| 航空发动机机匣损伤容限评估及剩余寿命预测 |
| |
| 引用本文： | 秦丽晔,吴素君,赵海涛,刘颖.航空发动机机匣损伤容限评估及剩余寿命预测[J].北京航空航天大学学报,2011,37(7):895-900. |
| |
| 作者姓名： | 秦丽晔 吴素君 赵海涛 刘颖 |
| |
| 作者单位： | 北京航空航天大学材料科学与工程学院,北京,100191;北京航空制造工程研究所,北京,100024 |
| |
| 摘 要： | 使用有限元的方法,建立了某航空发动机机匣安装座处局部模型,计算得到了不同尺寸裂纹的应力强度因子的形状因子Y.基于BS7910评定方法,利用失效评估图(FAD,Failure Assessment Diagram)确定了机匣安装座结构在工作应力下的可接受裂纹尺寸为84.8 mm,结构的剩余强度随裂纹尺寸的增加而显著降低,焊缝较母材具有更低的损伤容限和剩余强度.使用缩小宽度模拟验证件模拟工作状态载荷进行了验证试验,当裂纹尺寸与试样宽度比值较小时,与模拟验证件的评估结果基本吻合.根据Paris公式,构件在工作应力下的剩余寿命为74 238周次.
|
| 关 键 词： | 损伤容限 焊接接头 疲劳裂纹扩展 |
| 收稿时间： | 2010-07-08 |
Determination of damage tolerance and remaining life for aeroengine crankcase |
| |
| Qing Liye Wu Sujun Zhao Haitao Liu Ying.Determination of damage tolerance and remaining life for aeroengine crankcase[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(7):895-900. |
| |
| Authors: | Qing Liye Wu Sujun Zhao Haitao Liu Ying |
| |
| Institution: | 1. School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;
2. Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China |
| |
| Abstract: | In order to ensure the safety of aircraft,fracture assessment for an aeroengine crankcase was carried out.Based on finite element method,a model for the local crankcase fitting seat was established and the geometry factor Y for different crack lengths was obtained.Using the procedure of BS7910,crankcase damage tolerance was calculated and verified by test,the critical allowable crack length is 84.8 mm and the remaining strength decreases with the increase of crack length.The allowable crack dimension and re... |
| |
| Keywords: | damage tolerance welds fatigue crack propagation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
|
