Evolution of convex structure during counter-rotating electrochemical machining based on kinematic modeling

Counter-rotating electrochemical machining (CRECM) is a novel electrochemical machining (ECM) method, which can be used to machine convex structures with complex shapes on the outer surface of casings. In this study, the evolution of the convex structure during CRECM is studied. The complex motion form of CRECM is replaced by an equivalent kinematic model, in which the movement of the cathode tool is realized by matrix equations. The trajectory of the cathode tool center satisfies the Archimedes spiral equation, and the feed depth in adjacent cycles is a constant. The simulation results show that the variations of five quality indexes for the convex structure: as machining time increases, the height increases linearly, and the width reduces linearly, the fillets at the top and root fit the rational function, and the inclination angle of the convex satisfies the exponential function. The current density distributions with different rotation angles is investigated. Owing to the differential distribution of current density on workpiece surface, the convex is manufactured with the cathode window transferring into and out of the processing area. Experimental results agree very well with the simulation, which indicates that the proposed model is effective for prediction the evolution of the convex structure in CRECM.     

Analysis and control of inter-electrode gap during leveling process in counter-rotating electrochemical machining

The inter-electrode gap (IEG) is an essential parameter for the anode shaping process in electrochemical machining (ECM) and directly affects the machining accuracy. In this paper, the IEG during the leveling process of an oval anode workpiece in counter-rotating ECM (CRECM) is investigated. The variation of the minimum IEG is analyzed theoretically, and the results indicate that rather than reaching equilibrium, the minimum IEG in CRECM expands constantly when a constant feed speed is used for the cathode tool. This IEG expansion leads to a poor localization effect and has an adverse influence on the roundness of the machined workpiece. To maintain a small constant IEG in CRECM, a variable feed speed is used for the cathode based on a fitted equation. The theoretical results show that the minimum IEG can be controlled at a small value by using an accelerated feed speed. Experiments have been conducted using a specific experimental apparatus in which the cathode tool is designed as a combined structure of two sectors and a thin sheet. By detecting the machining currents flowing through the minimum IEG, how the latter varies is obtained indirectly. The results indicate that using an accelerated feed speed is effective for controlling the IEG, thereby improving the roundness of the machined workpiece.     

Investigation of anode shaping process during co-rotating electrochemical machining of convex structure on inner surface

A novel co-rotating electrochemical machining method is proposed for fabricating convex structures on the inner surface of a revolving part. The electrodes motion and material removal method of co-rotating electrochemical machining are different from traditional electrochemical machining. An equivalent kinematic model is established to analyze the novel electrodes motion,since the anode and cathode rotate in the same direction while the cathode simultaneously feeds along the line of centres. Acc...     

Electrochemical machining of a convex strips structure on a revolving part by using site directed power interruption

Revolving parts with complex surface structures are widely used in machinery and mechanical equipment. The ECM process provides its adequacy to cut hard materials with different shapes, and its applications are widely increased, due to its outstanding advantages. In this paper, a new method for machining a convex strips structure on a cylinder by using site directed power interruption(SDPI) in the ECM process is presented. A variable correction value of the power-off time was defined and optimized to obtain the ideal interval for better machining accuracy and stability.The electric field distribution and the simulated convex profiles show that the stray current density can be reduced effectively by using the proposed method. The correction value has an important influence on the machining accuracy. A suitable correction value in the range of 0.6–1.2 s can effectively improve the machining accuracy of the convex strips structure. Experiments were also conducted to verify the proposed method. Results have confirmed that the stray corrosion on the convex strips surface is significantly reduced and the machining accuracy of convex strips structure is remarkably improved by using the proposed method with a suitable correction value in the ECM process. Finally, a convex strip with a height of 2 mm on a thin-wall revolving part was also produced successfully using a correction value of 0.9.     

Cathode design investigation based on iterative correction of predicted profile errors in electrochemical machining of compressor blades

Electrochemical machining (ECM) is an effective and economical manufacturing method for machining hard-to-cut metal materials that are often used in the aerospace field. Cathode design is very complicated in ECM and is a core problem influencing machining accuracy, especially for complex profiles such as compressor blades in aero engines. A new cathode design method based on iterative correction of predicted profile errors in blade ECM is proposed in this paper. A math-ematical model is first built according to the ECM shaping law, and a simulation is then carried out using ANSYS software. A dynamic forming process is obtained and machining gap distributions at different stages are analyzed. Additionally, the simulation deviation between the prediction profile and model is improved by the new method through correcting the initial cathode profile. Further-more, validation experiments are conducted using cathodes designed before and after the simulation correction. Machining accuracy for the optimal cathode is improved markedly compared with that for the initial cathode. The experimental results illustrate the suitability of the new method and that it can also be applied to other complex engine components such as diffusers.     

