共查询到20条相似文献,搜索用时 383 毫秒
1.
2.
陈伟 《航空标准化与质量》2006,(2):47-50
电缆敷设是影响飞机系统电磁兼容性的一个重要因素.本文从电磁兼容方面对电缆的安装设计进行了分析,介绍了电线电缆的电磁兼容性分类与布线要求,对电缆按地的电磁兼容性技术进行了阐述,并讨论了电缆屏蔽层的接地方式、接地点对电磁耦合的影响. 相似文献
3.
董其义 《海军航空工程学院学报》2009,24(5):556-558
通过对导弹自动测试系统电磁兼容性特点与现状进行分析,结合系统组成对电磁兼容性测试进行研究,研究结果对解决自动测试系统潜在的电磁兼容性问题,对充分发挥测试系统的性能、降低电磁干扰、实现系统电磁兼容性有一定的工程应用价值。 相似文献
4.
王兵 《航空精密制造技术》1998,(4)
依据有关的电磁兼容性标准,并结合国内外的情况,着重对电磁兼容性标准剪裁的必要性、方式、方法、时机和分工问题进行了论述,同时提出在项目剪裁中应注意的问题。 相似文献
5.
陈平川 《航空精密制造技术》1988,(4)
本文综述了电磁兼容性技术的发展状况,介绍了国内外研究电磁兼容性标准的概貌,分析了电磁兼容性技术发展的趋势以及近年来得到普遍重视的原因。文章对工业现场用机电一体化产品的研究和生产单位应该采取什么对策提出了作者自己的看法。 相似文献
6.
电起爆器结构简单、体积小、重量轻且通用性强,这样,它在飞机上的军械系统中得到广泛的应用。由于它对静电和电磁辐射特别敏感,因此,在电磁兼容性设计上需采取可靠的防护措施。本文介绍了电爆装置防射频危害的设计及有关电磁兼容性方面的试验,与从事这方面工作的工程技术人员商讨。 相似文献
7.
针对武器装备电磁兼容性系统验证技术的特点和必要性以及国内外的发展情况,提出了武器装备电磁兼容性系统验证技术的研究内容和验证项目。 相似文献
8.
9.
根据当前研制生产中存在的电磁兼容性控制和管理的问题,指出电子设备电磁兼容性控制是一项系统工程,必须从产品设计、研制、试验、生产等各环节进行综合管理;提出加强电子设备研制生产中电磁兼容性管理的方法和重点内容。 相似文献
10.
汽车车速传感器的电磁兼容设计 总被引:1,自引:0,他引:1
电磁兼容性作为汽车电器可靠性参数日益受到重视。针对汽车车速传感器所面临的电磁兼容问题提出了一种设计方案,应用该方案的车速传感器电磁兼容性测试结果符合速度传感器通用技术条件的整体误差标准,并在实际应用中获得了预期的效果。该电磁兼容设计方案对汽车中其他电子设备的电磁兼容性设计同样具有参考意义。 相似文献
11.
12.
文章在建立了线性调频步进ISAR回波信号模型的基础上,对线性调频步进雷达ISAR信号特性进行了详细的分析,指出了由径向速度和转动速度所引起的耦合项、一次项和二次项对距离合成高分辨和方位聚焦的影响;给出了线性调频步进雷达ISAR成像的详细步骤,并用仿真论证了文章分析的可靠性。 相似文献
13.
Multifrequency Imaging of Radar Turntable Data 总被引:1,自引:0,他引:1
In recent years synthetic-aperture radars (SAR) have proven to be very useful two-dimensional imaging tools in various fields. Based on the synthetic-aperture concepts, different imaging modes are possibe with various operating characteristics. We describe a special case where circular-projection radar data are coherently processed to yield both azimuth and range resoultion. Experiments are performed using data obtained from the radar target scatter site (RAT SCAT) radar cross-section facility. Fairly good results are obtained which illustrate the versatility of coherent syntheticaperture processing of pulse-to-pulse high-range-resolution radar returns. A discrete multifrequency stepped and pulsed waveform is the basic transmitted signal from which range-Doppler images are generated. The RAT SCAT turntable facility allows interesting model targets to be illuminated from which radar images can then be computed. One such application of the processing is described. 相似文献
14.
