastic motions of aircraft are both considered. The common body coordinate system is utilized as the reference frame in the deduction of dynamic equations, and significant deformations of flexible aircraft are also fully concerned without any excessive assumptions. Therefore, the obtained nonlinear coupled dynamic models can well reflect the special dynamic coupling mechanics of flexible aircraft. For aeroservoelastic stability analysis, the coupled dynamic equations are linearized around the nonlinear equilibrium state and together with a control system model to establish a state space model in the time domain. The methodology in this paper can be easily integrated into the industrial design process and complex structures. Numerical results for a complex flexible aircraft indicate the necessity to consider the nonlinear coupled dynamics and large deformation when dealing with aeroservoelastic stability for flexible aircraft.     

基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模控制

针对涡扇发动机内部状态大范围变化条件下,单点线性控制器控制效果不佳而线性变参数控制器求解困难的问题,提出了一种基于多入多出平衡流形展开模型的涡扇发动机反馈线性化滑模变结构控制。首先,采用多入多出平衡流形展开模型辨识技术,获得仿射型的涡扇发动机数学模型。随后,利用反馈线性化将平衡流形展开模型解耦,经过坐标变换获得可用于控制系统设计的线性结果,考虑了具有误差项和饱和函数的指数趋近滑模控制律来提高控制系统的鲁棒性,完成了基于平衡流形展开模型的多变量涡扇发动机反馈线性化滑模控制器设计。最后,在非线性部件级模型上开展了控制器验证。在平衡流形展开模型设计工况,增益控制和滑模控制的控制效果表明,基于平衡流形展开模型的反馈线性化方法能够获得涡扇发动机良好的控制效果。同时,在平衡流形展开模型稳定但精度无法保证的非设计飞行工况,反馈线性化滑模控制器能够进一步抑制不确定性的影响,保证转子转速和发动机压比的跟踪控制效果。     

Kalman Filtering with Nonlinear State Constraints

An analytic method was developed by D. Simon and T. L. Chia to incorporate linear state equality constraints into the Kalman filter. When the state constraint was nonlinear, linearization was employed to obtain an approximately linear constraint around the current state estimate. This linearized constrained Kalman filter is subject to approximation errors and may suffer from a lack of convergence. We present a method that allows exact use of second-order nonlinear state constraints. It is based on a computational algorithm that iteratively finds the Lagrangian multiplier for the nonlinear constraints. Computer simulation results are presented to illustrate the algorithm.     

无定心弹簧刚性转子—SFDB系统非同步稳态响应的稳定性分析

本文用谐波平衡法研究了无定心弹簧刚性转子—挤压油膜阻尼器轴承 (SFDB)系统的稳态响应和稳定性,其中通过二个耦合的二阶微分方程来近似模拟运动,非线性油膜力作用处的非同步稳态响应通过运动微分方程的周期解求得。本文建立了油膜力的等效线性化模型。提出了新的稳定性分析方法。利用导出的等效动力特性系数建立了稳定性分析的判据,证明满足此判据的稳态响应是稳定的。      

空间机器人抓捕目标后的载荷分配

针对多臂空间机器人以软指接触形式抓捕目标后的情形,提出了一种综合考虑摩擦约束及机械臂能力约束的目标期望合外力的载荷分配方法。首先,建立空间机器人系统与目标的动力学方程,作为载荷分配问题的基础。然后,在地面机器人相关研究的基础上,建立机械臂末端与目标表面的软指接触模型,并建立二者之间的运动约束关系。为简化优化计算,将摩擦锥约束线性化,并建立考虑关节扭矩限制的机械臂能力约束,从而将抓捕力优化的非线性规划问题转化为线性规划问题。最后,采用双臂空间机器人模型进行数值仿真,表明所提方法针对目标各种形式运动进行载荷分配的有效性。     

基于支持向量机的航空发动机PID解耦控制

针对航空发动机多变量控制系统中各回路之间存在的耦合现象,提出了一种基于支持向量机(support vector machines,SVM)的航空发动机PID(proportion integration differentiation)解耦控制方法.利用SVM辨识发动机非线性模型,并获得SVM瞬时线性化模型,在线性化模型的基础上完成了PID参数的在线自整定.利用Lyapunov稳定性定理对控制器的收敛性进行了分析.通过对某型航空发动机的仿真,验证了该方法的有效性和可行性.      

基于多模型预测的再入飞行器制导方法

在具有控制和轨迹约束的再入制导中,提出了一种新的基于多模型预测再入飞行器纵向制导方法。首先对再入飞行器的纵向运动方程沿着标准轨道线性化,基于分段仿射约束系统建模理论逼近原非线性系统,并采用线性矩阵不等式(LMIs)优化技术离线将保证闭环系统稳定的终端二次代价项求出;然后,在每个制导周期内,基于多模型预测在线求解构造好的有限时域优化目标,从而获得控制量的增量,并把第一个控制增量分量与标准轨道的控制量叠加后形成全量控制,用于实际再入轨道的制导,而在下一个制导周期基于新的状态参数重复上面的优化过程。数字仿真结果证实了所提方法的有效性。     

Review of unsteady transonic aerodynamics: Theory and applications

Unsteady transonic flow theory is reviewed and classical results from the nonlinear asymptotic theory are combined with new results from computational fluid dynamics. The emphasis is on applications to the field of aeroelasticity and on clarifying the limitations of linearized theories in problems involving mixed subsonic-supersonic flows. The inherent differences between nonlinear transonic aerodynamics and linear subsonic and supersonic aerodynamics are considered from a theoretical and computational standpoint, and the practical implications of these differences in formulating suitable aerodynamic models for aeroelastic stability calculations are discussed. Transonic similarity principles are reviewed and their relevance in understanding flutter, divergence, and control reversal phenomena of transonic aircraft is illustrated through practical examples.     