Electrochemical machining of complex components of aero-engines: Developments,trends, and technological advances

Because of several advantages, such as no tool wear, independence on the mechanical properties of the material, and high machining efficiency, electrochemical machining (ECM) has become a viable method for machining components in numerous industrial applications, particularly in the manufacture of typical aero-engine components with complex structures fabricated from materials that are difficult to cut. This paper highlights the current developments, new trends, and technological advances of key factors of ECM, such as electrochemical dissolution characteristics of novel difficult to cut materials which are often used in aero-engine, numerical simulation of electrochemical process, design for the complex profile and structure of cathode tool, flow field simulation and design for uniform electrolyte flow, and innovation of electrochemical machining or hybrid methods which reflect the state of the art in academic and industrial research on electrochemical machining in aero-engine manufacturing.     

Trajectory control strategy of cathodes in blisk electrochemical machining

A turbine blisk, which combines blades and a disk together, is one of the most important components of an aero engine. In the process of blisk electrochemical machining (ECM), the sheet cathode, which is usually used as a tool electrode, has a complicated structure. In addition to that, the channel between the adjacent blades is narrow and twisted, so interference is apt to happen when the sheet cathode feeds into the channel. Therefore, it is important to choose suitable trajectory control strategy. In this paper, a new trajectory control strategy of the sheet cathode is presented and corresponding simulation analysis is conducted on the basis of an actual blisk model. The simulation results demonstrate that the sheet cathode can feed into the channel by a spatial line trajectory without interference. Moreover, the verification experiments are carried out according to the simulation. The experimental results show that the cathode can move into the channel without interference. It is verified that the new trajectory control strategy is correct and can be used in the blisk ECM process successfully.     

整体叶盘通道电解加工电极多维运动轨迹优化

为了提高整体叶盘通道余量分布的均匀性,提出了电极运动轨迹优化方法.分析了电解加工间隙对电极运动轨迹的影响,优化了工具电极在叶顶及叶根圆柱面上的运动轨迹,并基于轨迹线上采样点作拟合垂线段中点的样条曲线获得新的轨迹线.为了验证优化后轨迹的合理性,进行了叶盘通道电解加工对比试验.试验表明,与优化前的轨迹相比,采用优化后的轨迹...     

Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap

Electrochemical machining (ECM) has emerged as an important option for manufacturing the blisk. The inter-electrode gap (IEG) distribution is an essential parameter for the blisk precise shaping process in ECM, as it affects the process stability, profile accuracy and surface quality. Larger IEG leads to a poor localization effect and has an adverse influence on the machining accuracy and surface quality of blisk. To achieve micro-IEG (<50 μm) blisk finishing machining, this work puts forward a novel variable-parameters blisk ECM strategy based on the synchronous coupling mode of micro-vibration amplitude and small pulse duration. The modelling and simulation of the blisk micro-IEG machining have been carried out. Exploratory experiments of variable-parameters blisk ECM were carried out. The results illustrated that the IEG width reduced with the progress of variable parameter process. The IEG width of the blade’s concave part and convex part could be successfully controlled to within 30 μm and 21 μm, respectively. The profile deviation for the blade’s concave surface and convex surface are 49 μm and 35 μm, while the surface roughness reaches R_a = 0.149 μm and R_a = 0.196 μm, respectively. The profile accuracy of the blisk leading/trailing edges was limited to within 91 μm. Compared with the currently-established process, the profile accuracy of the blade’s concave and convex profiles was improved by 50.5 % and 53.3 %, respectively. The surface quality was improved by 53.2 % and 50.9 %, respectively. Additionally, the machined surface was covered with small corrosion pits and weak attacks of the grain boundary due to selective dissolution. Some electrolytic products were dispersed on the machined surface, and their components were mainly composed of the carbide and oxide products of Ti and Nb elements. The results indicate that the variable-parameters strategy is effective for achieving a tiny IEG in blisk ECM, which can be used in engineering practice.     

薄型中空电极振动电解切割TB6钛合金

TB6钛合金由于具有优越的性能,广泛地用于航空航天领域。然而从大余量的TB6钛合金锻铸件毛坯加工成复杂结构的零件,其加工效率低,刀具和机床成本高,造成了极大的浪费。为解决这一问题,提出了一种利用薄型中空电极进行快速大余量去除的电解加工(ECM)方法,即将零件与多余材料切割分离,有望较大程度提高加工效率,降低加工成本。为改善电解加工流场特性,提高加工精度,对电极施加振动,并对薄型中空电极的振动切割进行了建模分析和试验研究。试验结果表明,合适的振动幅值和频率(A=0.05mm,f=50Hz)可以使得各处电解液电导率趋于一致,从而提高加工的精度、稳定性和效率。复杂结构件的成功切割证明了薄型中空电极振动电解切割加工技术具有一定的适用性。     

