太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

日心悬浮轨道混合推进航天器编队构型保持研究

针对混合推进航天器编队日心悬浮轨道保持控制问题进行了研究.首先推导出在日心悬浮轨道附近的航天器编队相对运动方程,考虑到航天器间距离变化值较小且航天器间距离与航天器到太阳的距离的比值为小量,将其在悬浮轨道附近线性化.基于该线性化方程,设计了一种LQR编队控制方式,该控制方式可通过调节太阳帆的姿态及航天器间库仑力的大小对编队构型进行改变或保持,具有响应速度快和控制简单的特点.最后对控制律进行数值仿真,表明该控制方法能实现编队.     

Families of halo orbits in the elliptic restricted three-body problem for a solar sail with reflectivity control devices

Solar sail halo orbits designed in the Sun-Earth circular restricted three-body problem (CR3BP) provide inefficient reference orbits for station-keeping since the disturbance due to the eccentricity of the Earth’s orbit has to be compensated for. This paper presents a strategy to compute families of halo orbits around the collinear artificial equilibrium points in the Sun-Earth elliptic restricted three-body problem (ER3BP) for a solar sail with reflectivity control devices (RCDs). In this non-autonomous model, periodic halo orbits only exist when their periods are equal to integer multiples of one year. Here multi-revolution halo orbits with periods equal to integer multiples of one year are constructed in the CR3BP and then used as seeds to numerically continue the halo orbits in the ER3BP. The linear stability of the orbits is analyzed which shows that the in-plane motion is unstable while the out-of-plane motion is neutrally stable and a bifurcation is identified. Finally, station-keeping is performed which shows that a reference orbit designed in the ER3BP is significantly more efficient than that designed in the CR3BP, while the addition of RCDs improve station-keeping performance and robustness to uncertainty in the sail lightness number.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

Finite-time relative orbit-attitude tracking control for multi-spacecraft with collision avoidance and changing network topologies

This paper addresses the relative position tracking and attitude synchronization control problem for spacecraft formation flying (SFF). Based on the derived relative coupled six-degree-of-freedom dynamics, a robust adaptive finite-time fast terminal sliding mode controller is proposed to achieve the desired formation in the presence of model uncertainties and external disturbances. It is shown that the designed controller is effective for changing information exchange topology making it robust to node failure. Then, the artificial potential function method is employed to generate collision avoidance schemes to modify the controller such that inter-agent collision avoidance can be ensured during the formation maneuver, which is critical for practical missions. The stability of the overall closed-loop system is proved by using Lyapunov theory. Finally, numerical examples for a given SFF scenario are presented to illustrate the performance of the controller.     

Improving magnetosphere in situ observations using solar sails

Past and current magnetosphere missions employ conventional spacecraft formations for in situ observations of the geomagnetic tail. Conventional spacecraft flying in inertially fixed Keplerian orbits are only aligned with the geomagnetic tail once per year, since the geomagnetic tail is always aligned with the Earth-Sun line, and therefore, rotates annually. Solar sails are able to artificially create sun-synchronous orbits such that the orbit apse line remains aligned with the geomagnetic tail line throughout the entire year. This continuous presence in the geomagnetic tail can significantly increase the science phase for magnetosphere missions. In this paper, the problem of solar sail formation design is explored using nonlinear programming to design optimal two-craft, triangle, and tetrahedron solar sail formations, in terms of formation quality and formation stability. The designed formations are directly compared to the formations used in NASA’s Magnetospheric Multi-Scale mission.     

电磁航天器编队位置跟踪自适应协同控制

通过引入一致性理论针对电磁航天器编队相对位置协同控制问题设计了自适应协同控制器。分析了电磁航天器编队的基本原理,建立了电磁航天器编队相对运动精确的非线性动力学方程。基于电磁力远场计算模型的不确定性,对相对运动动力学模型进行了修正。在电磁力计算模型不确定和航天器间存在通信时延的条件下,对位置跟踪控制的目标设计了自适应协同控制器。考虑到电磁航天器磁矩产生能力的不同,给出了通过优化进行磁矩分配的方案。通过仿真表明:所设计的自适应协同控制器不仅实现了对期望轨迹的准确跟踪,而且相比人工势函数法,暂态维持编队构型的能力提高了4.9倍,并且所给出的磁矩分配方案实现了磁矩的合理分配。     

