|
|||||
|
|
| 制孔工艺对7075铝合金孔表面完整性的影响 | |
| 引用本文： | 裴旭明,陈五一,任炳义,韩誉.制孔工艺对7075铝合金孔表面完整性的影响[J].北京航空航天大学学报,2002,28(3):319-322. |
| 作者姓名： | 裴旭明 陈五一 任炳义 韩誉 |
| 作者单位： | 1. 北京航空航天大学,机械工程及自动化学院;2. 成都飞机设计研究所;3. 成都飞机工业公司 |
| 摘 要： | 从表面完整性角度研究了5种制孔工艺对7075铝合金板材紧固孔表面加工质量的影响,通过对不同种工艺所产生的紧固孔表面粗糙度、残余应力和显微硬度进行检测和比较,发现钻扩铰多步慢进给工艺和钻扩铰一步复合制孔工艺所达到的表面完整性指标优于其它加工工艺.另外分析了影响孔加工质量的因素,证明了一步复合制孔工艺是一种先进、快捷的高质量制孔方法. |
| 关 键 词： | 表面粗糙度 残余应力 加工硬化 钻孔质量 表面完整性 |
| 文章编号： | 1001-5965(2002)03-0319-04 |
| 收稿时间： | 2000-09-29 |
| 修稿时间： | 2000年9月29日 |
Effect of Drilling Processes on Surface Integrity of 7075-Aluminum Alloy Holes |
|
| PEI Xu-ming,CHEN Wu-yi,REN Bing-yi,HAN Yu.Effect of Drilling Processes on Surface Integrity of 7075-Aluminum Alloy Holes[J].Journal of Beijing University of Aeronautics and Astronautics,2002,28(3):319-322. | |
| Authors: | PEI Xu-ming CHEN Wu-yi REN Bing-yi HAN Yu |
| Institution: | 1. Beijing University of Aeronautics and Astronautics, School of Mechanical Engineering and Automation; 2. Chengdu Aircraft Design &; Research Institute; 3. Chengdu Aircraft Industry Co. |
| Abstract: | Effect of the five drilling processes on the surface quality of fastening holes of 7075 aluminum alloy plate used in aircraft structures was investigated with the respect of surface integrity. By measuring and comparing of surface roughness, residual stress and micro hardness, it was found that the surface integrity of holes obtained by multiple step machining with slow feed and by one step compound machining were superior to that obtained by the other three drilling processes. In addition, factors influencing surface conditions were analyzed, and it was proved that one step compound machining was an advanced and fast drilling method with high quality. |
| Keywords: | surface roughness residual stress work hardening drilling quality surface integrity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 | |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 | |