基于降维STAP的自适应单脉冲测角算法

将空域广义单脉冲测角算法扩展至空时二维,提出基于降维STAP的自适应单脉冲测角算法,通过实时自适应修正鉴角曲线来降低角误差,实现杂波环境下的目标角误差估计,并且计算复杂度较低,从而保证机载平台在强杂波环境下对目标的稳定跟踪.仿真结果验证了该方法的有效性与性能优势.     

运动声呐空时自适应处理中的多普勒影响分析

为了将空时自适应处理(STAP)理论更好地应用于水下环境,提高运动声呐对混响的抑制性能,研究了多普勒对运动声呐STAP的影响。具体分析了由多普勒造成的回波脉宽伸缩变换以及目标空时导向向量失配带来的影响。分析结果表明,回波包络脉宽变化对于匹配滤波输出信噪比影响较小,而对空时导向向量修正可以有效提高目标方位估计精度以及混响抑制能力。     

基于三迭代与二阶锥规划的机载MIMO雷达稳健降维STAP方法

针对机载多输入多输出(MIMO)雷达空时自适应处理(STAP)中期望目标导向矢量的失配问题,提出一种基于三迭代(TRIA)与二阶锥规划(SOCP)的稳健降维MIMO-STAP方法。首先将MIMO-STAP权矢量分解为发射、接收、多普勒3个低维权矢量的Kronecker积,然后分别限定实际发射、接收、多普勒导向矢量与假定导向矢量之间的误差范数边界,通过优化最差性能,利用SOCP对各个低维权矢量进行三迭代求解,最后进行权矢量合成。该方法在保证机载MIMO雷达获取稳健STAP性能的同时,通过三迭代降维处理,能够有效降低训练样本数需求与运算复杂度,因此更具有实际应用价值。仿真结果验证了算法的有效性。     

基于杂波子空间估计的MIMO雷达降维STAP研究

 多输入多输出(MIMO)雷达是近年来出现的一种新体制雷达,针对MIMO体制的机载雷达开展空时自适应处理（STAP）技术研究是值得进一步努力的方向。本文研究了机载MIMO雷达STAP技术的降维算法,通过对STAP技术杂波抑制原理进行分析,推导并得到一种基于杂波子空间的降维算法。结合扁长椭球波函数（PSWF）的特点,提出了一种基于杂波子空间估计的降维算法,并与若干降维算法的杂波抑制性能进行比较。结果表明,当存在阵元幅相误差时,该算法在保持杂波抑制性能的同时能够有效地降低STAP算法的运算量。     

空时自适应处理张量波束成形器的外积合成法

为了解决空时自适应处理（Space-Time Adaptive Processing，STAP）对足量平稳训练快拍的要求，给出了一种设计STAP张量波束成形器的新算法——空时自适应处理张量子波束合成（TSS-STAP）法。分析表明：STAP中所需要的张量波束成形器，可首先在张量的各个子维度上分别进行子波束成形器的设计，然后再由张量的外积运算合成各子波束成形器而得到。进一步分析表明：由于本文算法可在较低自由度（DoF）的子维度上对张量波束成形器进行设计，因此降低了设计所需要的训练快拍数和计算复杂度，同时也实现了有效的去相关处理，使得其在非均匀杂波环境下有更好的目标检测性能。在仿真实验中，所提算法有效提升了目标检测结果，同时降低了目标检测所消耗的时间。     

圆台阵列杂波模型及空时二维自适应处理

针对圆台共形阵列,建立了空时二维自适应处理(STAP)的杂波模型,给出了圆台阵列杂波抑制最优权值的计算方法。在此基础之上,为了实现可应用到实际环境中的自适应处理方法,进一步讨论了将局部联合域(JDL)降维算法推广至圆台阵列中的问题。得出了圆台阵列JDL算法降维变换矩阵的表达形式,研究了参考波束的数目选取、波束指向等因素对降维损失的影响。理论分析以及仿真结果表明,通过合理选择通道数、波束方位向指向间隔等参数,该算法能够减少自适应波束形成的计算量,而且可以用较少的训练样本获得较好的处理性能。     

