空-地攻击作战效能评估的综合指数模型

 详细分析了作战飞机空-地作战效能评估中常用的对数法模型,指出了模型中存在的问题,并结合作战理论和实战情况,针对原模型存在的问题提出了一种新的空-地攻击作战效能评估解析计算方法——综合指数模型,并对综合指数中各分项能力的评估模型进行了修改完善。最后以8种机型的空-地攻击作战效能评估为例计算并检验了模型的可用性。     

基于仿真的空战效能评估分析研究

分析了作战飞机在执行空战任务过程中的使用特点,结合现代空战的特点、考虑四代机的特征及作战飞机各系统间的耦合情况,应用概率理论建立了作战飞机空战效能的计算评估体系,同时给出了发现目标概率、占位开火成功概率、导弹杀伤目标概率3个用于评估空战效能的阶段性指标.根据空战各阶段的特点,应用效能计算评估体系辅以模拟仿真的方法完成了空战效能的评估.结果表明,空战效能评估结果与空战能力评估结果吻合情况很好.     

作战飞机对地攻击效能研究分析

根据现代空地作战过程所体现的动态性,提出了作战飞机对地攻击效能评估的方法.以ADC法为基础,结合指数法、层次分析法,利用影响对地攻击的指标量,对对地攻击过程进行了建模与分析.在建模过程中,充分考虑了影响效能的因素,把指标分层并建立系统评估的框架模型.对基于模糊数学综合评判和层次分析方法理论作了有效结合,最后通过算例分析,证明该方法的有效性.     

现代作战飞机方案评估与决策系统的设计与实现

作战飞机方案的评估,是现代军事和作战问题研究的重要组成部分,也是飞机改进改型和方案优选的重要依据。根据确立的现代作战飞机方案评估的五个层次及相应的计算方法,采用VisualC＋＋的MFC模块设计并开发了一种通用的作战飞机方案评估和决策系统。该系统综合了解析评估法、专家评估法和计算机仿真等多种方法,能够进行飞机综合作战能力、综合作战效能、综合使用效能、综合使用效费和方案评估决策五个层次的量化评估,并可以提供数据文件和可视化图形两种结果形式。采用该系统对多个飞机方案进行评估,结果表明：该系统功能齐全、操作简便、易于通用和拓展,能够提高了飞机方案评估的效率、科学性和综合性,对现代作战飞机及其他武器系统的方案评估和优选提供参考价值。     

机动性/敏捷性参数对超视距空战效能的影响

分析了超视距相关的机动性和敏捷性要求。根据已经建立的仿真平台,以两架典型三代战斗机为对抗双方,借助矩阵博弈的决策模型进行了一对一空战仿真。在此基础上,调整有关飞机机动性和敏捷性参数,利用所得作战结果评估飞机的作战效能,并分析了相关参数对作战飞机设计的影响。仿真结果再现了红蓝双方由超视距空战到视距内空战的整个作战过程,结果对飞机参数设计具有一定的参考意义。     

战机作战效能的综合指数评估研究

基于信息化条件下的现代作战需求,分析了影响战机作战效能综合评价的主要指标因素,包括直接攻击指标因素和各种保障指标因素,在一般指数法的基础上建立了战机作战效能的综合指数评价模型框架,并用该方法对国外部分主战战机作战效能开展了评估研究。     

基于AHP的DS/FH混合扩频测控系统抗干扰效能评价

针对DS/FH(Direct Sequence/Frequency Hopping,直扩/跳频)混合扩频测控系统抗干扰问题,提出一种效能评价方法.基于任务需求,构建系统抗干扰效能评估指标体系;将三角模糊数、指数标度和层次分析法相结合,提出一种改进的TFN-AHP(Triangular Fuzzy Number-Analytic Hierarchy Process,三角模糊数-层次分析法),提高了较小指标的区分度,剔除了极端数据,最大限度发挥专家的经验知识,实现了指标赋权的客观程度,最后通过AHP对不同设备系统关于指标体系判断矩阵的确定、一致性检验和层次总排序,实现了系统抗干扰效能的评价和选择.分析结果表明,该评价方法能够实现不同设备的抗干扰效能评估,有助于用户对设备的选择.     

攻击机机群多步骤对地攻击模拟数学模型

以平均动态学理论为基础,研究讨论了攻击机机群在整个战斗飞行过程中作战效能评估的基本原理,建立了战效评估的顶层分析数学模型,导出了效能指标与对地攻击靶场效能指标、国土防空系统突防效能指标及要地防空系统突防效能指标间的关系式,给出了完成作战任务集所需飞机架数、被击毁的总架数,总战斗飞行架次数以及武器总消耗量等的计算式,为评价攻击机机群在整个战斗飞行过程中的作战效能奠定了理论基础。     

基于分层体系的现代作战飞机方案评估

针对目前作战飞机方案评估中体系与方法的不足,依据飞机发展的时序性和评估内容的细化程度,确定了现代作战飞机方案评估的5个层次,它们分别为综合作战能力层、综合作战效能层、综合使用效能层、综合使用效费层和方案评价决策层.在分析各评估层特性的基础上,建立了各评估层的细化指标体系,改进和完善了各评估层的理论模型和计算方法,通过现...     

基于作战效能评估的交叉眼干扰设备在飞机上的布局

针对电子干扰设备多样化的现状,以交叉眼干扰设备为例,从作战效能评估的角度进行分析,提出了交叉眼干扰设备的机上布局方案及作战效能提升的要求,并对交叉眼干扰设备在飞机上的应用进行了优化,为作战飞机电子干扰设备机上选型及布局提供技术参考。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.