航天器与空间碎片的混合编队重构控制与应用

针对空间碎片清理问题,提出了一种利用航天器与空间碎片混合编队队形重构控制技术捕获碎片的方法。首先,分析了地/月—日系L2拉格朗日平动点附近的限制性三体环境,并建立了编队卫星相对运动动力学模型;其次,提出了以太阳光压力作为航天器与空间碎片编队队形重构的控制力,实现各从星接近空间碎片的目的;最后,设计了基于线性二次型的最优控制器,并在Matlab/Simulink环境下进行仿真实验。仿真结果表明该方法可控制从星到达期望的位置(空间碎片的位置),且太阳帆板的姿态变化在可控范围内,进而证明了该方案可以应用于复杂空间环境下的碎片清理任务。     

Optimal spacecraft formation establishment and reconfiguration propelled by the geomagnetic Lorentz force

The Lorentz force acting on an electrostatically charged spacecraft as it moves through the planetary magnetic field could be utilized as propellantless electromagnetic propulsion for orbital maneuvering, such as spacecraft formation establishment and formation reconfiguration. By assuming that the Earth’s magnetic field could be modeled as a tilted dipole located at the center of Earth that corotates with Earth, a dynamical model that describes the relative orbital motion of Lorentz spacecraft is developed. Based on the proposed dynamical model, the energy-optimal open-loop trajectories of control inputs, namely, the required specific charges of Lorentz spacecraft, for Lorentz-propelled spacecraft formation establishment or reconfiguration problems with both fixed and free final conditions constraints are derived via Gauss pseudospectral method. The effect of the magnetic dipole tilt angle on the optimal control inputs and the relative transfer trajectories for formation establishment or reconfiguration is also investigated by comparisons with the results derived from a nontilted dipole model. Furthermore, a closed-loop integral sliding mode controller is designed to guarantee the trajectory tracking in the presence of external disturbances and modeling errors. The stability of the closed-loop system is proved by a Lyapunov-based approach. Numerical simulations are presented to verify the validity of the proposed open-loop control methods and demonstrate the performance of the closed-loop controller. Also, the results indicate the dipole tilt angle should be considered when designing control strategies for Lorentz-propelled spacecraft formation establishment or reconfiguration.     

姿态角幅值约束下的太阳帆Lissajous轨道保持控制

太阳帆航天器以两姿态角作为轨道控制输入时, 其轨道动力学方程具有非仿射非线性特性. 通过人工平动点处线性化获得的线性系统可完成太阳帆航天器轨道保持控制器的分析与设计. 由于线性近似模型为有误差模型, 存在近似有效范围约束, 表现为轨道高度约束和姿态角幅值约束. 本文研究了姿态角幅值约束对线性近似模型有效性的影响, 通过计算给出满足近似误差要求的姿态角幅值约束. 当控制输入存在幅值约束时, 控制器轨道修正能力受到束缚. 通过研究姿态角幅值约束下的最大允许入轨误差, 设计了最大允许入轨误差下线性二次型调节器(LQR)用于轨道保持控制, 并将控制器应用于太阳帆日地三体系统非线性模型中, 实现了日地人工L₁点Lissajous轨道最大允许入轨误差的控制收敛和良好精度下的轨道保持控制.      

航天器编队飞行多目标姿态跟踪终端滑模控制

研究航天器编队飞行多目标姿态跟踪控制问题.为避免姿态大范围跟踪可能出现的奇点,采用欧拉参数描述航天器姿态.基于终端滑模技术,设计多目标姿态跟踪终端滑模控制器,并应用Lyapunov稳定性理论和扩展的Lyapunov有限时间稳定性理论证明控制系统稳定性和有限时间收敛性.该控制器参数方便调整,易于实现.由于没有对复杂多体航天器动力学进行线性化处理,从而保证了姿态跟踪控制精度.仿真结果表明,存在惯量参数摄动和外部干扰力矩的情况下,所设计的多目标姿态跟踪控制器具有良好鲁棒性和优越的跟踪性能.     

