Low cost Doppler ratio detection radar with interclutter visibility

A low cost concept, called Doppler ratio detection (DRD), for suppressing the clutter residue of Doppler radars is described. The concept provides a simple way to establish a target detect-clutter reject threshold at each range cell, whether a MTI canceler only or a bank of Doppler filters is used. In its simplest form, the target detect/clutter reject threshold is based on the ratio of the magnitudes of Doppler-processed and non-Doppler processed signals. The experiment showed that clutter was rejected, but the amount of added degradation in detection sensitivity was not determined. This degradation will depend on a number of factors, including the number of pulses per beamwidth     

Optimum Processing of Unequally Spaced Radar Pulse Trains for Clutter Rejection

A train of radar pulses from one resolution cell can be processed coherently to reject echoes from external clutter and detect targets moving radially with respect to the clutter. Optimum methods of signal processing are defined for systems in which the interpulse spacings are multiply staggered to avoid target blind speeds. Likelihood ratio tests are developed for systems in which the target Doppler frequency is known a priori and for systems employing a bank of filters to cover the target Doppler band. To implement such tests, the N pulses in the train are added with complex weights and the amplitude of the sum compared with a detection threshold. The set of weights which maximizes the average signal-to-clutter ratio is also computed for a single-filter system with unknown target Doppler frequency. When the clutter autocorrelation function is exponential, the clutter covariance matrix can be inverted analytically. This latter result is useful for comparing different interpulse-spacing codes for a particular system application.     

A Quantitative Analysis of Sea Clutter Decorrelation with Frequency Agility

A brief statement of the sea clutter problem in surface-search radar operation illustrates the need for some form of signal-to-clutter enhancement. Post-detection integration used in the simpler radars is limited by the pulse-to-pulse correlation of the clutter. Analysis of the effect of changing frequency from pulse to pulse leads to an expression for the correlation between pulses in the sequence. Knowing this correlation, the reduction in the fluctuating clutter component produced by integration can be determined. This is described by an equivalent number of independent pulses, Nc. For the particular case of sinusoidal modulation of the transmitted frequency, N6 is computed. The critical dependecne of Nc upon the modulating frequency fm is illustrated by spectrum photographs. Choice of an optimum fm is discussed. The results of computations of N4 for optimum fm are presented as a family of normalized curves. These data permit the tradeoff of the radar parameters against their quantitative effect on radar performance.     

The effect of the clutter-to-noise ratio on Doppler filterperformance

The effect of the clutter-to-noise ratio on the performance of a Doppler filter is considered. Clutter is assumed to have a power level which is unknown and varies in range. The assessment of the performance of a Doppler filter is based on the gain of the filter, which is the normalized output signal-to-interference ratio improvement at a given Doppler. The gain is generally a complex function of the statistics of the clutter. New upper and lower bounds on the gain differential between the expected design point clutter-to-noise ratio and the actual clutter-to-noise ratio are found. These bounds are independent of the clutter covariance matrix and are only a function of the unknown clutter-to-noise ratio. The bounds are valid for both Gaussian and non-Gaussian noise and for arbitrary linear filters. The upper and lower bounds differ by the theoretical coherent integration gain, 10 logN dB, where N is the number of pulses. A tighter lower bound is found for the case when the filters are matched filters. A simple exact expression is found for matched filters assuming a Gaussian Markov clutter model as the clutter spectral width approaches zero. An easily implementable adaptive procedure is given which improves performance due to the unknown clutter-to-noise ratio. This work extends a previous result, valid for the Emerson filter, that shows the effect of clutter-to-noise ratio on performance in terms of an average quantity, the improvement factor     

An effect of range-heterogeneous clutter on adaptive Dopplerfilters

The practical implementation of adaptive Doppler filters requires estimates of clutter parameters to determine the adaptive weights. A method of deriving the estimate via the sample matrix inversion (SMI) algorithm using multiple data snapshots from adjacent range cells is presented. For homogeneous clutter environments, the results of this technique asymptotically approach the optimum (a priori known covariance matrix) as the number of snapshots approaches infinity; this asymptotic behavior does not occur for heterogeneous clutter environments. An equation for the decrease in improvement factor is derived. To promote understanding, the simplified special case of narrowband clutter is considered in detail. In almost all cases, the loss is small     

A Clutter Reduction Technique for Random Signal Radars

The performance of certain radars is degraded in environments with significant clutter returns, and since the clutter is signal-generated, increasing the transmitted power does not improve the situation. However, changing the pulse width and pulse period of the transmitted signal can increase the input signal-to-interference ratio. In this correspondence, the transmitted signal is made up of pulses of random waveforms and the receiver is a correlator where the reference signal extends over many pulses. An expression for input signal-to-interference ratio as a function of pulse width and period is obtained for the case of a distributed target. This expression could be maximized by any of several methods, but to further elucidate the clutter reduction technique, contour plots of the input signal-to-interference ratio are presented.     