电解加工发动机叶片阴极进给方向的优化

 超薄扭曲叶片由于叶型超薄、型面复杂、精度要求高, 目前主要以电解加工作为首选加工工艺。以某新型发动机叶片为研究对象, 对电解加工阴极的进给方向、毛坯装夹位置做了优化选择并对叶片型面采样点的法线方向与阴极斜向进给方向的夹角分布做了详细的阐述, 为阴极型面的设计打下了坚实的基础。     

基于FANUC 0i系统的数控铣床的坐标旋转指令的使用研究

对教材上的坐标旋转指令(G68)应用例题的程序进行仿真加工,结果发现与图纸要求的形状不相符,分析其原因是该指令没有坐标原点平移的功能。要正确使用该指令实现加工,可以先采用坐标原点平移,再旋转的方法;或采用先控制刀具运动到旋转中心,再执行旋转指令,旋转指令后的程序段都采用增量值编程的方法。对这两种方法进行编程和仿真加工,结果显示符合图纸要求。     

Simulation and experimental investigation on a dynamic lateral flow mode in trepanning electrochemical machining

An appropriate flow mode of electrolyte has a positive effect on process efficiency, surface roughness, and machining accuracy in the electrochemical machining(ECM) process. In this study, a new dynamic lateral flow mode, in which the electrolyte flows from the leading edge to the trailing edge, was proposed in trepanning ECM of a diffuser. Then a numerical model of the channel was set up and simulated by using computational fluid dynamics software. The result showed that the distribution of the flow field was comparatively uniform in the inter-electrode gap. Furthermore, a fixture was designed to realize this new flow mode and then corresponding experiments were carried out. The experimental results illustrated that the feeding rate of the cathode reached 2 mm/min, the best taper angle was about 0.4°, and the best surface roughness was up to Ra= 0.115 lm. It reflects that this flow mode is suitable and effective, and can also be applied to machining other complex structures in trepanning ECM.     

Electrochemical trepanning with uniform electrolyte flow around the entire blade profile

In the traditional machining process for diffusers, blades are easily deformed, and methods suffer from high tool wear and low efficiency. Electrochemical machining(ECM) possesses unique advantages when applied to these difficult-to-machine materials. In the ECM process, theflow field plays a crucial role. Here, an electrolyte flow mode that supplies uniform flow around the entire blade profile was adopted for electrochemical trepanning of diffusers. Various flow rates were employed to obtain the optimal flow field. Simulations were conducted using ANSYS software, and results indicated that increasing the flow rate substantially afforded a more uniform flowfield. A series of experiments was then performed, and results revealed that increasing the flow rate greatly improved both the machining efficiency and the surface quality of the diffusers. The maximum feeding rate of the cathode reached 4 mm/min, the blade taper of the concave part decreased to 0.02, and the blade roughness was reduced to 1.216 lm. The results of this study demonstrated the high feasibility of this method and its potential for machining other complex components for engineering applications.     

基于电解扫掠成形原理的整体叶盘叶根加工方法

采用片状或管状阴极电解加工(ECM)后的整体叶盘由于加工运动、阴极形状等原因在叶根处会形成一定的加工残留,影响整体叶盘的加工精度。针对叶片电解加工后形成的叶根残留,开展去除叶根残留电解加工方法的研究,解决叶根电解加工的阴极结构、加工路径设计等难题。首先,分析了叶根的残留分布情况以及叶间通道的结构,采用了电解扫掠成形加工方案。其次,设计了阴极结构与加工路径,在阴极结构上采用了扇形流道并分析了电解液流速分布,通过增加引流槽、改变倾角等措施改善了流场;对阴极的运动路径进行了规划,利用专用仿真软件对阴极运动干涉与加工程序进行了检验;通过附加叶盘转动补偿了由于不同截面内叶间通道宽度与阴极刃口尺寸不一致给加工带来的不足。最后,制作了电解加工装置并通过试验对叶根电解加工方法进行了验证。试验结果表明,该加工方法有效去除了叶根残留,加工表面质量好,加工精度达到了要求。     

Simulation and experimental investigation of inner-jet electrochemical grinding of GH4169 alloy

GH4169 alloy is one of the most commonly used materials in aero engine turbine blades, but its machinability is poor because of its excellent strength at high temperatures. Electrochemical machining (ECM) has become a common method for machining this alloy and other difficult-to-machine materials. Electrochemical grinding (ECG) is a hybrid process combining ECM and conventional grinding. In this paper, investigations conducted on inner-jet ECG of GH4169 alloy are described. Two types of inner-jet ECG grinding wheels were used to machine a flat bottom surface. The machining process was simulated using COMSOL software, and machining gaps under different machining parameters were obtained. In addition, maximum feed rates and maximum material removal rates under different machining parameters were studied experimentally. The maximum sizes and the uniformity of the distributions of the gaps machined by the two grinding wheels were compared. The effects of different applied voltages on the machining results were also investigated.     

