首页 | 本学科首页   官方微博 | 高级检索  
     

压气机转子通道内尖区三维平均流场
引用本文:马宏伟,蒋浩康. 压气机转子通道内尖区三维平均流场[J]. 航空动力学报, 1997, 12(2): 167-171,220
作者姓名:马宏伟  蒋浩康
作者单位:北京航空航天大学
摘    要:在低速大尺寸压气机试验台上,借助旋转四坐标全电动探针位移机构,用锥形五孔压力探针分别测量压气机设计状态和近失速状态转子通道内尖区的三维平均流场,揭示压气机转子通道内尖部的流动结构及其变化

关 键 词:压气机   转子   端部效应   三维边界层
收稿时间:1996-04-01
修稿时间:1996-08-01

THREE-DIMENSIONAL FLOW FIELD INSIDE A COMPRESSOR ROTOR TIP REGION
Ma Hongwei and Jiang Haokang. THREE-DIMENSIONAL FLOW FIELD INSIDE A COMPRESSOR ROTOR TIP REGION[J]. Journal of Aerospace Power, 1997, 12(2): 167-171,220
Authors:Ma Hongwei and Jiang Haokang
Affiliation:4th Dept.Beijing University of Aeronautics and Astronautics, Beijing 100083
Abstract:An experimental study of the three-dimensional flow field inside the tip region of a low-speed,large-scale axial-flow compressor rotor has been completed.With the help of a rotating four-coordinate probe traverse mechanism,the measurements were conducted with a five-hole conical probe in both design condition and near stall condition.The results indicate that the tip leakage vortex plays a decisive role in the tip region flow in the design condition,leading to substantial flow loss and blockage in the passage.In near stall condition,flow separation occurs on the blade suction surface while radial migration of the boundary layer on the suction surface is strong,which makes more low-energy fluid accumulate at the corner between the casing annual wall and the suction surface.A corner vortex is induced by the tip leakage flow, and the low-energy fluid migrates to the pressure side due to the effect of the leakage vortex.Strong flow mixing among the corner vortex,the leakage vortex,the boundary layer on the casing wall and the main flow occurs at median part of the passage,which leads to substantial deficiencies of relative total pressure and relative velocity.
Keywords:Compressors Rotors Three-dimensional boundary layer  
本文献已被 CNKI 等数据库收录!
点击此处可从《航空动力学报》浏览原始摘要信息
点击此处可从《航空动力学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号