首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到14条相似文献,搜索用时 93 毫秒
1.
针对存在外部干扰、控制饱和以及执行器故障的航天器姿态跟踪控制问题,提出了基于反步法的有限时间控制方案。通过引入一类新型的具有有限时间收敛特性的积分式滑模面,设计了满足多约束的有限时间容错姿态跟踪控制器,并利用参数自适应方法使控制器设计不依赖于系统惯量信息和外部干扰的界。该容错控制方案的设计无需在线故障信息检测、分离甚至控制器重构,并显式地考虑了执行器输出的饱和幅值要求。稳定性分析表明:在控制饱和甚至执行器故障等多约束的条件下,本文所设计的控制器不仅保证了姿态跟踪的有限时间收敛性,且对于执行器故障具有优越的容错能力;数值仿真分析进一步验证了该控制器的控制性能,以及对外部干扰和系统不确定性的鲁棒性。  相似文献   

2.
针对存在执行器故障与外部干扰的刚体飞行器姿态控制系统,提出一种基于快速非奇异终端滑模(NSFTSM)的姿态容错控制方法.控制方法不仅保证姿态机动过程的快速性,而且避免了传统的终端滑模面所带来的奇异性问题.采用二阶鲁棒精确微分器估计执行器故障与外部干扰,采用快速非奇异终端滑模技术设计姿态容错控制律,根据Lyapunov稳定性理论证明了方法的稳定性.稳定性分析表明,通过引入新型快速非奇异终端滑模,控制器使得闭环系统能够快速收敛到滑模面的微小邻域内,进而收敛到系统平衡点的微小邻域内,并且系统对外部干扰具有较强的鲁棒性.数值仿真结果验证了方法在姿态跟踪控制中的有效性.  相似文献   

3.
胡庆雷  姜博严  石忠 《航空学报》2014,35(1):249-258
针对受干扰的刚体航天器冗余执行器存在故障与控制受限的姿态跟踪控制问题,提出一类基于新型指数形式的非奇异快速滑模面(ENFTSM)与趋近律的姿态容错控制器设计方法。当部分推力器发生故障时,假设剩余推力器具有输出饱和特性且能提供足够推力保证航天器执行任务,相比一般终端滑模控制器,本文设计的控制器不仅能使系统状态以更快的速度到达平衡点,且不需要在线对执行器故障信息进行检测和分离。基于Lyapunov方法证明本文设计的控制器能保证闭环系统稳定,且能有效地抑制外部干扰、控制受限和执行器故障等约束。最后对提出的控制算法进行了数值仿真,其结果表明了该控制器的有效性。  相似文献   

4.
马广富  朱庆华  王鹏宇  郭延宁 《航空学报》2018,39(6):321763-321763
针对航天器姿态跟踪控制的快速性需求,提出一类自适应终端滑模有限时间控制方法,通过引入饱和函数解决了终端滑模控制器的奇异问题,并结合实际有限时间稳定概念显式地给出了系统状态收敛时间和收敛范围之间的对应关系;为在提高系统鲁棒性的同时避免控制器抖振,设计了一种新型自适应律估计并补偿未知环境干扰。进一步地,针对如遥感卫星对地扫描成像等姿态跟踪任务中存在的状态约束问题,通过在控制器中引入具有对数形式的预设性能项,使系统滑模面响应具有期望的动态过程,约束了航天器姿态跟踪误差及其一阶导数的变化范围。仿真结果表明,设计的控制器具有较高的控制精度和响应速度,满足实际任务对状态约束的需求,且其控制输出不存在奇异和抖振,具备良好的工程应用价值。  相似文献   

