| 三维公差分析中工程尺寸驱动原理与应用 |
| |
| 引用本文： | 郑洪涌,郑国磊,赵皇进.三维公差分析中工程尺寸驱动原理与应用[J].北京航空航天大学学报,2012,38(1):138-142. |
| |
| 作者姓名： | 郑洪涌 郑国磊 赵皇进 |
| |
| 作者单位： | 北京航空航天大学机械工程及自动化学院,北京,100191;北京航空航天大学机械工程及自动化学院,北京,100191;北京航空航天大学机械工程及自动化学院,北京,100191 |
| |
| 摘 要： | 由于产品标注的工程尺寸和建模参数之间存在差异,参数化驱动技术在公差分析中的应用范围受到限制,提出了基于工程尺寸驱动技术的公差分析方法.将传统尺寸转化为产品模型上几何元素之间的约束关系,分析工程尺寸集和建模参数集之间的映射机理;把工程尺寸的驱动问题转化为非线性方程组的求解问题,并采用牛顿迭代法进行计算.这些方法在UG系统上得以实现,并通过实例分析进行了验证.
|
| 关 键 词： | 公差分析 工程尺寸 尺寸约束 参数化驱动 |
| 收稿时间： | 2010-09-27 |
Principle and application of functional dimension driving in 3D tolerance analysis |
| |
| Zheng Hongyong,Zheng Guolei,Zhao Huangjin.Principle and application of functional dimension driving in 3D tolerance analysis[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(1):138-142. |
| |
| Authors: | Zheng Hongyong Zheng Guolei Zhao Huangjin |
| |
| Institution: | School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China |
| |
| Abstract: | As the differences between functional dimensions and modeling parameters of the product bring limitations on the application of parameter-driven technique in tolerance analysis, a method based on functional dimension-driven technique was presented. Traditional dimensions were defined by constraints between geometric elements of the product model, and the mapping mechanism between functional dimension set and modeling parameter set was analyzed. The problem of functional dimension driven was converted to the solution of a set of non-linear equations, which was then solved by Newton's method. These methods were implemented on the UG system, and applied to analyze a selected mechanism. |
| |
| Keywords: | tolerance analysis functional dimension dimension constraint parameter driven |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京航空航天大学学报》浏览原始摘要信息 |
| 点击此处可从《北京航空航天大学学报》下载免费的PDF全文 |
|