Electrochemical machining on blisk channels with a variable feed rate mode

Electrochemical machining (ECM) is an economical and effective method for blisk manufacturing and includes two steps: channel machining and profile machining. The allowance distribution after the channel machining will directly affect the profile machining. Therefore, to improve the uniformity of allowance distribution in the machining of channels, a method that incorporates a variable feed rate mode is developed. During the machining process, the feed rates are dynamically changed according to the needs of the side gap at the different feed depths. As a result, the side gaps at the different feed depths vary, contributing to a decrease in the allowance difference. In this study, the dissolution processes of a blisk channel are simulated using different feed rates, and prediction profiles are obtained. Based on the prediction profiles, the relationship among the feed rate, feed depth, and side gap is established. Then, the feed rates at different feed depths are adjusted according to the relationship. In addition, contrast experiments are conducted. Compared with blisk channel ECM using a constant feed rate of 1 mm/min, using the variable feed rate decreases the allowance differences in the convex and concave parts by 62.2 % and 67.4 %, respectively. This indicates that using the variable feed rate in the ECM process for a blisk channel is feasible and efficient.     

Electrochemical machining of burn-resistant Ti40 alloy

This study investigates the feasibility of using electrochemical machining(ECM) to produce critical aeroengine components from a new burn-resistant titanium alloy(Ti40), thereby reducing costs and improving efficiency relative to conventional mechanical machining.Through this, it is found that an aqueous mix of sodium chloride and potassium bromide provides the optimal electrolyte and that the surface quality of the Ti40 workpiece is improved by using a pulsed current of1 k Hz rather than a direct current.Furthermore, the quality of cavities produced by ECM and the overall material removal rate are determined to be dependent on a combination of operating voltage, electrolyte inlet pressure, cathode feeding rate and electrolyte concentration.By optimizing these parameters, a surface roughness of 0.371 lm has been achieved in conjunction with a specific removal rate of more than 3.1 mm3/A?min.     

Experimental investigation of rotary sinking electrochemical discharge milling with high-conductivity salt solution and non-pulsed direct current

Electrochemical milling is a modified technique of traditional electrochemical machining (ECM) that can be used to manufacture some helicopter transmission system parts. The use of rotary tools and an inner-jet electrolyte supply pattern can greatly improve the material removal rate (MRR) in a single pass. However, the feed speed is generally limited to minimize the tool wear. To increase the MRR, electrical discharge machining (EDM) is introduced into the electrochemical milling process. The tool rotation is employed to interrupt the discharge and the high-conductivity salt solution and non-pulsed direct current power supply are also adopted to increase ECM, eventually, a new machining method is proposed, which can be called rotary sinking electrochemical discharge milling (RSECD milling). The mechanism of it is explored in this study by analyzing the machined current, MRR, surface morphology, and tool wear at different applied voltages and feed speeds. Besides, the RSECD milling using the tool with a larger diameter is also conducted to further verify the effectiveness. In particular, the MRR can be increased by 742.5% when using the tool with a diameter of 20 mm at the applied voltage of 20 V.     

基于特征的蒙皮镜像铣加工残区刀轨优化方法

镜像铣加工装备及其加工工艺是蒙皮零件加工的有效手段,其特殊工艺对加工刀轨提出了等步距、无交叉、无抬刀且无残留等特殊要求。针对蒙皮零件加工特征的复杂形状,在满足等步距、无抬刀、无交叉的条件下对加工残留区域进行刀轨优化是一个难题。为解决以上难题,本文提出了一种基于特征的蒙皮镜像铣加工残区刀轨优化方法。该方法基于特征将蒙皮零件的工艺信息与几何信息相关联,自动提取加工特征的加工面及其对应的刀轨,将刀轨分割成若干段子刀轨,并构建子加工区域,再利用布尔并运算得到最终可加工区域。然后对加工面区域与最终可加工区域求布尔差识别出加工残留区域,并根据加工残区位置自适应生成满足蒙皮镜像铣特殊要求的优化刀轨。以典型复杂蒙皮零件验证本文提出的方法,结果表明,基于特征的蒙皮镜像铣加工残区刀轨优化方法可自动识别加工残区,并生成满足蒙皮镜像铣特殊要求的加工残区优化刀轨,为提高蒙皮零件数控编程效率提供技术支撑。