5.
基于新型终端滑模的航天器执行器故障容错姿态控制   总被引:4,自引:2,他引:4  
胡庆雷  姜博严  石忠 《航空学报》2014,35(1):249-258
 针对受干扰的刚体航天器冗余执行器存在故障与控制受限的姿态跟踪控制问题,提出一类基于新型指数形式的非奇异快速滑模面(ENFTSM)与趋近律的姿态容错控制器设计方法。当部分推力器发生故障时,假设剩余推力器具有输出饱和特性且能提供足够推力保证航天器执行任务,相比一般终端滑模控制器,本文设计的控制器不仅能使系统状态以更快的速度到达平衡点,且不需要在线对执行器故障信息进行检测和分离。基于Lyapunov方法证明本文设计的控制器能保证闭环系统稳定,且能有效地抑制外部干扰、控制受限和执行器故障等约束。最后对提出的控制算法进行了数值仿真,其结果表明了该控制器的有效性。  相似文献   

6.
梅亚飞  廖瑛  龚轲杰  罗达 《航空学报》2021,42(11):525089-525089
针对相对运动航天器姿轨一体化控制问题,考虑执行器故障和控制输入饱和的影响,提出了一种基于滑模的模糊自适应固定时间容错控制方法。首先,在李群SE(3)的框架下建立并推导相对运动航天器姿轨一体化误差动力学模型;其次,引入执行器故障和控制输入饱和的问题,采用双幂次快速终端滑模面,并结合模糊自适应方法设计了固定时间稳定的容错控制器,可以实现执行器故障情况下相对运动航天器的高精度快速跟踪控制;然后,运用Lyapunov方法证明了系统的稳定性,该控制器不仅能不依赖于系统的初始状态实现滑模趋近和到达阶段的固定时间稳定性,而且由于采用模糊逼近方法结合自适应更新策略可以实时高精度地估计系统的总扰动信息,因此可以达到快速高精度的容错控制目标;最后,对所提出的的控制方法进行数值仿真分析,结果验证了该方法的有效性和可行性。  相似文献   

7.
非刚体航天器存在时变的惯量、执行器完全失效或衰退故障以及外界干扰的情况,提出一种有限时间自适应姿态跟踪容错控制方法。首先,基于有限时间理论和自适应方法,设计惯量不确定性自适应估计项和外界干扰参数自适应估计项进行系统补偿,克服惯量不确定性和抑制外界干扰;然后,基于容错控制和双幂次方法,设计一种自适应有限时间姿态跟踪容错控制算法,并且利用Lyapunov稳定性理论证明所提算法能够保证航天器姿态跟踪系统实际有限时间稳定;最后,对仿真结果进行验证。结果表明:所提有限时间姿态跟踪容错控制方法是有效的。  相似文献   

8.
执行器故障的挠性航天器姿态滑模容错控制   总被引:1,自引:1,他引:0  
肖冰  胡庆雷  霍星  马广富 《航空学报》2011,32(10):1869-1878
针对挠性航天器执行器卡死与失效故障的姿态稳定控制问题,提出一种改进型滑模容错控制策略.与传统的滑模控制相比,该方法能削弱传统滑模控制中抖振现象对姿态控制精度的影响,且它采用自适应技术在线估计系统中的不确定参数,从而保证控制性能对外部干扰、不确定甚至时变转动惯量具有良好的鲁棒性.该控制器并不需要任何在线或离线的故障信息,...  相似文献   

9.
梁小辉  胡昌华  周志杰  王青 《航空学报》2021,42(4):524915-524915
针对运作火箭主动段发动机摆动执行机构故障下的姿态控制问题,结合自适应动态规划(ADP)方法设计了一种智能容错控制策略。该智能容错控制器主要包括2部分:容错稳定控制部分和优化补偿部分。容错稳定控制部分利用自适应和滑模变结构控制设计,主要维持执行机构故障下姿态控制系统的稳定,保证姿态跟踪误差的有限时间收敛;优化补偿部分采用执行-评价结构,利用ADP的在线学习优势,根据姿态系统的跟踪误差(尤其是系统故障、强干扰导致的跟踪偏差),设计ADP算法产生补偿控制来进一步优化姿态控制系统的跟踪性能。仿真验证表明,即使存在外部干扰和执行机构故障的情况下,所提方法仍能保证系统稳定且精确跟踪指令信号。  相似文献   

