| 离心叶轮全三维反问题方法设计误差稳定性研究 |
| |
| 引用本文： | 田晓沛,单鹏. 离心叶轮全三维反问题方法设计误差稳定性研究[J]. 航空动力学报, 2016, 31(5): 1159-1169. DOI: 10.13224/j.cnki.jasp.2016.05.018 |
| |
| 作者姓名： | 田晓沛 单鹏 |
| |
| 作者单位： | 1. 中国航空工业集团公司 中航空天发动机研究院有限公司 基础研究中心, 北京 101304; |
| |
| 摘 要： | 用流线曲率全三维反问题方法和引入滑移因子模型的准三维流线曲率反问题方法设计了叶片数不同的和增压比不同的小型高速离心叶轮.用商用计算流体力学(CFD)求解器估算了这些叶轮的性能.对比了这两种反问题方法的设计误差稳定性,考察了分流叶片对设计误差的影响.结果表明,流线曲率全三维反问题方法能够根据叶片负荷对叶片设计做出恰当调整.较准三维反问题方法,流线曲率全三维反问题方法所设计叶轮的增压比普遍偏高.随叶片负荷增加,较准三维反问题方法,流线曲率全三维反问题方法的设计误差变化较小,即其设计误差稳定性明显较好.分流叶片对准三维反问题方法设计结果的影响明显较小.
|
| 关 键 词： | 设计误差稳定性 离心压气机 通流设计 流线曲率法 全三维反问题 数值研究 |
| 收稿时间： | 2015-06-12 |
Numerical study on the design error stabilities of 3-dimensional streamline curvature inverse method for centrifugal impellers |
| |
| TIAN Xiao-pei and SHAN Peng. Numerical study on the design error stabilities of 3-dimensional streamline curvature inverse method for centrifugal impellers[J]. Journal of Aerospace Power, 2016, 31(5): 1159-1169. DOI: 10.13224/j.cnki.jasp.2016.05.018 |
| |
| Authors: | TIAN Xiao-pei and SHAN Peng |
| |
| Affiliation: | 1. Basic Technology Research Center, Academy of Aeronautic Propulsion Technology, Aviation Industry Corporation of China, Beijing 101304, China;2. School of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | Two groups of the high speed centrifugal impellers were both designed by the 3-dimensional streamline curvature inverse method and a quasi-3-dimensional inverse method with a slip factor model. One group had different blade numbers, while the other group had different total pressure ratios. The impeller performances were predicted by a commercial computational fluid dynamics (CFD) solver. The design error stabilities of the two methods were compared. The impacts of the splitter blades on the design errors were also studied. The results showed that the 3-dimensional streamline curvature inverse method could realize a proper adjustment to the blade shape according to the blade loading. And compared with the quasi-3-dimensional inverse method, the total pressure ratios of the impellers designed by the 3-dimensional streamline curvature inverse method were generally higher. Therefore, with the increase of blade loading, the design errors of the 3-dimensional streamline curvature inverse method changed much smaller than those of the quasi-3-dimensional inverse method; namely, the design error stability of the 3-dimensional streamline curvature inverse method was much better. In addition, for the quasi-3-dimensional method, the impacts of the splitter blades on the blade design results were much smaller. |
| |
| Keywords: | design error fluctuation centrifugal compressor through-flow design streamline curvature approach three-dimensional inverse problem numerical study |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
|
