首页 | 本学科首页   官方微博 | 高级检索  
     检索      

大后翼装药固体发动机喷管收敛段绝热层烧蚀
引用本文:刘中兵,汪亮,胡春波.大后翼装药固体发动机喷管收敛段绝热层烧蚀[J].推进技术,2009,30(1):72-76.
作者姓名:刘中兵  汪亮  胡春波
作者单位:西北工业大学,航天工程学院,陕西,西安,710072
摘    要:对具有大后翼装药结构的Φ315 mm发动机和全尺寸发动机进行了地面点火试验。试验后对喷管收敛段绝热层按照沟槽和非沟槽部位进行了解剖,得出了各个部位绝热层的烧蚀和炭化数据。结果表明,和药柱翼槽对应的喷管收敛段绝热层烧蚀严重,而非药柱翼槽对应部位的绝热层烧蚀较小。实测的最大烧蚀率可用于同类发动机的方案设计。

关 键 词:固体推进剂火箭发动机  点火试验  烧蚀  装药  绝热层

Ablation of nozzle convergent section insulation of solid rocket motors with long aft-finocyl grain
LIU Zhong-bing,WANG Liang and HU Chun-bo.Ablation of nozzle convergent section insulation of solid rocket motors with long aft-finocyl grain[J].Journal of Propulsion Technology,2009,30(1):72-76.
Authors:LIU Zhong-bing  WANG Liang and HU Chun-bo
Institution:(Coll.of Astronautics,Northwestern Polytechnical Univ.,Xi’an 710072,China)
Abstract:The ground firing tests of Φ315 mm motor and full-scale motor with long aft finocyl grain were performed.The nozzle convergent section insulation was dissected respectively according to groove section and non-groove section.The depth of ablation and charring layers was obtained.The results show that the ablation of the nozzle convergent section insulation corresponding grain fin-slots is high and the ablation corresponding grain non-fin-slots is low.The maximum ablation rate measured may be applied to design of the same kind of motors.
Keywords:Solid propellant rocket engine  Ignition test  Ablation  Charge  Heat insulation layer
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《推进技术》浏览原始摘要信息
点击此处可从《推进技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号