10.
针对受执行器故障和外界干扰影响的集群无人机(UAV)协同编队控制问题,提出了一种自适应快速非奇异积分滑模(FNISM)容错控制(FTC)方法。为使集群无人机在执行任务时具有良好的协同跟踪性能,通过对无人机实际飞行情况的分析,考虑了无人机编队飞行时的执行器故障和尾涡扰动等对跟踪性能的不利影响。采用小脑模型关节控制器神经网络(CMANN)来估计并消除外部干扰的影响,同时运用CMANN逼近补偿执行器故障。研究表明:所提出的容错控制方案可以保证无人机编队闭环系统在故障情况下的最终一致有界稳定,并且可以通过减小滑模设计参数提高收敛速度,通过增大虚拟和实际控制器参数提高控制精度。4架无人机的集群编队在该方法、基于径向基神经网络(RBFNN)的鲁棒动态面容错控制、比例微分(PD)滑模容错控制3种方法下的对比仿真结果表明该方法在无人机集群编队出现故障时具有更优异的协同控制性能。  相似文献   

11.
In this paper,attitude coordinated tracking control algorithms for multiple spacecraft formation are investigated with consideration of parametric uncertainties,external disturbances,communication delays and actuator saturation.Initially,a sliding mode delay-dependent attitude coordinated controller is proposed under bounded external disturbances.However,neither inertia uncertainty nor actuator constraint has been taken into account.Then,a robust saturated delay dependent attitude coordinated control law is further derived,where uncertainties and external disturbances are handled by Chebyshev neural networks (CNN).In addition,command filter technique is introduced to facilitate the backstepping design procedure,through which actuator saturation problem is solved.Thus the spacecraft in the formation are able to track the reference attitude trajectory even in the presence of time-varying communication delays.Rigorous analysis is presented by using Lyapunov-Krasovskii approach to demonstrate the stability of the closed-loop system under both control algorithms.Finally,the numerical examples are carried out to illustrate the efficiency of the theoretical results.  相似文献   

12.
A fault tolerant control (FTC) design technique against actuator stuck faults is investigated using integral-type sliding mode control (ISMC) with application to spacecraft attitude maneuvering control system. The principle of the proposed FTC scheme is to design an integral-type sliding mode attitude controller using on-line parameter adaptive updating law to compensate for the effects of stuck actuators. This adaptive law also provides both the estimates of the system parameters and external disturbances such that a prior knowledge of the spacecraft inertia or boundedness of disturbances is not required. Moreover, by including the integral feedback term, the designed controller can not only tolerate actuator stuck faults, but also compensate the disturbances with constant components. For the synthesis of controller, the fault time, patterns and values are unknown in advance, as motivated from a practical spacecraft control application. Complete stability and performance analysis are presented and illustrative simulation results of application to a spacecraft show that high precise attitude control with zero steady-error is successfully achieved using various scenarios of stuck failures in actuators.  相似文献   

13.
This paper presents a novel Fault Tolerant Control(FTC) scheme based on accelerated Landweber iteration and redistribution mechanism for a horizontal takeoff horizontal landing reusable launch vehicle(RLV). First, an adaptive law based on fixed-time non-singular fast terminal sliding mode control(NFTSMC), which focuses on the attitude tracking controller design for RLV in the presence of model couplings, parameter uncertainties and external disturbances, is proposed to produce virtual control co...  相似文献   

14.
In this paper, we consider the attitude stabilization problem for a rigid spacecraft with external disturbances. To obtain a better disturbance rejection property, we employ finite-time control techniques. In the absence of disturbances, by employing continuous finite-time control method, a continuous finite-time controller is designed such that the attitude of the rigid spacecraft will converge to the origin in finite time. In the presence of disturbances, by employing terminal sliding mode method, a discontinuous finite-time control law is proposed such that the states will eventually converge to a small region of the origin, which can be rendered as small as desired. Numerical simulation results show the effectiveness of the method.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号