15.
《Aerospace and Electronic Systems Magazine, IEEE》1996,11(11):39-43
Introducing imaging capability to an existing radar, even if it is a high RF bandwidth radar, may be difficult, due to limitations on the IF bandwidth, limitations on the pulse repetition frequency and electromagnetic compatibility problems. This paper discusses the use of thinned stepped frequency waveforms, which enable the radar to switch between RF frequencies to provide a synthesized wide RF bandwidth, while the thinning may alleviate some of the constraints imposed on the radar. Random and periodic thinning are discussed in the first part of this paper. However, thinning may cause degradation in image quality, thus an additional technique-Sequence CLEAN deconvolution-is suggested. Sequence CLEAN is an iterative deconvolution algorithm, adopted from the field of radioastronomy, which is capable of resolving close targets in a dense environment, where the system response is heavily affected by high sidelobes 相似文献
16.
Jiang Zhihong Huang Fukan Wan Jianwei Cheng Zhu 《中国航空学报》2007,20(4):339-345
This paper presents a modified frequency scaling algorithm for frequency modulated continuous wave synthetic aperture radar (FMCW SAR) data processing. The relative motion between radar and target in FMCW SAR during reception and between transmission and reception will introduce serious dilation in the received signal. The dilation can cause serious distortions in the reconstructed images using conventional signal processing methods. The received signal is derived and the received signal in range-Doppler domain is given. The relation between the phase resulting from antenna motion and the azimuth frequency is analyzed. The modified frequency scaling algorithm is proposed to process the received signal with serious dilation. The algorithm can effectively eliminate the impact of the dilation. The algorithm performances are shown by the simulation results. 相似文献
17.
18.
基于广义S变换进行雷达信号时频滤波去噪 总被引:3,自引:0,他引:3
S变换自问世以来,凭借其优越性已经被广泛地应用于数字信号处理中。针对深空目标雷达回波信号的复杂性,为了得到较好的雷达回波信号,将基于广义S变换的时频滤波应用于雷达回波信号去噪中,并利用低通滤波器设计了时频滤波算子,克服了传统滤波去噪方法滤波因子不能随时间、频率变化而变化的缺陷。通过理论分析与仿真波形对比表明,滤波后能有效地去除噪声,很好地保留了原始雷达回波信号的信号特征,展示了基于广义S变换的时频滤波的可行性,为雷达回波信号去噪提供提供了一种很好的方法。 相似文献
19.
分析了准连续波三通道雷达接收机的特点,提出了一种先进的雷达数字信号处理机的实现方案。该方案采用了中频采样、高速 DSP和并行体系结构等先进技术。在系统实现层次上,分析了一些中频采样实现方法的局限,进而提出了适合准连续波雷达回波特点的采样滤波器的设计方法和采样频率选择公式。在硬件设计上,本系统采用了32位浮点 DSP--ADSP21060和相应的并行结构。 相似文献
20.
为研究转子不同叶尖间隙形状对跨声速轴流压气机性能的影响机理,分别对平行式叶尖间隙进行渐变式和阶梯式改型
优化,并利用商业软件NUMECA进行数值模拟。结果表明:对平行式叶尖间隙进行渐变式和阶梯式改型优化后,压气机性能有较
大提高,改型后 0.204-0.408的各类间隙压气机性能优于 0.408-0.204间隙的。相比较平行间隙 PTC 0.204-0.204,渐变式 TTC
0.204-0.408和阶梯式STC 0.204-0.408的失速裕度分别提高1.12%和1.61%,峰值效率基本不变,同时近失速工况下的总压比和效
率也略有提高。叶尖泄漏涡得到抑制,间隙处的流体低速区明显减小,流动损失减小,流场得到较大改善。转子通道的总压比在
85%叶高处明显提高,分别提高了1.01%和3.13%。阶梯式叶尖间隙压气机的静子通道40%叶高处总压损失系数减小达75.4%。
对平行式叶尖间隙进行改型处理能够有效提高压气机性能,且阶梯式叶尖间隙比渐变式的对压气机性能提高的效果更加显著。 相似文献