| 气膜孔形状对排孔下游换热的影响 |
| |
| 引用本文： | 朱惠人,许都纯,郭涛,刘松龄. 气膜孔形状对排孔下游换热的影响[J]. 航空动力学报, 2001, 16(4): 360-364 |
| |
| 作者姓名： | 朱惠人 许都纯 郭涛 刘松龄 |
| |
| 作者单位： | 西北工业大学706教研室,陕西西安710072 |
| |
| 摘 要： | 实验研究了气膜孔几何形状、二次流雷诺数及吹风比对孔排下游的局部换热系数的影响。所用孔形是簸箕形孔、圆锥形孔及圆柱形孔;实验的参数范围为二次流孔径雷诺数Re=10000～25000,二次流吹风比M=0.3～2.0,在上述范围选取了26个工况分别对3种孔形进行了实验。
|
| 关 键 词： | 簸箕形孔 圆锥形孔 换热系数 实验 气膜冷却 |
| 文章编号： | 1000-8055(2001)04-0360-05 |
| 收稿时间： | 2000-10-06 |
| 修稿时间： | 2000-10-06 |
Effects of Film Cooling Hole Shape on Heat Transfer |
| |
| ZHU Hui-ren,XU Du-chun and LIU Song-lin. Effects of Film Cooling Hole Shape on Heat Transfer[J]. Journal of Aerospace Power, 2001, 16(4): 360-364 |
| |
| Authors: | ZHU Hui-ren XU Du-chun LIU Song-lin |
| |
| Affiliation: | 7th Dept., Northwest Polytechnic University, Xi'an710072, China |
| |
| Abstract: | The Effects of hole shapes,secondary flow Reynolds numbers,and blowing ratio on the heat transfer downstream of film cooling holes have been investigated.Experiments on dust-pan shaped holes,cone-shaped holes and round holes have been conducted with secondary flow Reynolds number ranging from 10,000 to 25,000 and blowing rate ranging from 0 3 to 2 0.Measurements are taken for 26 conditions.Results show that the critical blowing ratio is 1 3 for the dust-pan shaped holes and cone-shaped holes,0 7 for the round holes.The turbulence provided by jet from round holes is greater than that from dust-pan shaped holes and cone-shaped holes. |
| |
| Keywords: | film cooling thermo-convection coefficient dust-pan shaped hole cone-shaped hole experimental |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
|
