飞机起落架收放作动器的设计方案与仿真分析

为了适应飞机多电化发展需求,针对某小型飞机的起落架收放机构特点,设计了一种能源双余度、集成一体化、高比功率起落架液压作动器,提出了一种具有到位缓冲功能的单出杆对称液压缸的设计方案。基于AMESim建立了起落架液压收放器和收放机构的模型,并对起落架收放运动进行了仿真。仿真分析结果表明,所设计的能源双冗余液压系统、作动器到位缓冲结构,原理合理可行,为实际工程应用奠定了基础。     

CJ828主起落架收放机构设计与仿真

起落架系统是飞机的重要组成部分,其功能的好坏直接影响飞机的起飞和着陆性能以及飞行安全.在现代飞机起落架的各个工作部件中,收放机构在使用中发生失效的概率高达34.4％,开展起落架收放机构的研究具有极其重大的意义.根据CJ828的参数要求对主起落架的收放机构进行了优化设计,并对所设计的收放机构进行仿真计算,论证了所设计的收放机构的可行性,同时对我国未来干线飞机设计具有重要的参考价值.     

飞机起落架系统的造型,仿真与干涉分析

本文介绍了在设计飞机起落架的初期阶段，如何应用实体造型技术和机构仿真技术在微机上构造起落架系统的三维几何模型和运动模型，获得逼真的起落架系统的三维图象并实现准确的运动仿真；还提出了一套独特、方便、灵活的干涉定性、定量检测方法。全文以南飞公司某型飞机主起落架为例进行分析。     

飞机起落架全方位移动装配机器人设计与研究

起落架作为支撑飞机重量、吸收撞击能量的重要部件,在装配和试验过程中面临着装配空间狭小、装配精度高等特殊要求,急需研制一款具备可移动、多自由度调节功能的柔性装配平台。通过对起落架装配需求进行分析,设计出基于Mecanum轮的全方位移动和基于3–RPS的并联机构组成的6自由度装配机器人,详细介绍了装配机器人的结构组成、控制方法,对机器人运动学特性进行分析获得运动学模型,并进行运动学参数设置及精度分析。通过对起落架装配机器人精度测试以及实物装配,验证该机器人的功能和性能满足使用要求。     

Design and Simulation Analysis of Pneumatic Energy Capacity forEmergency Landing Gear Release of an Aircraft

为了完成飞机起落架应急放系统的设计,以某型飞机起落架应急放气压能源容量为研究对象,结合具体设计要求,完成飞机起落架应急放气压能源容量的初步设计。再结合 AMEsim 软件平台建立起落架应急放气动系统的仿真模型,对起落架应急放气压能源容量的设计参数及性能进行仿真分析。结果表明,起落架应急放气压能源容量满足设计要求,可以为飞机起落架应急放气压能源容量的设计提供一些经验和结论。     

弹性机体起落架的动态性能仿真分析

 通过建立弹性机体的等效模型,导出了系统的运动微分方程;并在ADAMS/Aircraft环境中建立了虚拟样机,仿真出具有弹性机体的飞机着陆时的动态响应。仿真结果显示出弹性机体能起到吸收和耗散能量的作用,吸收了缓冲器功量的6.5%,并可以适当减轻着陆时的侧滑过载。对考虑弹性机体起落架系统进行了研究分析,得出机体的低阶弹性模态起到提高飞机起落架缓冲器效率的作用。该设计方法能够减小轮胎和缓冲器的受载,延长起落架寿命。此外,对传统起落架缓冲器设计准则进行了完善。     

起落架数学模型及其在风场中的应用

分析了起落架地面运动特点,研究了出现横侧运动时起落架受力特点,建立了一种可用于风场且能反映起落架总体特性的起落架数学模型。数值仿真了风场中飞机的起飞、着陆、滑行、转弯等地面运动。数值仿真结果表明,该模型基本合理,可有效地模拟飞机在风场中的地面运动特点,该模型可在飞行模拟器开发中使用。     

某型飞机起落架装配机械手结构设计算法研究

针对某型飞机主起落架安装作业风险高、难度大、工艺方法落后的现状，提出一种起落架装配机械手结构设计算法，运用三维软件进行了该模型的建立和运动仿真，检验了算法的合理性，并给出了机械手具体设计指标要求，为后期进行实验研究提供了理论依据。     

基于DELMIA的飞机三维装配工艺设计与仿真

针对我国航空制造业当前装配工艺规划与设计的现状,开展了基于DELMIA进行飞机三维装配工艺设计与仿真方法的研究,对三维装配工艺设计与仿真的关键技术进行了重点分析,包括三维工艺组件划分、装配生产线布局规划、基于知识的装配工艺规划,以及装配仿真中的装配干涉检查、人机工效仿真,并通过某型飞机机翼装配对三维工艺设计与仿真进行了应用验证。     

基于虚拟样机的起落架收放系统仿真

通过建立某飞机起落架机构动力学模型和液压及控制系统模型,构建了完整的起落架收放系统的虚拟样机。基于虚拟样机,进行了起落架收放系统仿真分析,并与试验结果进行了对比。结果表明:仿真结果与试验结果基本一致,仿真模型可以用于起落架系统收放时间的模拟。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.