Solar sail near the Sun: Point-like and extended models of radiation source

Some modifications of solar sail radiation pressure forces on a plate and on a sphere for use in the numerical simulation of ‘local-optimal’ (or ‘instantaneously optimal’) trajectories of a spacecraft with a solar sail are suggested. The force model development is chronologically reviewed, including its connection with solar sail surface reflective and thermal properties. The sail surface is considered as partly absorbing, partly reflective (specular and diffuse), partly transparent. Thermal balance is specified because the spacecraft moves from circular Earth orbit to near-Sun regions and thermal limitations on the sail film are taken into account. A spherical sail-balloon can be used in near-Sun regions for scientific research beginning with the solar-synchronous orbit and moving outward from the Sun. The Sun is considered not only as a point-like source of radiation but also as an extended source of radiation which is assumed to be consequently as a point-like source of radiation, a uniformly bright flat solar disc and uniformly bright solar sphere.     

航天器交会中的Lambert问题

应用Lagrange转移时间方程研究空间交会中的Lambert问题,包括经典Lambert问题(飞行弧段不足一圈的椭圆型轨道转移)与多圈Lambert问题(飞行圈数超过一圈的轨道转移),阐述转移轨道的几何特性与转移轨道类型,分析转移时间与转移轨道参数及变轨速度增量之间的关系。对航天器交会中常用的圆轨道之间的双冲量转移,给定转移角与转移时间,阐述最小变轨速度增量所对应的转移圈数与轨道参数的求解方法,提出满足最小变轨速度增量要求的轨道转移的图解法。对给定的初始分离角与交会时间,按最小变轨速度增量要求,确定航天器交会的初始漂移时间、双冲量轨道转移时间与终端停泊时间。     

Systems design of a hybrid sail pole-sitter

This paper presents the preliminary systems design of a pole-sitter. This is a spacecraft that hovers over an Earth pole, creating a platform for full hemispheric observation of the polar regions, as well as direct-link telecommunications. To provide the necessary thrust, a hybrid propulsion system combines a solar sail with a more mature solar electric propulsion (SEP) thruster. Previous work by the authors showed that the combination of the two allows lower propellant mass fractions, at the cost of increased system complexity. This paper compares the pure SEP spacecraft with the hybrid spacecraft in terms of the launch mass necessary to deliver a certain payload for a given mission duration. A mass budget is proposed, and the conditions investigated under which the hybrid sail saves on the initial spacecraft initial mass. It is found that the hybrid spacecraft with near- to mid-term sail technology has a lower initial mass than the SEP case if the mission duration is 7 years or more, with greater benefits for longer duration missions. The hybrid spacecraft with far-term sail technology outperforms the pure SEP case even for short missions.     

Space-based line-of-sight tracking control of GEO target using nonsingular terminal sliding mode

This paper addresses the issue of high-precision line-of-sight (LOS) tracking of geosynchronous earth orbit target in highly dynamic conditions via spacecraft attitude maneuver. First, characteristics of the LOS motion are analyzed by a simplified linear relative motion model. Second, after transforming the quaternion-based attitude model into a double integrator system, a new nonsingular terminal sliding mode controller is proposed for spacecraft attitude tracking in a nominal case without parametric uncertainties and external disturbances. Third, an adaptive new nonsingular terminal mode controller is proposed for spacecraft attitude tracking in an uncertain case, which is done via constructing a pair of adaptive laws to estimate the parametric uncertainties and external disturbances online. The robust stability and finite time convergence property of the closed-loop system are demonstrated by Lyapunov theorem. Under control of the proposed controller, zero steady state error tracking of LOS with a smooth transition phase can be achieved in scheduled time, regardless of parametric uncertainties and external disturbances online. Finally, detailed numerical simulation results are presented to illustrate the effectiveness and performance of the proposed controllers. Contrasting simulation results shows that proposed controllers can track the desired trajectories effectively and have better performance against the controllers based on linear sliding mode and the existing fast nonsingular terminal sliding mode.     