Frequency Agility Radar Range Calculation Using Number of Independent Pulses

A method for accurately calculating the radar range improvement introduced by frequency agility is presented. This calculation is made by using the concept of independent pulses. The number of independent target or clutter pulses is calculated by a simple method based on such basic combinatorial probability theory as drawing differently colored balls from an urn.     

Structures for radar detection in compound Gaussian clutter

The problem of coherent radar target detection in a background of non-Gaussian clutter modeled by a compound Gaussian distribution is studied here. We show how the likelihood ratio may be recast into an estimator-correlator form that shows that an essential feature of the optimal detector is to compute an optimum estimate of the reciprocal of the unknown random local power level. We then proceed to show that the optimal detector may be recast into yet another form, namely a matched filter compared with a data-dependent threshold. With these reformulations of the optimal detector, the problem of obtaining suboptimal detectors may be systematically studied by either approximating the likelihood ratio directly, utilizing a suboptimal estimate in the estimator-correlator structure or utilizing a suboptimal function to model the data-dependent threshold in the matched filter interpretation. Each of these approaches is studied to obtain suboptimal detectors. The results indicate that for processing small numbers of pulses, a suboptimal detector that utilizes information about the nature of the non-Gaussian clutter can be implemented to obtain quasi-optimal performance. As the number of pulses to be processed increases, a suboptimal detector that does not require information about the specific nature of the non-Gaussian clutter may be implemented to obtain quasi-optimal performance     

Frequency-Agile Radar Signal Processing

Modern radars may incorporate pulse-to-pulse carrier frequency modulation to increase probability of detection, to reduce Vulnerability to jamming, and to reduce probability of interception. However, if coherent processing is used for clutter rejection, the frequency of N consecutive pulses must be held constant for N-pulse clutter cancellation or Doppler filtering. If M pulses are transmitted during the time the antenna illuminates a target, there are M/N coherently integrated echoes available for noncoherent integration in the computer or the operator's display to further improve the signal-to-noise ratio (SNR). In this paper, analytical and simulation methods are employed to determine the balance between coherent and noncoherent integration that yields the greatest SNR improvement. Attention is focused upon a model using peak selection of fast Fourier transform (FFT) Doppler channels and is compared to a reference model involving only a single Doppler channel. Curves of detectable SNR as a function of M and N are presented for both models.     

Adaptive cancellation method for geometry-induced nonstationary bistatic clutter environments

This paper describes and characterizes a new bistatic space-time adaptive processing (STAP) clutter mitigation method. The approach involves estimating and compensating aspects of the spatially varying bistatic clutter response in both angle and Doppler prior to adaptive clutter suppression. An important feature of the proposed method is its ability to extract requisite implementation information from the data itself, rather than rely on ancillary - and possibly erroneous or missing - system measurements. We justify the essence of the proposed method by showing its ability to align the dominant clutter subspaces of each range realization relative to a suitably chosen reference point as a means of homogenizing the space-time data set. Moreover, we numerically characterize performance using synthetic bistatic clutter data. For the examples considered herein, the proposed bistatic STAP method leads to maximum performance improvements between 17.25 dB and 20.75 dB relative to traditional STAP application, with average improvements of 6 dB to 10 dB.     

Improved Range Resolution Filters for Rectangular-Pulse Radar Systems

The performance of several new clutter-reduction filters suitable for rectangular-pulse radar systems is investigated. The new filters consist of various approximations and modifications of two filters known to be optimal for certain criteria: the well-known Urkowitz filter which optiizes the clutter improvement ratio, and the newer sidelobe reduction filter which minimizes output noise power subject to peak sidelobe constaints. The new filters are compared usig five basic criteria: clutter improvement ratio, signal-to-noise ratio, sidelobe peak ratio, pulse compression ratio, and filter complexity. The results are summarized in tabular and graphical form.     

Low-altitude target detection by coastline operated marine radar

Relevant to a Richian family of fluctuating targets with a composite background of sea-plus-land clutter, the performance prediction of a radar operating in near-coastal regions is elucidated by assuming noncoherent integration of the pulses. Considering the dominance of land clutter, a modified K-distributed statistic is indicated for the overall clutter envelope; and the corresponding probability of false alarm and probability of detection are deduced for fixed threshold detection (s) based on N pulses integrated in the presence of the sea-plus-land clutter and the noise. Even when the target offers a dominant scattered echo, the worst situations of the land clutter affecting the detection performance are indicated     

Filtering of moving targets using SBIR sequential frames

In this paper three-dimensional (3-D) finite-impulse response (FIR) filters are proposed for moving target detection and tracking from multiframe space-based infrared (SBIR) data. An optimal, in the l_p sense, 3-D FIR filter design technique is proposed which is suitable for the above application. This technique is the first 3-D FIR design of its kind presented in the open literature. Directional, matched, and adaptive 3-D filtering techniques are proposed. Prior to the filtering, clutter mean estimation and mean subtraction are required. Real time implementation of directional and/or matched filters for processing maneuvering targets is discussed and filter design methods are proposed. Finally, performance comparisons of the proposed and other available 3-D FIR and infinite-impulse response (IIR) filters, on real SBIR data, are presented in which the advantages of the proposed 3-D filters are shown     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

