| 侧壁开孔管式点火器点火热流与固体药柱表面间传热 |
| |
| 引用本文： | 钟涛,王中伟,张为华.侧壁开孔管式点火器点火热流与固体药柱表面间传热[J].推进技术,2005,26(4):360-363. |
| |
| 作者姓名： | 钟涛 王中伟 张为华 |
| |
| 作者单位： | 国防科技大学,航天与材料工程学院,湖南,长沙,410073 |
| |
| 基金项目： | 国家“八六三”高技术项目资助（2002AA765030）. |
| |
| 摘 要： | 分析了固体火箭发动机侧壁开孔长管式点火器点火热流与固体药柱表面间传热机理，根据轴对称边界层原理，借鉴平面间阵列圆孔射流传热模型，在考虑管式点火器与药柱表面同轴圆面间射流传热过程的基础上推导得到传热系数表达式，仿真研究表明模型合理，能对试验现象进行合理解释。
|
| 关 键 词： | 固体火箭发动机 点火 射流 推进剂药柱 传热 |
| 文章编号： | 1001-4055（2005）04-0360-04 |
| 收稿时间： | 2004-08-12 |
| 修稿时间： | 2004年8月12日 |
Analysis for the heat transfer between solid propellant surface and heat flux of igniter with side holes |
| |
| ZHONG Tao,WANG Zhong-wei and ZHANG Wei-hua.Analysis for the heat transfer between solid propellant surface and heat flux of igniter with side holes[J].Journal of Propulsion Technology,2005,26(4):360-363. |
| |
| Authors: | ZHONG Tao WANG Zhong-wei and ZHANG Wei-hua |
| |
| Institution: | Inst. of Aerospace and Material Engineering,National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering,National Univ. of Defence Technology, Changsha 410073, China;Inst. of Aerospace and Material Engineering,National Univ. of Defence Technology, Changsha 410073, China |
| |
| Abstract: | The heat transfer mechanism between the solid propellant surface and heat flux of long igniter with side holes was analyzed. A array round nozzle jet heat transferring model between co-axis round surfaces was built. The heat transfer coefficient according to the theory of axisymmetric boundary layer was deduced. Simulation results validated the model and explained some phenomena of experiment. |
| |
| Keywords: | Solid propellant rocket engine Ignition Jet flow Propellant grain Heat transfer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《推进技术》浏览原始摘要信息 |
| 点击此处可从《推进技术》下载免费的PDF全文 |