一种基于协方差矩阵加权的阵元误差补偿STAP处理

机载多通道阵列雷达天线在工程实践中不可避免地存在各类阵元误差,所产生的通道失配问题会对空时二维自适应处理的性能造成大的影响。对存在阵元误差时的阵列信号模型进行了分析,提出了一种基于协方差矩阵加权（CMT）的阵元误差补偿空时自适应处理（STAP）方法,在工程应用中该加权矩阵可通过地面天线定标及校飞过程确定,通过对总干扰协方差矩阵估计的加权预处理,可将实际阵元误差对STAP性能的影响控制在测量误差的影响范围,最后通过仿真验证了算法的有效性。     

非正侧视阵列机载雷达多空间角补偿算法

 非正侧阵列机载雷达的杂波分布随距离变化而变化,各距离单元的杂波分布不再满足独立同分布条件,造成统计型空时自适应处理(STAP)处理器性能下降。本文提出了一种多空间角补偿(MSAC)的非正侧视机载雷达杂波抑制方法,该方法先通过角度-多普勒补偿(ADC)预处理以消除在谱中心处的杂波非均匀,然后采用MSAC法在多个多普勒方向使参考单元和待检测单元的杂波谱保持一致,从而进一步消除在其余方位的杂波非均匀。仿真结果表明了该方法的性能明显优于ADC法,且运算量增加不多。     

STAP中采样支持问题研究

在机载雷达空时二维自适应处理 (STAP)中 ,足够数量的IID采样数据才可以构成杂波相关矩阵的有效估计 ,而实际雷达工作环境中的采样数总是有限的 针对这一问题 ,提出了将前后平均 ,对角加载 ,与降维处理相结合来降低采样数目要求 ,解决采样支持问题的方案 ,并进行了理论分析与仿真。显然 ,通过采用适当的降维处理与前后平均及对角加载相结合 ,所需采样数最多可降低到仅用 3～ 5个     

非均匀环境下利用单个数据集的STAP算法

对非均匀环境下利用单个数据集的机载雷达空时自适应处理(SDS-STAP)算法进行了研究。针对现有单个数据集类空时自适应算法存在的问题,提出了一种基于对待测数据集进行空时二维滑窗处理的二维幅度相位估计(2D-APES)算法。该算法利用回波的统计信息,不仅放宽了算法处理器对于雷达系统阵元数与脉冲数选取的约束,而且能够有效抑制杂波及待测单元内的干扰,同时降低了处理器的计算复杂度。最后,仿真数据及实测数据实验验证了所提算法的正确性与有效性。     

Comparison between monostatic and bistatic antenna configurationsfor STAP

The unique characteristics of bistatic radar operation on the performance of airborne/spaceborne moving target indicator (MTI) radars that use space-time adaptive processing (STAP) are discussed. It has been shown that monostatic STAP radar has the following properties. 1) For a horizontal flight path and a planar Earth the curves of constant clutter Doppler (isodops) are hyperbolas. 2) For a sidelooking antenna geometry the clutter Doppler is range independent. 3) Clutter trajectories in the cosφ-F plane (F=normalized Doppler) are in general ellipses (or straight lines for a sidelooking array). We demonstrate that these well-known properties are distorted by the displacement between transmitter and receiver in a bistatic configuration. It is shown that even for the sidelooking array geometry the clutter Doppler is range-dependent which requires adaptation of the STAP processor for each individual range gate. Conclusions for the design of STAP processors are drawn     

Reduced-rank STAP for high PRF radar

Due to the range ambiguity of high pulse-repetition frequency (HPRF) radars, echoes from far-range fold over near-range returns. This effect may cause low Doppler targets to compete with near-range strong clutter. Another consequence of the range ambiguity is that the sample support for estimating the array covariance matrix is reduced, leading to degraded performance. It is shown that space-time adaptive processing (STAP) techniques are required to reject the clutter in HPRF radar. Four STAP methods are studied in the context of the HPRF radar problem: low rank approximation sample matrix inversion (SMI), diagonally loaded SMI, eigencanceler, and element-space post-Doppler. These three methods are evaluated in typical HPRF radar scenarios and for various training conditions, including when the target is present in the training data     

