| 扩散界面浸入边界法结合壁面模型在湍流模拟中的应用 |
| |
| 引用本文： | 杜银杰,舒昌,杨鲤铭,王岩,吴杰. 扩散界面浸入边界法结合壁面模型在湍流模拟中的应用[J]. 航空学报, 2021, 42(z1): 726361-726361. DOI: 10.7527/S1000-6893.2021.26361 |
| |
| 作者姓名： | 杜银杰 舒昌 杨鲤铭 王岩 吴杰 |
| |
| 作者单位： | 1. 南京航空航天大学 航空学院 空气动力学系, 南京 210016;2. 新加坡国立大学 机械工程系, 新加坡 117576 |
| |
| 基金项目： | 国家数值风洞项目（NNW2019ZT2-B28）；国家自然科学基金（11772157）；江苏高校优势学科建设工程资助项目（PAPD） |
| |
| 摘 要： | 提出了一种模拟高雷诺数湍流的扩散界面浸入边界法（IBM）。该方法采用壁面模型来减少壁面附近的网格量。为了实施壁面模型和边界条件，在物面外部设置了2个辅助层（一系列拉格朗日点）：外侧的参考层用于实施壁面模型来得到壁面剪应力，内侧的强制层用于实施离壁的边界条件。在实施壁面模型时，将动量方程沿物面法向积分，从而把物面切向的速度修正量与由壁面模型得到的壁面剪应力联系起来，而速度的法向分量则按二次曲线分布来近似重构。在实施边界条件时，为了严格满足无穿透条件，应用了基于隐式速度修正的IBM。最后，利用绕平板湍流和绕NACA0012翼型湍流来对方法的可行性进行了验证。
|
| 关 键 词： | 浸入边界法 壁面模型 扩散界面 湍流 不可压流动 |
| 收稿时间： | 2021-09-01 |
| 修稿时间： | 2021-09-14 |
Wall model based diffuse-interface immersed boundary method and its application in turbulent flows |
| |
| DU Yinjie,SHU Chang,YANG Liming,WANG Yan,WU Jie. Wall model based diffuse-interface immersed boundary method and its application in turbulent flows[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(z1): 726361-726361. DOI: 10.7527/S1000-6893.2021.26361 |
| |
| Authors: | DU Yinjie SHU Chang YANG Liming WANG Yan WU Jie |
| |
| Affiliation: | 1. Department of Aerodynamics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;2. Department of Mechanical Engineering, National University of Singapore, Singapore 117576, Singapore |
| |
| Abstract: | A diffuse-interface Immersed Boundary Method (IBM) for simulating high Reynolds number turbulent flows is proposed. This method uses the wall model to reduce the number of grids near the wall. To implement the wall model and boundary conditions, two auxiliary layers (a series of Lagrangian points) are set outside the wall: the outer reference layer carries out the wall model to calculate the wall shear stress, and the inner enforced layer implements boundary conditions off the wall. When the wall model is implemented, the momentum equation is integrated along the normal direction of the wall, such that the tangential velocity correction is related to the wall shear stress obtained by the wall model, and the normal component of the velocity is approximately reconstructed according to the parabolic distribution. Furthermore, when implementing boundary conditions, we adopt the implicit velocity correction-based IBM to satisfy the non-penetration condition. Finally, the feasibility of this method is verified by numerical simulation of the turbulent flows around the flat plate and the NACA0012 airfoil. |
| |
| Keywords: | immersed boundary method wall model diffuse-interface turbulent flow incompressible flow |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《航空学报》浏览原始摘要信息 |
|
点击此处可从《航空学报》下载全文 |
|
