| 航空发动机安装边螺栓连接密封特性试验 |
| |
| 引用本文： | 艾延廷,来纯强,郝燕平,孙丹,吴立夫. 航空发动机安装边螺栓连接密封特性试验[J]. 航空动力学报, 2018, 33(10): 2315-2323. DOI: 10.13224/j.cnki.jasp.2018.10.002 |
| |
| 作者姓名： | 艾延廷 来纯强 郝燕平 孙丹 吴立夫 |
| |
| 作者单位： | 1.沈阳航空航天大学 航空航天工程学部（院） 辽宁省航空推进系统先进测试技术重点实验室，沈阳 110136 |
| |
| 基金项目： | 国家自然科学基金（51675351）；航空基金（20140454003）；辽宁省自然科学基金（2015020113） |
| |
| 摘 要： | 通过试验的方法对影响安装边螺栓连接结构密封特性的因素进行了系统分析与研究，设计和搭建了安装边螺栓连接密封特性试验系统，研究了螺栓加载方案、预紧力和螺栓数量对安装边密封特性的影响规律。研究表明:JIS B 2251加载方案可以获得更均匀的预紧力，与其他方案相比，气体泄漏持续的时间长，达到600s，且加载工作量小；增大预紧力可使压力下降的持续时间增加，从6.0kN的400s至7.5kN的540s和9.0kN的650s；螺栓数量的增加使得t=0时刻的泄漏率从2.6cm3/s降到1.7cm3/s，从而提升试验件的密封性能。该研究可为安装边密封特性分析与结构设计提供参考。
|
| 关 键 词： | 螺栓连接 密封特性 加载方案 预紧力 航空发动机 |
| 收稿时间： | 2017-05-31 |
Experiment on sealing characteristics of bolted flanged connections for aero-engines |
| |
| Abstract: | The leakage factors of the bolted flanged connections were analyzed systematically and studied experimentally. The experimental system of sealing characteristics of bolted flanged connections was designed and constructed to study the influences of bolt loading method, preload and number of bolts on the sealing characteristics of flange connection. The results show that the loading method of JIS B 2251 can obtain more uniform preload, the gas leakage lasts longer than other methods up to 600s, and the workload is smaller; increasing the preload can increase the duration of the pressure drop, from 400s of 6.0kN to 540s of 7.5kN and 650s of 9.0kN. The increase in the number of bolts makes the leakage rate of the t=0 moment drop from 2.6cm3/s to 1.7cm3/s, thereby improving the sealing performance of the experimental piece. This study can provide a reference for the sealing characteristic analysis and structural design of bolted flanged connections. |
| |
| Keywords: | bolt connection sealing characteristics loading method preload aero-engines |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《航空动力学报》浏览原始摘要信息 |
|
点击此处可从《航空动力学报》下载全文 |
