| 一种自由曲面视觉测量三维数据拼接方法 |
| |
| 引用本文： | 谢光辉,孙军华,杨珍,张广军.一种自由曲面视觉测量三维数据拼接方法[J].北京航空航天大学学报,2009,35(7):877-881. |
| |
| 作者姓名： | 谢光辉 孙军华 杨珍 张广军 |
| |
| 作者单位： | 北京航空航天大学,仪器科学与光电工程学院,北京,100191;北京航空航天大学,仪器科学与光电工程学院,北京,100191;北京航空航天大学,仪器科学与光电工程学院,北京,100191;北京航空航天大学,仪器科学与光电工程学院,北京,100191 |
| |
| 基金项目： | 国家自然科学基金资助项目(50727502);;高等学校博士学科点专项科研基金资助项目(200800061003);;教育部创新团队发展计划资助项目(IRT0705) |
| |
| 摘 要： | 提出一种利用标志点构建全局测量控制点的视觉测量三维数据拼接方法.在被测自由曲面上粘贴标志点,并在被测区域放置基线尺,采用1台数码相机在不同视点拍摄标记点和基线尺图像,由此求解数码相机在不同视点的坐标系变换关系.在此基础上,根据立体视觉模型确定标志点三维坐标,转换到全局坐标系下,形成全局测量控制点.视觉传感器在不同位置对各局部区域进行三维扫描,获得局部区域内标志点在局部测量坐标系下的坐标,通过至少3个非共线标志点解算局部坐标系到全局坐标系的变换,从而将实现局部三维数据的拼接.该方法操作简便,适合现场使用.实验结果表明, x,y,z 坐标的拼接误差分别为0.03mm,0.02mm,0.07mm.
|
| 关 键 词： | 视觉测量 三维拼接 标志点 基线尺 数码相机 |
| 收稿时间： | 2008-06-06 |
3D data registration method for vision measurement |
| |
| Xie Guanghui,Sun Junhua,Yang Zhen,Zhang Guangjun.3D data registration method for vision measurement[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(7):877-881. |
| |
| Authors: | Xie Guanghui Sun Junhua Yang Zhen Zhang Guangjun |
| |
| Institution: | School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | A 3D data registration method was proposed for vision measurement using mark points as global measurement control points.Mark points were attached to the measured objects and one or more baseline rulers were put in the measured area.The images of mark points and the baseline rulers were captured by a digital camera from different viewpoints,by which the coordinate frame transformations between viewpoints were estimated.Using the stereo vision model,the local coordinates of the mark points were determined,an... |
| |
| Keywords: | vision measurement 3D registration mark points baseline ruler digital camera |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
|
