充液卫星平放式贮箱内液体晃动的等效力学模型

本文研究带平放式贮箱的三轴定向充液卫星的液体晃动及其姿态动力学问题，建立了充液系统的等效力学模型，并由该模型研究了充液卫星的姿态稳定性，得到了主刚体作平面摆动时系统的姿态稳定性判据     

航天器两自由度扫描镜图像运动补偿技术研究

研究航天器的两自由度扫描镜图像运动补偿问题。在姿态估计信息的基础上,给出了一种运动补偿算法。算法中不仅补偿了姿态估计信息,还同时考虑了姿态信息中的长周期系统误差。利用扫描镜在特定工作模式下相对惯性空间的准确定向能力和系统误差的长周期特性,给出了一种系统误差的估计和补偿算法,每隔一定的时间段对系统误差估计值进行更新并加以补偿,进一步提高了扫描精度。基于一颗地球静止轨道卫星的数值仿真结果验证了补偿算法的有效性。     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

电分离连接器对小卫星星箭分离干扰分析

电分离连接器是否成功分离是卫星与火箭分离过程中一个重要的环节。文章以某小卫星为工程背景,根据电分离连接器具有电分离（正常）和机械分离（非正常）两种工作模式,给出了小卫星在正常分离模式和非正常分离模式下的分离时序,建立了两种分离模式下的分离力学模型,开展了电分离连接器分离的仿真分析。结果表明:正常分离模式下,分离不存在干扰;非正常分离模式下存在少许分离干扰,但卫星可以实现安全分离。     

Variable structure control for satellite attitude stabilization in elliptic orbits using solar radiation pressure

The paper proposes the use of solar radiation pressure for satellite attitude control in elliptic orbits based on variable structure control. The system comprises of a satellite with two-oppositely placed solar flaps. Sliding mode control and terminal sliding mode control techniques have been adopted to develop nonlinear control laws for suitably rotating the control solar flaps to neutralize the adverse effect of eccentricity normally responsible for a considerable deterioration in the attitude control performance. The detailed numerical simulation of the governing nonlinear equation of the motion including the effects of various system parameters on the controller performance, establishes the feasibility of the proposed control strategy. The proposed controller is found to be robust against parameter uncertainties and external disturbances and thereby, the control strategy presented in the paper may be applicable to future satellite missions.     

卫星正常模式姿态确定算法研究

针对太阳同步极轨卫星进行了正常模式姿态确定算法研究 ,采用四元数法建立了较完整和准确的姿态估计器模型 ,并进行了可观测性及观测度的分析。通过数学仿真证明此姿态确定算法能够对星体姿态进行较精确的估计或校正 ,满足卫星控制精度要求     

The results of flight tests of an attitude control system for the Chibis-M microsatellite

The attitude control system of the Chibis-M microsatellite is described. Results of flight experiments on damping the initial angular velocity (made using magnetorquers) are considered, as well as stabilization in the orbital referece frame, and orientation of solar arrays toward the Sun using reaction wheels. The operation of algorithms of satellite attitude determination on sunlit and shadow segments of the orbit is also under study. The general logic of operation of the attitude control system in automatic mode is presented and discussed.     

反作用飞轮速率模式控制系统设计

反作用飞轮是卫星姿态控制系统的重要执行元件，速率模式是反作用飞轮一种工作模式，提高飞轮速率模式控制系统的性能对卫星姿态控制系统具有重要意义。详细讨论了反作用飞轮系统的数学模型，在此基础上实现了反作用飞轮速率模式控制系统设计。实验飞轮运行结果表明，设计的反作用飞轮速率模式控制系统能够抑制飞轮内部干扰和噪声，精确复现速率指令。灵敏度分析证明飞轮系统具有较好的鲁棒性。     

A study of evolution of spin-up mode of a satellite in the plane of its orbit

We investigate the mode of spinning up a low-orbit satellite in the plane of its orbit. In this mode the satellite rotates around its principal central axis of the minimum moment of inertia which executes small oscillations with respect to the normal to the orbit plane; the angular velocity of the rotation around this axis several times exceeds the mean orbital motion. Gravitational and restoring aerodynamic moments are taken into account in the satellite’s equations of motion. A small parameter characterizing deviation of the satellite from a dynamically symmetric shape is introduced into the equations. A two-dimensional integral surface of the equations of motion, describing quasi-steady-state rotations of the satellite close to cylindrical precession of the corresponding symmetrical satellite in a gravitational field, has been studied by the method of small parameter and numerically. Such quasi-steady-state rotations are suggested to be considered as unperturbed motions of the satellite in the spin-up mode. Investigation of the integral surface is reduced to numerical solution of a periodic boundary value problem of a certain auxiliary system of differential equations and to calculation of quasi-steady-state rotations by the two-cycle method. A possibility is demonstrated to construct quasi-steady rotations by way of minimization of a special quadratic functional.     

Modal control of the planar motion of a long flexible beam in orbit

Attitude control techniques for the pointing and stabilization of very large, inherently flexible spacecraft systems are investigated. The attitude dynamics and control of a long, homogeneous flexible beam whose center of mass is assumed to follow a circular orbit is analyzed. In this study, first order effects of gravity-gradient are included, whereas external perturbations and related orbital station keeping maneuvers are neglected. A mathematical model which describes the system deflections within the orbital plane has been developed by treating the beam as having a maximum of three discretized mass particles connected by massless, elastic structural elements. The uncontrolled dynamics of this system are simulated and, in addition, the effects of the control devices are considered. The concept of distributed modal control, which provides a means for controlling a system mode independently of all other modes, is examined. The effect of varying the number of modes in the model as well as the number and location of the control devices are also considered.     

