HW/SW Co-design of the Instrument Control Unit for the Energetic Particle Detector on-board Solar Orbiter

ESA’s medium-class Solar Orbiter mission is conceived to perform a close-up study of our Sun and its inner heliosphere to better understand the behaviour of our star. The mission will provide the clues to discover how the Sun creates and controls the solar wind and thereby affects the environments of all the planets. The spacecraft is equipped with a comprehensive suite of instruments. The Energetic Particle Detector (EPD) is one of the in-situ instruments on-board Solar Orbiter. EPD is composed of five different sensors, all of them sharing the Instrument Control Unit or ICU that is the sole interface with the spacecraft. This paper emphasises on how the hardware/software co-design approach can lead to a decrease in software complexity and highlights the versatility of the toolset that supports the development process. Following a model-driven engineering approach, these tools are capable of generating the high-level code of the software application, as well as of facilitating its configuration control and its deployment on the hardware platforms used in the different stages of the development process. Moreover, the use of the Leon2ViP virtual platform, with fault injection capabilities, allows an early software-before-hardware verification and validation and also a hardware–software co-simulation. The adopted solutions reduce development time without compromising the whole process reliability that is essential to the EPD success.     

Overview of the Solar Polar Orbit Telescope Project for Space Weather Mission

The Solar Polar ORbit Telescope (SPORT) project for space weather mission has been under intensive scientific and engineering background studies since it was incorporated into the Chinese Space Science Strategic Pioneer Project in 2011.SPORT is designed to carry a suite of remote-sensing and in-situ instruments to observe Coronal Mass Ejections (CMEs),energetic particles,solar high-latitude magnetism,and the fast solar wind from a polar orbit around the Sun. The first extended view of the polar regions of the Sun and the ecliptic enabled by SPORT will provide a unique opportunity to study CME propagation through the inner heliosphere,and the solar high-latitude magnetism giving rise to eruptions and the fast solar wind.Coordinated observations between SPORT and other spaceborne/ground-based facilities within the International Living With a Star (ILWS) framework can significantly enhance scientific output.SPORT is now competing for official selection and implementation during China's 13th Five-Year Plan period of 2016-2020.      

基于三体系统平动点轨道的环日全景任务轨道设计

在空间开展太阳观测是研究太阳活动周、太阳爆发、极端天气等事件起源的重要手段。环日全景探测计划是为实现从黄道面360°全方位观察太阳行星际空间而提出的。本文针对环日全景探测计划,构建了基于三体系统平动点低能量轨道的环日全景轨道部署方法。该方法以日–地L1/L2点Halo轨道幅值及Halo轨道离轨点为变量,以转移轨道飞行时间、入轨机动大小为评价指标,基于三体系统不变流形构建环日全景的转移轨道,并开展轨道优化设计。采用等高线图对设计变量及任务成本进行全局分析。仿真计算表明,轨道部署无法同时满足飞行时间最短与入轨机动最小的要求。设计了轨道机动约束条件下的最优飞行时间解,并给出了基于长三甲运载火箭的一箭双星发射及入轨方案。      

Solar orbiter, a high-resolution mission to the sun and inner heliosphere

The scientific rationale of the Solar Orbiter is to provide, at high spatial (35 km pixel size) and temporal resolution, observations of the solar atmosphere and unexplored inner heliosphere. Novel observations will be made in the almost heliosynchronous segments of the orbits at heliocentric distances near 45 R and out of the ecliptic plane at the highest heliographic latitudes of 30° – 38°. The Solar Orbiter will achieve its wide-ranging aims with a suite of sophisticated instruments through an innovative design of the orbit. The first near-Sun interplanetary measurements together with concurrent remote observations of the Sun will permit us to determine and understand, through correlative studies, the characteristics of the solar wind and energetic particles in close linkage with the plasma and radiation conditions in their source regions on the Sun. Over extended periods the Solar Orbiter will deliver the first images of the polar regions and the side of the Sun invisible from the Earth.     