基于Wash-out滤波器技术的机翼颤振控制

研究应用wash-out滤波器技术对具有立方非线性俯仰刚度的二元机翼颤振的控制。首先,确定需要引入Hopf分岔的点,并在该点将原系统方程Jordan化;其次,对于引入的wash-out滤波控制器,先按Hopf分岔条件确定线性控制增益,再用规范型直接法得到受控系统的规范型,由分岔类型与规范型系数的关系确定非线性控制增益,从而将原系统的亚临界Hopf分岔变为超临界Hopf分岔;最后通过数值模拟验证了控制的有效性,并发现受控系统的颤振幅值（极限环大小）大大降低。     

机载跟踪雷达的次最优控制

 本文把机载跟踪雷达的目标视为匀速直线运动叠加一阶马尔柯夫过程,在视线坐标系内建立状态方程和观测方程。采用二次型性能指标,用E-coupling法求得次最优控制律。模拟计算表明,采用该控制律的系统具有很高的跟踪精度,比经典比例控制大约提高一个数量级,和最优控制相当。     

基于全欧拉方程的二维平行剪切层声波产生和辐射的数值模拟

本文基于全欧拉方程对二维平行剪切层声波的产生和辐射进行了计算气动声学数值模拟。空间离散采用了频散相关保持有限差分格式,时间积分采用了低频散低耗散的龙格库塔法。数值模拟结果表明,当声源强度较小时,基于全欧拉方程的计算结果与解析解及基于线化欧拉方程的计算结果均符合得很好,当声源强度较大时(约140dB),线化欧拉与全欧拉的计算结果有较大的偏差,这说明此时非线性的影响不可忽略,线化方程不再适用。      

带双挤压油膜阻尼器的转子系统动力响应研究

本文针对主轴承带无定心弹簧挤压油膜阻尼器将油膜力系数线性化处理,方便地用传递矩阵和线性迭代计算了非对称柔性转子系统稳态振幅响应。计算结果表明带两个阻尼器的减振效果比带一个阻尼器好。     

Nonlinear filtering: A hybrid approximation scheme

This paper is concerned with nonlinear filtering schemes for systems which allow non-Gaussian noise. Using the most probable trajectory (MPT) approach, a finite-dimensional recursive hybrid filtering scheme is derived. By appropriately selecting a switching process, a linear hybrid system can be obtained that approximates the original nonlinear system. Then the MPT approach is used to obtain the hybrid filtering schemes for the nonlinear systems. Numerical experiments are carried out and reported     

Parameterization and adaptive control of space robot systems

In space application, robot system are subject to unknown or unmodeled dynamics, for example, in the tasks of transporting an unknown payload or catching an unmodeled moving object. We discuss the parameterization problem in dynamic structure and adaptive control of a space robot system with an attitude-controlled base to which the robot is attached. We first derive the system kinematic and dynamic equations based on Lagrangian dynamics and the linear momentum conservation law. Based on the dynamic model developed, we discuss the problem of linear parameterization in term of dynamic parameters, and find that in joint space, the dynamics can be linearized by a set of combined dynamic parameters; however, in inertial space linear parameterization is impossible in general. Then we propose an adaptive control scheme in joint space, and present a simulation study to demonstrate its effectiveness and computational procedure. Because most takes are specified in inertial space instead of joint space, we discuss the issues associated to adaptive control in inertial space and identify two potential problem: unavailability of joint trajectory because the mapping from inertial space trajectory is dynamic-dependent and subject to uncertainty; and nonlinear parameterization in inertial space. We approach the problem by making use of the proposed joint space adaptive controller and updating the joint trajectory by the estimated dynamic parameters and given trajectory in inertial space     

基于LMI极点配置的高空台飞行环境模拟系统PI增益调度控制研究

针对高空台飞行环境模拟系统的温度和压力在整个工作包线内的鲁棒性能控制问题,提出了一种基于LMI极点配置的PI增益调度控制设计方法。在考虑变比热容腔微分方程、管道热传导、调节阀流量特性、液压伺服动态、传感器增益对飞行环境模拟系统造成的建模不确定性的基础上,建立了完整、准确的飞行环境模拟系统非线性模型;对非线性模型进行了线性化,并根据线性模型推导了基于LMI极点配置的PI控制器设计算法;在飞行环境模拟系统的工作包线内选取了36个稳态点设计了基于LMI极点配置的PI增益调度控制器;设计了两种飞行环境模拟试验来验证设计的PI增益调度控制器的鲁棒性能。仿真结果表明,飞行环境模拟系统温度的稳态误差和动态误差均小于0.1%,压力的稳态误差小于0.5%,动态误差小于0.7%。     

基于LMI的二冲程发动机转速鲁棒PI控制

针对某型航空用二冲程发动机,用逐步回归的方法建立发动机非线性稳态模型,在平衡点附近进行泰勒级数展开,得到了发动机在平衡点附近的线性模型;基于线性矩阵不等式(LMI)的方法进行鲁棒控制算法研究,得到了鲁棒PI控制参数,实现了系统的鲁棒控制;基于模糊T-S模型并行分配补偿控制策略,设计了控制算法切换策略.经系统仿真和发动机台架实验验证,在负载11%的扰动下转速控制精度稳定在2.3%之内,控制器对于外界干扰有较强的鲁棒性,得到了期望的控制效果.