Attitude stabilization of a satellite by magnetic coils

Stabilization problem for a satellite is considered. The only measurement is of the geomagnetic field in the satellite coordinates. The control is carried out by a magnetic moment of current coils (magnetorquers) mounted on the satellite body. The stabilizer constructed in this work solves the problems of magnetic and gravitational stabilization. Qualitative analysis and results of numerical simulation are presented. The results of simulation show that the proposed stabilization system is reliable, and has an appropriate accuracy and does not need powerful sources of energy, and therefore can be used for attitude control of small satellites.     

具有SGCMG系统的挠性卫星姿态机动控制及验证

针对挠性卫星在轨姿态快速机动的需求，开展了星体姿态机动控制方法及控制实现研究。基于建立的挠性卫星姿态跟踪控制误差方程，给出了PD控制与补偿控制相结合的姿态跟踪控制器形式；考虑系统实现的时延影响，利用经典频率分析方法选择了兼顾系统稳定性及宽带控制的控制参数；在控制具体实现中，采用一种新型的基于力矩矢量调节奇异规避操纵策略，克服常规鲁棒奇异规避操纵存在的框架“锁死”现象，在解决奇异规避的同时避免激发挠性振动。所提出方法的有效性通过了在轨验证。     

基于鲁棒控制方法的卫星姿态控制

针对卫星姿态控制系统 ,建立了简化的线性数学模型 ,利用鲁棒控制方法设计了卫星姿态控制律 ,由于在设计中考虑了建模过程中的简化而带来的不确定性 ,因而基于线性模型所设计的控制律能够应用于非线性卫星姿态系统的控制     

基于OMNeT++的卫星姿态控制系统仿真

针对三轴稳定卫星的姿态控制系统,在离散事件仿真平台OMNeT 的基础上,建立了一个以星敏感器和陀螺为敏感器,反作用飞轮为执行机构的闭环控制仿真系统。采用双矢量定姿算法和PID控制算法,对该卫星在对地定向模式下的控制精度进行了仿真。仿真结果清晰地反映了星敏感器和反作用飞轮输出延时对控制精度的影响。整个仿真系统符合面向对象和模块化的程序设计理念,并实现了仿真程序的重用。     

静止轨道卫星姿态偏置对天线方向图影响的分析

地球静止轨道（GEO）卫星通常具备滚动、俯仰姿态偏置能力,即卫星滚动或俯仰姿态控制目标角度不是0°,而是某一设定角度,以便卫星定点位置改变时也能确保天线方向图覆盖满足要求。文章对某GEO卫星姿态偏置后对天线方向图及卫星其它性能的影响进行了分析,给出了卫星姿态偏置情况下天线覆盖区域的计算方法,在计算时考虑了卫星轨道倾角的影响。分析结果表明：由于卫星天线方向图设计时均有一定的设计裕度,卫星定点位置发生变化时,通过进行姿态偏置,可使其天线方向图满足用户使用要求,卫星在轨测试及运行结果也验证了这一结论。     

卫星地球-射频敏感器组合定姿滤波算法研究

基于卡尔曼滤波理论以及卫星定姿技术的发现状况，对卡尔曼滤波在静止轨道三轴稳定卫星红外地球敏感器和射频敏感器组合定姿中的应用作了一定的研究。建立了静止轨道三稳定卫星姿态动力学模型和红外－射频敏感器组合定姿的姿态量测模型，针对这一模型，应用推广的卡尔曼滤波进行姿态估计，并进行了计算机仿真，验证了滤波方法应用于静止轨道三轴稳定卫星红外地球敏感哭和射频敏感器组合定姿的有效性和优越性。     

Realization of modes of satellite attitude motion with a small level of microaccelerations using electromechanical executive devices

Quasi-static microaccelerations are estimated for a satellite specially designed to perform space experiments in the field of microgravity. Three modes of attitude motion of the spacecraft are considered: passive gravitational orientation, orbital orientation, and semi-passive gravitational orientation. In these modes the lengthwise axis of the satellite is directed along the local vertical, while solar arrays lie in the orbit plane. The second and third modes are maintained using electromechanical executive devices: flywheel engines or gyrodynes. Estimations of residual microaccelerations are performed with the help of mathematical modeling of satellite’s attitude motion under the action of gravitational and aerodynamic moments, as well as the moment produced by the gyro system. It is demonstrated that all modes ensure rather low level of quasi-static microaccelerations on the satellite and provide for a fairly narrow region of variation for the vector of residual microacceleration. The semi-passive gravitational orientation ensures also a limited proper angular momentum of the gyro system.     

反作用飞轮力矩模式控制系统设计

反作用飞轮是卫星姿态控制系统的重要执行元件，提高飞轮系统的性能对卫星姿态控制系统具有重要意义。介绍了反作用飞轮力矩模式反馈补偿控制系统的设计。首先建立了反作用飞轮数学模型，并分析了摩擦力矩干扰和速率测量噪声的特性，在此基础上进行了反馈补偿控制的设计。理论分析证明，应用反馈补偿控制的飞轮系统能够精确复现力矩输出指令。运行结果表明，在复现力矩输出指令精度方面，应用反馈补偿控制的飞轮系统优于电磁力矩控制的飞轮系统。特别在克服过零力矩干扰上，应用反馈补偿控制的飞轮系统具有较高的性能。     

基于磁强计测量的一种姿态估计方法研究

运行在低轨道上的三轴对地稳定小卫星在安全保持模式下的姿态确定要求测量部件的可靠性高,功耗低。本文选用三轴磁强计作为测量部件,给出在安全保持模式下的增广型Kalman滤波器(EKF)的设计。仿真结果表明在安全保持模式下,对卫星姿态能够进行很好的估计或校正。