The Living With a Star (LWS) Sentinels

This paper gives a short account of the development of the living with a star Sentinels element. The Sentinels element is the heliospheric portion of the NASA program focused on improving our understanding of geo-effective events in the Sun–Earth connected system. The primary objectives of Sentinels are the investigation of the initiation and evolution of solar transients in the inner heliosphere, the acceleration and propagation of solar energetic particles, and the long term climatic change and structure of the inner heliosphere into which all of these geo-effective structures erupt. Due to the large volume of space to be covered, Sentinels will have to rely on, besides a dedicated mission, the observations of spacecraft from other programs of NASA and international partners along with a robust theoretical and modeling effort. The upcoming Sentinels Science and Technology Definition Team will develop specific details of this element.     

Imaging interplanetary CMEs at radio frequency from solar polar orbit

Coronal mass ejections (CMEs) represent a great concentration of mass and energy input into the lower corona. They have come to be recognized as the major driver of physical conditions change in the Sun–Earth system. Consequently, observations of CMEs are important for understanding and ultimately predicting space weather conditions. This paper discusses a proposed mission, the Solar Polar Orbit Radio Telescope (SPORT) mission, which will observe the propagation of interplanetary CMEs to distances of near 0.35 AU from the Sun. The orbit of SPORT is an elliptical solar polar orbit. The inclination angle between the orbit and ecliptic plane should be about 90°. The main payload on board SPORT will be an imaging radiometer working at the meter wavelength band (radio telescope), which can follow the propagation of interplanetary CMEs. The images that are obtained by the radio telescope embody the brightness temperature of the objectives. Due to the very large size required for the antenna aperture of the radio telescope, we adopt interferometric imaging technology to reduce it. Interferometric imaging technology is based on indirect spatial frequency domain measurements plus Fourier transformation. The SPORT spacecraft will also be equipped with a set of optical and in situ measurement instruments such as a EUV solar telescope, a solar wind ion instrument, an energetic particle detector, a magnetometer, a wave detector and a solar radio burst spectrometer.     

Sun CubE OnE: A multi-wavelength synoptic solar micro satellite

The Sun cubE onE (SEE) is a 12U CubeSat mission proposed for a phase A/B study to the Italian Space Agency that will investigate Gamma and X-ray fluxes and ultraviolet (UV) solar emission to support studies in Sun-Earth interaction and Space Weather from LEO. More in detail, SEE’s primary goals are to measure the flares emission from soft-X to Gamma ray energy range and to monitor the solar activity in the Fraunhofer Mg II doublet at 280 nm, taking advantage of a full disk imager payload. The Gamma and X-ray fluxes will be studied with unprecedented temporal resolution and with a multi-wavelength approach thanks to the combined use of silicon photodiode and silicon photomultiplier (SiPM) -based detectors. The flare spectrum will be explored from the keV to the MeV range of energies by the same payload, and with a cadence up to 10 kHz and with single-photon detection capabilities to unveil the sources of the solar flares. The energy range covers the same bands used by GOES satellites, which are the standard bands for flare magnitude definition. At the same time SiPM detectors combined with scintillators allow to cover the non-thermal bremsstrahlung emission in the gamma energy range. Given its UV imaging capabilities, SEE will be a key space asset to support detailed studies on solar activity, especially in relation to ultraviolet radiation which strongly interacts with the upper layers of the Earth’s atmosphere, and in relation to space safety, included in the field of human space exploration. The main goal for the UV payload is to study the evolution of the solar UV emission in the Mg II band at two different time scales: yearly variations along the solar cycle and transient variations during flare events. The Mg II index is commonly used as a proxy of the solar activity in the Sun-as-a-star paradigm, in which solar irradiance variations in the UV correlate with the variations in stratospheric ozone concentrations and other physical parameters of the Earth high atmosphere. SEE data will be used together with space and ground-based observatories that provide Solar data (e.g. Solar Orbiter, IRIS, GONG, TSST), high energy particle fluxes (e.g. GOES, MAXI, CSES) and geomagnetic data in a multi-instrument/multi-wavelength/multi-messenger approach.     