Stap using knowledge-aided covariance estimation and the fracta algorithm

In the airborne space-time adaptive processing (STAP) setting, a priori information via knowledge-aided covariance estimation (KACE) is employed in order to reduce the required sample support for application to heterogeneous clutter scenarios. The enhanced FRACTA (FRACTA.E) algorithm with KACE as well as Doppler-sensitive adaptive coherence estimation (DS-ACE) is applied to the KASSPER I & II data sets where it is shown via simulation that near-clairvoyant detection performance is maintained with as little as 1/3 of the normally required number of training data samples. The KASSPER I & II data sets are simulated high-fidelity heterogeneous clutter scenarios which possess several groups of dense targets. KACE provides a priori information about the clutter covariance matrix by exploiting approximately known operating parameters about the radar platform such as pulse repetition frequency (PRF), crab angle, and platform velocity. In addition, the DS-ACE detector is presented which provides greater robustness for low sample support by mitigating false alarms from undernulled clutter near the clutter ridge while maintaining sufficient sensitivity away from the clutter ridge to enable effective target detection performance     

Angle/Doppler estimation in heavy-tailed clutter backgrounds

This work describes new methods on the modeling of the amplitude statistics of airborne radar clutter by means of alpha-stable distributions. We develop joint target angle and Doppler, maximum likelihood-based estimation techniques from radar measurements retrieved in the presence of impulsive uncorrelated noise modeled as an alpha-stable random process. We derive the Cramer-Rao bounds (CRBs) for the additive Cauchy interference scenario to assess the best case estimation accuracy which can be achieved. In addition, we introduce a new joint spatial- and Doppler-frequency high-resolution estimation technique based on the fractional lower order statistics of the measurements of a radar array. Simulation results demonstrate that the proposed methods can be of interest in the study of space-time adaptive processing (STAP) for airborne pulse Doppler radar arrays operating in impulsive interference environments     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

Adaptive cancellation method for geometry-induced nonstationary bistatic clutter environments

This paper describes and characterizes a new bistatic space-time adaptive processing (STAP) clutter mitigation method. The approach involves estimating and compensating aspects of the spatially varying bistatic clutter response in both angle and Doppler prior to adaptive clutter suppression. An important feature of the proposed method is its ability to extract requisite implementation information from the data itself, rather than rely on ancillary - and possibly erroneous or missing - system measurements. We justify the essence of the proposed method by showing its ability to align the dominant clutter subspaces of each range realization relative to a suitably chosen reference point as a means of homogenizing the space-time data set. Moreover, we numerically characterize performance using synthetic bistatic clutter data. For the examples considered herein, the proposed bistatic STAP method leads to maximum performance improvements between 17.25 dB and 20.75 dB relative to traditional STAP application, with average improvements of 6 dB to 10 dB.     

Implementing digital terrain data in knowledge-aided space-time adaptive processing

Many practical problems arise when implementing digital terrain data in airborne knowledge-aided (KA) space-time adaptive processing (STAP). This paper addresses these issues and presents solutions with numerical implementations. In particular, using digital land classification data and digital elevation data, techniques are developed for registering these data with radar return signals, correcting for Doppler and spatial misalignments, adjusting for antenna gain, characterizing clutter patches for secondary data selection, and ensuring independent secondary data samples. These techniques are applied to select secondary data for a single-bin post-Doppler STAP algorithm using multi-channel airborne radar measurement (MCARM) program data. Results with the KA approach are compared with those obtained using the standard sliding window method for choosing secondary data. These results illustrate the benefits of using terrain information, a priori data about the radar, and the importance of statistical independence when selecting secondary data for improving STAP performance