| 瞬态传热问题的微分求积和精细积分求解方法 |
| |
| 引用本文： | 金晶,邢誉峰,廖选平,张海瑞,唐念华. 瞬态传热问题的微分求积和精细积分求解方法[J]. 北京航空航天大学学报, 2015, 41(8): 1526-1531. DOI: 10.13700/j.bh.1001-5965.2014.0626 |
| |
| 作者姓名： | 金晶 邢誉峰 廖选平 张海瑞 唐念华 |
| |
| 作者单位： | 1.中国运载火箭技术研究院, 北京 100076 |
| |
| 摘 要： | 给出了瞬态传热问题的高效高精度求解方法,该方法分别用微分求积法(DQM)和精细积分法(PIM)离散空间域和时间域.微分求积方法除了精度高、效率高之外,处理复杂边界条件的灵活性也优于有限元法(FEM).用精细积分法处理一阶瞬态传热微分控制方程,不需要增加额外自由度,还可以达到计算机精度.给出了隔热结构4种边界条件下的数值结果.并就上表面恒温、其他面绝热边界条件计算结果与有限元分析结果进行了对比,算例分析表明,采用微分求积和精细积分法布置少量的节点就可以达到较高的精度.
|
| 关 键 词： | 微分求积法(DQM) 精细积分法(PIM) 瞬态传热问题 有限元法(FEM) 时间域 空间域 |
| 收稿时间： | 2014-10-13 |
Application of differential quadrature and precise integration methods in analysis of transient heat transfer |
| |
| JIN Jing,XING Yufeng,LIAO Xuanping,ZHANG Hairui,TANG Nianhua. Application of differential quadrature and precise integration methods in analysis of transient heat transfer[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(8): 1526-1531. DOI: 10.13700/j.bh.1001-5965.2014.0626 |
| |
| Authors: | JIN Jing XING Yufeng LIAO Xuanping ZHANG Hairui TANG Nianhua |
| |
| Affiliation: | 1.China Academy of Launch Vehicle Technology, Beijing 100076, China2. School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China3. College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China |
| |
| Abstract: | An accurate and efficient solution method of the governing equation of transient heat transfer was proposed based on the differential quadrature method (DQM) and precise integration method (PIM). DQM was applied to discretize spatial domain while PIM to temporal domain. It has been shown that DQM, with high accuracy and efficiency, also had higher flexibility than the finite element method (FEM) while dealing with complicated boundary conditions. The transient heat transfer is governed by the first-order differential equation with respect to time,while applying precise integration method in temporal domain,the same accuracy as computer can be achieved without increasing additional degrees of freedom. Numerical results were given for four kinds of boundary conditions of thermal protection structure. Then, the numerical result of the structure with constant temperature on top surface and heat insulation on other surfaces was compared with the result using the FEM. The numerical examples analysis shows that the higher precision can be achieved with fewer nodes by DQM and PIM. |
| |
| Keywords: | differential quadrature method (DQM) precise integration method (PIM) transient heat transfer problem finite element method (FEM) temporal domain spatial domain |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
|
点击此处可从《北京航空航天大学学报》下载全文 |
|