The interstellar heliopause probe technology reference study

The interstellar heliopause probe (IHP) is one of ESA’s technology reference studies (TRS). The TRS aim to focus the development of strategically important technologies of relevance to future science missions by studying technologically demanding and scientifically interesting missions that are currently not part of the science mission programme.

Equipped with a highly integrated payload suite (HIPS), the IHP will perform in situ exploration of the heliopause and the heliospheric interface. The HIPS, which is a standard element in all TRSs, miniaturize payloads through resource reduction by using miniaturized components and sensors, and by sharing common structures and payload functionality.

To achieve the scientific requirements of the mission, the spacecraft is to leave the heliosphere as close to the heliosphere nose as possible and reach a distance of 200 AU from the Sun within 25 years. This is possible by using a trajectory with two solar flybys and a solar sail with characteristic acceleration of 1.1 mm/s², which corresponds to a 245 × 245 m² solar sail and a sail thickness of 1–2 μm. The trajectory facilitates a modest sail design that could potentially be developed in a reasonable timeframe.

In this paper, an update to the results of studies being performed on this mission will be given and the current mission baseline and spacecraft design will be described. Furthermore, alternative solar sail systems and enabling technologies will be discussed.     

Russian payload for “interhelioprobe” (“interhelios”) mission

The solar and heliospheric instruments proposed to study the solar atmosphere at close distances and the inner heliosphere onboard the Interhelioprobe mission are described. Remote observations of the solar surface combined with in-situ measurements at optimum orbital parameters (quasi-corotation with the Sun, multiple positions with respect to the Sun-Earth line, and inclination to the ecliptic plane) provide new information on the fine structure and dynamics of the solar surface, solar flares and ejections, solar corona, and solar wind.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

Coronal spectroscopy: Probing sources of slow solar wind in active regions,and the early phases of solar flares

Coronal spectroscopy has pushed forward the understanding of physical processes in all phenomena on the Sun. In this review we concentrate specifically on plasma parameters measured in sources of the slow solar wind in active regions and the early phases of solar flares. These topics are a key part of the science goals of the Solar Orbiter mission (Müller et al., 2020) which has been designed to probe what drives the solar wind and solar transients that fill the heliosphere.Active regions, outside of flaring, have general characteristics that include closed loops showing red-shifted (down-flowing plasma), and the edges of the active regions showing blue-shifted (upflowing plasma). Constraining and understanding the evolution, behaviour and cause of the flows has been developed in the past years and are summarised. Of particular importance is the upflowing plasma which, in some cases, can contribute to the slow solar wind, and this review concentrates on recent results on this topic.The early phases of solar flares and their energy sources are not yet fully understood. For decades, there has been a huge interest in pin-pointing the trigger of a solar flare. Coronal spectroscopy has revealed small-scale dynamics that occurs tens of minutes before the flare begins. The understanding of the trigger is key to improving flare predictions in the future, as well as understanding the physical processes.Finally we look to the future of coronal spectroscopy, with new instruments and methodologies being developed that build on the current knowledge, and will improve significantly our physical understanding of processes at all scales on the Sun.     

The solar orbiter mission

Approved in October 2000 by ESA's Science Programme Committee as a flexi-mission, the Solar Orbiter will studythe Sun and unexplored regions of the inner heliosphere from a unique orbit that brings the probe to within 45 solar radii (0.21 AU) of our star, and to solar latitudes as high as 38°. This orbit will allow the Solar Orbiter to make fundamental contributions to our understanding of the acceleration and propagation of energetic particles in the extended solar atmosphere. During quasi-heliosynchronous phases of the orbit, Solar Orbiter will track a given region of the solar surface for several days, making possible unprecedented studies of the sources of impulsive and CME-related particle events. The scientific payload to be carried by the probe will include a sophisticated remote-sensing package, as well as state-of-the-art in-situ instruments. The multi-wavelength, multi-disciplinary approach of Solar Orbiter, combined with its novel location, represents a powerful tool for studies of energetic particle phenomena.     