航天器内部磁场环境主动补偿方法

为解决空间引力波探测任务中航天器磁场对惯性传感器干扰的问题,研究在航天器复杂磁环境下利用主动测控方式获取小尺度均匀磁场环境的方法.在惯性传感器周围进行分布式磁场探测,并采用球谐函数法或多磁偶极子法实现对惯性传感器外部磁源的估计,计算惯性传感器所处位置的空间磁场及其梯度分布.利用线圈技术,对磁场及其梯度进行线性补偿.讨论分析传感器数量以及磁源布局方式等因素对最终补偿效果的影响.仿真试验结果表明,通过这一方法可将惯性传感器所在区域的磁场及其梯度降低1～2个数量级,降低引力波航天器平台的剩磁控制压力,为引力波探测提供满足要求的磁场环境.      

基于预设性能控制的超紧密航天器编队防避撞协同控制

研究了考虑具有外界干扰和防避撞约束的近地轨道超紧密航天器构型控制问题,将反步控制技术、预设性能控制相结合,提出了一种基于预设性能鲁棒控制的六自由度编队协同鲁棒控制方法。首先,给出了近地轨道完整的编队航天器相对位置和相对姿态非线性动力学方程,并根据状态约束条件转换了相对位置动力学模型。其次,设计了预设性能函数,通过误差转换,建立系统等效误差模型,基于反步法设计了预设性能鲁棒控制器,进一步应用Lyapunov稳定性定理证明了其闭环系统的一致最终有界性。最后在MATLAB/Simulink平台上进行了仿真验证,结果表明了方法的有效性。     

电磁航天器编队悬停鲁棒协同控制方法

针对电磁航天器编队近地轨道悬停问题,提出一种在缺少参考轨道准确信息时的协同控制方法。用TH方程描述航天器间的相对运动,选择与参考轨道同周期的圆轨道为标称轨道。将参考轨道相对于标称圆轨道的偏差、地球非球形引力、大气阻力及其他天体引力等参数单独归类,视其为不确定量,构成不确定系统。通过引入一致性理论,在电磁作用模型和动力学方程均存在不确定性的条件下,针对航天器编队悬停的目标设计了鲁棒协同控制律。考虑能量消耗最优和均衡以及轨道姿态解耦,给出了通过优化进行磁矩配置的方案。仿真结果表明,所设计的鲁棒协同控制律能够实现编队电磁航天器高精度悬停,所给出的磁矩配置方案能够实现磁矩的合理分配。      

Automatic orbital docking with tumbling target using sliding mode control

The present study aimed to propose translational and rotational control of a chaser spacecraft in the close vicinity docking phase with a target subjected to external disturbances. For this purpose, two sliding mode controls (SMC) are developed to coordinate the relative position and attitude of two spacecraft. The chaser is guided to the tumbling target by the relative position control, approaching in the direction of the target docking port. At the same moment, the relative attitude control coordinates the chaser attitude so that it can be aligned with the target orientation. These control systems regulate the relative translational and rotational velocities to be zero when two spacecraft are docking. The robustness of the closed-loop system in the presence of external disturbances, measurement noises and uncertainties is guaranteed by analyzing and calculating the control gains via the Lyapunov function. The simulations in different scenarios indicated the effectiveness of the controller scheme and precise maneuver regarding the accuracy of docking conditions.     

Robust fault-tolerant saturated control for spacecraft proximity operations with actuator saturation and faults

In this paper, the motion control problem of autonomous spacecraft rendezvous and docking with a tumbling target in the presence of unknown model parameters, external disturbances, actuator saturation and faults is investigated. Firstly, a nonlinear six degree-of-freedom dynamics model is established to describe the relative motion of the chaser spacecraft with respect to the tumbling target. Subsequently, a robust fault-tolerant saturated control strategy with no precise knowledge of model parameters and external disturbances is proposed by combining the sliding mode control technique with an adaptive methodology. Then, within the Lyapunov framework, it is proved that the designed robust fault-tolerant controller can guarantee the relative position and attitude errors converge into small regions containing the origin. Finally, numerical simulations are performed to demonstrate the effectiveness and robustness of the proposed control strategy.