首页 | 本学科首页   官方微博 | 高级检索  
     

自由涡数值计算的参数影响分析
引用本文:曾洪江,胡继忠. 自由涡数值计算的参数影响分析[J]. 北京航空航天大学学报, 2006, 32(2): 176-180
作者姓名:曾洪江  胡继忠
作者单位:北京航空航天大学 航空科学与工程学院, 北京 100083
摘    要:介绍了自由涡方法中多个参数的影响,包括桨叶离散段数、有弯度翼型的涡网格密度、尾迹的长度.从桨叶根部到桨尖采用分区离散,内段区域离散稀疏,桨尖区域离散细密,根部区域的离散密度对计算结果影响不大,桨尖区域的离散密度对计算结果影响较大;采用涡网格模拟有弯度的翼型,涡网格的密度对计算结果有较大影响,但密度过大对于计算精度提高影响不大.悬停和小速度前飞状态,取9圈自由涡尾迹就能够得到较好的计算结果,爬升和大速度前飞状态下,取7圈自由涡就能够得到足够的计算精度.在上述参数中,自由涡圈数对计算时间的影响最大. 

关 键 词:直升机   旋翼空气动力   自由涡   影响参数   涡网格
文章编号:1001-5965(2006)02-0176-05
收稿时间:2005-01-20
修稿时间:2005-01-20

Parameter influence analysis of free-wake numerical method
Zeng Hongjiang,Hu Jizhong. Parameter influence analysis of free-wake numerical method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(2): 176-180
Authors:Zeng Hongjiang  Hu Jizhong
Affiliation:School of Aeronautic Science and Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
Abstract:The parameter influence of rotor free-wake method was presented,including blade discrete segments,vortices grid density and wake length.Several areas were made from blade root to blade tip.The inside area was segmented coarsely but the tip area was segmented more densely.The segment density of inside area has lower influence on the numerical result than that of tip area.Vortices were used to model unsymmetrical aerofoil.The density of vortices can affect the numerical result obviously.Proper density is needed and too dense vortices grid can not improve the accuracy of numerical result.For the hover and low speed flight state,9 loops of wake is enough to get accurate numerical result,and for climb and high speed flight state 7 loops of wake is enough.The influence of time cost of these parameters was also discussed and wake length has the most influence.
Keywords:helicopter  rotor aerodynamics  free wake  parameter influence  vortices grid
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《北京航空航天大学学报》浏览原始摘要信息
点击此处可从《北京航空航天大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号