Sun earth connection coronal and heliospheric investigation (SECCHI)

The Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) on the NASA Solar Terrestrial Relations Observatory (STEREO) mission is a suite of remote sensing instruments consisting of an extreme ultraviolet imager, two white light coronagraphs, and a heliospheric imager. Two spacecraft with identical instrumentation will obtain simultaneous observations from viewpoints of increasing separation in the ecliptic plane. In support of the STEREO mission objectives, SECCHI will observe coronal mass ejections from their birth at the Sun, through the outer corona, to their impact at Earth. The SECCHI program includes a coordinated effort to develope magneto-hydrodynamic models and visualization tools to interpret the images that will be obtained from the two spacecraft viewpoints. The resulting three-dimensional analysis of CMEs will help to resolve some of the fundamental outstanding questions in solar physics.     

The L5 mission for space weather forecasting

We have studied a number of interplanetary space mission scenarios for space weather research and operational forecasting experiments and concluded that a spacecraft should be deployed at the L5 point of the Sun–Earth system to enable remote sensing of the Sun and interplanetary space and in situ measurements of solar wind plasma and high energy solar particle events. The L5 point is an appropriate position for making side-view observations of geo-effective coronal mass ejections and interplanetary plasma clouds.Here, we describe briefly the mission plan and the ongoing BBM development of important subsystems such as the wide field coronal imager (WCI) and the mission processor. The WCI will have a large CCD array with 16-bit sampling, to achieve a dynamic range of several thousand in order to detect very small deviations due to plasma clouds under zodiacal light contaminations a hundred times brighter than the clouds. The L5 mission we propose will surely contribute to the construction of an international space weather observation network.     

A new modeling method of solar energetic proton events for ISO specification

Solar energetic protons degrade performance and reliability of spacecraft systems due to single-event effects, total dose effects and displacement damage in electronics components including solar cells. On designing a solar cell panel, a total fluence of solar energetic protons (SEPs) which cause solar cell damage is needed to estimate power loss of the solar cells over mission life. Nowadays a solar panel area of spacecraft is increasing as spacecraft mission life becomes longer (15–18 years). Thus an accurate SEP model is strongly required for the cost-minimum design from the aerospace industry. The SEP model, JPL-91 proposed by Feynman et al., is currently used widely for solar cell designing. However, it is known that the JPL-91 model predicts higher fluences of protons than values actually experienced in space, especially after 7 years on orbit. In addition, the model is based on several assumptions, and also needs Monte-Carlo simulations for calculating fluences. In this study, we propose a new method for modeling SEPs especially focused on solar cell degradation. The newly-proposed method is empirical, which constructs a model based directly upon proton flux measurement data taken by instruments onboard spacecraft. This method has neither assumptions nor dependence on SEP event selection, both of which are needed in JPL-91. The model fluences derived from this method show lower fluences in longer missions compared to JPL-91. This method has been proposed to ISO (International Organization for Standardization) and has been discussed for a new standard SEP model.     

Influence of Fast Global Variations of Solar Magnetic Fields on Space Weather in Cycle 23

It is established that the large-scale and global magnetic fields in the Sun's atmosphere do not change smoothly, and long-lasting periods of gradual variations are superseded by fast structural changes of the global magnetic field. Periods of fast global changes on the Sun are accompanied by anomalous manifestations in the interplanetary space and in the geomagnetic field. There is a regular recurrence of these periods in each cycle of solar activity, and the periods are characterized by enhanced flaring activity that reflects fast changes in magnetic structures. Is demonstrated, that the fast changes have essential influencing on a condition of space weather, as most strong geophysical disturbances are connected to sporadic phenomena on the Sun. An explanation has been offered for the origin of anomalous geomagnetic disturbances that are unidentifiable in traditionally used solar activity indices. Is shown, main physical mechanism that leads to fast variations of the magnetic fields in the Sun's atmosphere is the reconnection process.     

