某型支线客机高频系统无法发射故障分析

针对某型支线客机高频通信系统出现无法发射的情况,对系统架构进行了介绍,分析了故障产生的原因,提出了排故思路,总结了高频通信系统的设计要点和工艺要点。     

波音787通用处理模块简介及故障处理浅析

简单介绍了波音787通用核心系统（CCS）的组成和通用处理模块（GPM）的作用,结合日常工作中的排故经验,给出故障的快速处理方法,总结不同位置GPM的排故要点和软件装载注意事项,以达到提高航线排故效率的目的。     

民用飞机甚高频通信系统设计

民用飞机进行可靠的空地、空空通信,对飞行安全尤为重要。甚高频(very high frequency,简称VHF)通信系统是目前应用最为广泛的航空通信方式,VHF通信系统通过与机上音频系统交联实现飞机与外部的语音通信,通过与机上数据链系统交联实现飞机与地面的数据链通信。如何确保民用飞机VHF通信系统可靠、稳定地工作,一直是型号设计和适航部门关注的重点,也是型号设计的难点。首先从VHF通信系统的功能定义出发,提出了VHF通信系统的设计方案,进而提出了VHF通信系统的性能要求,最后重点阐述了VHF通信系统的机上设计要求以及系统功能验证过程,对型号设计和工程排故具有指导意义。     

民用飞机甚高频通信系统适航审定技术分析

民用飞机进行可靠的空地、空空通信,对飞行安全尤为重要。甚高频(very high frequency,简称VHF)通信系统是目前应用最为广泛的航空通信方式,VHF通信系统通过与机上音频系统交联实现飞机与外部的语音通信,通过与机上数据链系统交联实现飞机与地面的数据链通信。甚高频通信系统与民用飞机的安全运行密切相关,也是适航规章和运行规章要求的内容。结合甚高频通信系统功能要求和设计架构,针对适用于甚高频通信系统的中国民用航空规章第25部：运输类飞机适航标准(CCAR-25-R4-2011)条款,分析并给出甚高频通信系统可接受的符合性方法,同时根据型号工作经验给出甚高频通信系统在适航审查中的审定要素。针对甚高频通信系统所涉及的各项条款,为局方提供了适航审查工作需要关注的审定要素和评审要求。研究有助于民机甚高频通信系统的安全设计与适航验证。     

简讯(三)

首都机场甚高频通信系统通过验收TheVHFCommunicationSystemoftheCapitalAirportCheckedandAccepted日前，民航总局投资1200万元人民币的首都机场甚高频16信道通信系统，正式通过华北局验收。由华北空管局通信总站从德国R／到罗德施瓦茨）公司引进的R／S－200型历信道甚高频通信系统，是具有国际先进水平的通信设备，主要担负首都机场空中管制部门对空通信联系重任。该系统运行稳定可靠，为空中交通管制员提供了清晰的收发信号和良好的人机界面，充分满足了管制部门的需求，有效地保障了空中交通管制工作的实施。（丁正）莫斯科—深圳…     

波音787飞机电控风挡明暗调节系统及其故障浅析

简要介绍波音787飞机电控风挡明暗调节系统及其部件功能,分析了航线目视检查要点,对典型故障的排除进行了总结,可为提高航线排故效率提供参考。     

飞机维护需要新概念—IFE系统排故有感

飞机系统的设计越来越复杂，机载软件越来越多。本文结合典型故障，对易被忽略却又往往会导致“疑难故障”的软件因素进行了分析和总结，对如何搞好飞机系统的排故工作，提高排故效率进行了探讨。     

论民用航空甚高频通信频率工程技术

一、引言在民用航空地面与空中飞机间的各类话音通信方式中，甚高频（VHF）通信以其较好的话音质量和较经济的建设投资，目前已在世界范围内广泛使用。发达国家更是在一二十年前就已经完成了在陆地范围内的各航路的地空之间甚高频通信覆盖。许多大型的国际机场、空中交通管制中心使用着几十个，乃至几百个甚高频通信频道，提供地空之间的各类通信服务。与发达国家相比，我国民航的地空甚高频通信系统的建设则由于各种原因起步较晚。80年代中期之前，除机场搭台地空通信使用老式电子管的VHF设备提供VHF通信保障以外，当时主要的通信手段…     

基于专家知识的故障诊断隔离系统研究

对试飞阶段外场维护故障信息进行提炼,建立了基于专家知识的飞机排故系统,节省排故时间,提高故障诊断效率。针对已有故障,分析同一故障描述下多种隔离方法无法选择的问题,提出了基于信息库的灰色关联优化模型。针对新兴故障无从下手、排故效率低、周期长的问题,建立了基于电子交互维护手册(IEMM)的故障诊断系统。本文故障诊断系统可保证维护人员在故障发生时更有效地分析故障原因、隔离方法,提高自主排故及外场维护能力。     

空客A320飞机起落架系统非典型故障分析

介绍了几起空客A320飞机起落架系统比较少见的故障,通过查阅飞机排故手册并根据系统工作原理排除了故障,排故经验可供机务维护人员借鉴。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.