| 旋成体表面沟槽减阻试验研究 |
| |
| 引用本文： | 陈莹,陈迎春,黄炜,胡仞与,姚开明,王福新. 旋成体表面沟槽减阻试验研究[J]. 实验流体力学, 2012, 26(2): 42-45. DOI: 10.3969/j.issn.1672-9897.2012.02.009 |
| |
| 作者姓名： | 陈莹 陈迎春 黄炜 胡仞与 姚开明 王福新 |
| |
| 作者单位： | 上海飞机设计研究院,上海,200235 |
| |
| 摘 要： | 在旋成体模型表面粘贴铝基沟槽蒙皮,研究沟槽表面对模型阻力的影响.给出基于来流单位雷诺数的沟槽尺寸无量纲公式,用于设计沟槽齿高和齿宽,依据试验风洞的单位雷诺数范围,选定3种尺寸的沟槽进行减阻试验.结果表明,在旋成体表面湍流流动区域顺流向布置沟槽,当沟槽齿高和齿宽的无量纲值h+、s+均小于25时,在小迎角下具有减阻作用,当s+约为15时减阻效果最明显,可减小约3%~4%的阻力.
|
| 关 键 词： | 旋成体 减阻 沟槽 风洞试验 |
Experiment investigation of drag reduction using riblets for a slender body |
| |
| CHEN Ying , CHEN Ying-chun , HUANG Wei , HU Ren-yu , YAO Kai-ming , WANG Fu-xin. Experiment investigation of drag reduction using riblets for a slender body[J]. Experiments and Measur in Fluid Mechanics, 2012, 26(2): 42-45. DOI: 10.3969/j.issn.1672-9897.2012.02.009 |
| |
| Authors: | CHEN Ying CHEN Ying-chun HUANG Wei HU Ren-yu YAO Kai-ming WANG Fu-xin |
| |
| Affiliation: | 1.Shanghai Aircraft Design Research Institute,Shanghai 200235,China;2.Shanghai Jiao Tong University,Shanghai 200240,China) |
| |
| Abstract: | To evaluate the drag reduction effect of riblet technology,aluminum fairings with riblet surface are applied on a slender body and investigated in wind tunnel test.For optimizing riblet height and space efficiently,normalized geometry parameters based on free stream unit Reynolds number are adopted in this article and three different riblet geometries are chosen for test,considering the range of wind tunnel’s unit Reynolds number.According to the test result,with riblet allocated in turbulence area and along free stream direction,drag reduction effect can be observed in lower angle of attack conditions if normalized parameters h+ and s+ are no more than 25.The maximum drag reduction of 3%~4% can be achieved when s+ is about 15. |
| |
| Keywords: | slender body drag reduction riblet wind tunnel test |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《实验流体力学》浏览原始摘要信息 |
|
点击此处可从《实验流体力学》下载全文 |
|