The coronal dynamics imagers for the KuaFu mission

The Space Weather Explorer – KuaFu mission will provide simultaneous, long-term, and synoptic observations of the complete chain of disturbances from the solar atmosphere to the geospace. KuaFu-A (located at the L1 liberation point) includes Coronal Dynamics Imagers composed of a Lyman-α coronagraph (from 1.15 to 2.7 solar radii) and a white light coronagraph (out to 15 solar radii), in order to identify the initial sources of Coronal Mass Ejections (CMEs) and their acceleration profiles. The difficulty of observing the lower corona should not be underestimated since instrumental stray light remains a critical issue in the visible because of the low contrast of the corona with respect to the Sun. Observing the corona in the Lyman-α line is a valid alternative to white light observations. This approach takes advantage of both the intrinsic higher contrast of the corona with respect to the solar disk in this line compared to the visible, and the absence of F-corona at 121.6 nm. Furthermore, it has been convincingly shown that the coronal structures seen in Lyman-α correspond to those seen in the visible and which result from Thomson scattering of the coronal ionized gas. This is because the plasma is still collisional in the lower corona so that the hydrogen neutral atoms are coupled to the protons. A classical, all-reflecting internally-occulted Lyot coronagraph is required so as to preserve the image quality down to the inner limit of the field-of-view. A narrow band interference filter located in a collimated beam allows isolating the Lyman-α line. The visible coronagraph will adopt the approach of a single instrument having a large field-of-view extending from 2.5 to 15 solar radii. Such a design is based on refractive externally-occulted coronagraphs built for recent past missions, essentially the LASCO-C2 and C3 instruments and the SECCHI/COR 2 of the STEREO mission, which is itself a combination of the C2 and C3 instruments.     

Distributing space weather monitoring instruments and educational materials worldwide for IHY 2007: The AWESOME and SID project

The International Heliophysical Year (IHY) aims to advance our understanding of the fundamental processes that govern the Sun, Earth, and heliosphere. The IHY Education and Outreach Program is dedicated to inspiring the next generation of space and Earth scientists as well as spreading the knowledge, beauty, and relevance of our solar system to the people of the world. In our Space Weather Monitor project we deploy a global network of sensors to high schools and universities to provide quantitative diagnostics of solar-induced ionospheric disturbances, thunderstorm intensity, and magnetospheric activity. We bring real scientific instruments and data in a cost-effective way to students throughout the world. Instruments meet the objectives of being sensitive enough to produce research-quality data, yet inexpensive enough for placement in high schools and universities. The instruments and data have been shown to be appropriate to, and usable by, high school age and early university students. Data contributed to the Stanford data center is openly shared and partnerships between groups in different nations develop naturally. Students and teachers have direct access to scientific expertise.     

Science objectives of the magnetic field experiment onboard Aditya-L1 spacecraft

The Aditya-L1 is first Indian solar mission scheduled to be placed in a halo orbit around the first Lagrangian point (L1) of Sun-Earth system in the year 2018–19. The approved scientific payloads onboard Aditya-L1 spacecraft includes a Fluxgate Digital Magnetometer (FGM) to measure the local magnetic field which is necessary to supplement the outcome of other scientific experiments onboard. The in-situ vector magnetic field data at L1 is essential for better understanding of the data provided by the particle and plasma analysis experiments, onboard Aditya-L1 mission. Also, the dynamics of Coronal Mass Ejections (CMEs) can be better understood with the help of in-situ magnetic field data at the L1 point region. This data will also serve as crucial input for the short lead-time space weather forecasting models.The proposed FGM is a dual range magnetic sensor on a 6?m long boom mounted on the Sun viewing panel deck and configured to deploy along the negative roll direction of the spacecraft. Two sets of sensors (tri-axial each) are proposed to be mounted, one at the tip of boom (6?m from the spacecraft) and other, midway (3?m from the spacecraft). The main science objective of this experiment is to measure the magnitude and nature of the interplanetary magnetic field (IMF) locally and to study the disturbed magnetic conditions and extreme solar events by detecting the CME from Sun as a transient event. The proposed secondary science objectives are to study the impact of interplanetary structures and shock solar wind interaction on geo-space environment and to detect low frequency plasma waves emanating from the solar corona at L1 point. This will provide a better understanding on how the Sun affects interplanetary space.In this paper, we shall give the main scientific objectives of the magnetic field experiment and brief technical details of the FGM onboard Aditya-1 spacecraft.