Adaptive Rectification Filter for Detecting Small IR Targets

Clutter suppression is one of the most important subjects in the field of small target detection under infrared (IR) strong clutter background. While removing the clutter background, however, such methods may reverse the relative energy distribution of target and noise in the clutter suppressed image, and disturb the subsequent target segmentation and detection. This paper analyzes the causation of such problems, does research on the relationship between target energy characteristics and detection probability, and presents a novel filter of energy distribution adaptive rectification (EDARF). Based on the EDARF, an improved framework of dim small target detection is proposed to rectify the energy distribution in the clutter-suppressed images by conventional adaptive filters. The proposed EDARF's performance is estimated by experimental comparisons of three linear/nonlinear filters before and after using EDARF. Extensive experimental results show that the proposed EDARF improves efficiently the performance of detecting dim small targets against strong undulant cloud-cluttered backgrounds.     

Radar Detection of Correlated Targets in Clutter

This paper provides general models of radar echoes from a target. The rationale of the approach is to consider the echoes as the output of a linear dynamic system driven by white Gaussian noise (WGN). Two models can be conceived to generate N target returns: samples generated as a batch, or sequentially generated one by one. The models allow the accommodation of any correlation between pulses and nonstationary behavior of the target. The problem of deriving the optimum receiver structure is next considered. The theory of "estimator-correlator" receiver is applied to the case of a Gaussian-distributed time-correlated target embedded in clutter and thermal noise. Two equivalent detection schemes are obtained (i. e., the batch detector and the recursive detector) which are related to the above mentioned procedures of generating radar echoes. A combined analytic-numeric method has been conceived to obtain a set of original detection curves related to operational cases of interest. Finally, an adaptive implementation of the proposed processor is suggested, especially with reference to the problem of on-line estimation of the clutter covariance matrix and of the CFAR threshold. In both cases detection loss due to adaptation has been evaluated by means of a Monte Carlo simulation approach. In summary, the original contributions of the paper lie in the mathematical formulation of a powerful model for radar echoes and in the derivation of a large set of detection curves.     

Suboptimal Simulation and Suppression of Clutter Signals

Two digital filters are presented, which are suited for generating (Correlation) or suppressing (decorrelation) by approximation time-discrete signals with preset autocorrelation function from white noise. The advantage of these suboptimal filters is that the determination of their coefficients is very simple. For this reason the filters are weil suited for generating or suppresing signals with rapidly varying statistical parameters. One application possibility is the simulation and the adaptive suppression of clutter signals in surveillance radar systems.     

Clutter Suppression by Complex Weighting of Coherent Pulse Trains

Uniform coherent pulse trains offer a practical solution to the problem of designing a radar signal possessing both high range and range-rate resolution. The Doppler sensitivity provides some rejection of off-Doppler (clutter) returns in the matched filter receiver. This paper considers the use of a processor in which members of the received pulse train are selectively weighted in amplitude and phase to improve clutter suppression. The techniques described are particularly suitable for rejecting interference entering the processor through ambiguous responses (range sidelobes) of the signal. The complex weights which are derived are optimum in the sense that they produce the maximum clutter suppression for a given detection efficiency. In determining these weights, it is assumed that the distribution of clutter in range and range rate relative to targets of interest is known. Thus, clutter suppression is achieved by reducing the sidelobe levels in specified regions of the receiver response. These techniques are directly applicable to array antennas; the analogous antenna problem would be to reduce sidelobe levels in a particular sector while preserving gain. Complex weighting is most successful when the clutter is limited in both range and velocity.     

Nonparametric rank detectors under K-distributed clutter in radar applications

This correspondence deals with a comparative analysis of parametric detectors versus rank ones for radar applications, under K-distributed clutter and nonfluctuating and Swerling II target models. We show that the locally optimum detectors (LODs) (optimum for very low signal-to-clutter ratio (SCR)) under K-distributed clutter are not practical detectors; on the contrary, asymptotically optimum detectors (optimum for high SCR) are the practical ones. The performance analysis of the parametric log-detector and the nonparametric (linear rank) detector is carried out for independent and identically distributed (IID) clutter samples, correlated clutter samples, and nonhomogeneous clutter samples. Some results of Monte Carlo simulations for detection probability (P/sub d/) versus SCR are presented in curves for different detector parameter values.     

An Algorithm for Designing Burst Waveforms with Quantized Transmitter Weights

An algorithm is described which finds optimum transmitter and receiver weights to maximize clutter suppression in a predetermined clutter region when using burst waveforms. It is assumed that the transmitter weights can only take on values from a finite set. This optimization problem is solved using a branch and bound algorithm. An example is given which shows the improvement in clutter suppression when this new design procedure is used as compared to a simpler nonoptimal procedure.