首页 | 本学科首页   官方微博 | 高级检索  
     检索      

合成射流与横向主流作用的流场数值分析
引用本文:王德全,夏智勋,罗振兵,胡建新,赵建民,缪万波.合成射流与横向主流作用的流场数值分析[J].空气动力学学报,2007,25(1):92-96.
作者姓名:王德全  夏智勋  罗振兵  胡建新  赵建民  缪万波
作者单位:国防科技大学航天与材料工程学院,湖南,长沙,410073
基金项目:国家自然科学基金资助项目(批准号:50176055),国家自然科学基金重大研究计划资助项目(批准号:90205016)
摘    要:建立了将合成射流激励器腔体、出口喉道、外部流场作为单连域计算处理的吹/吸型边界模型。在此基础上,对横向主流偏转角及上下壁面压力变化进行了讨论。计算结果表明,激励器布置位置是影响主流偏转角的重要因素,在主流通道内侧,激励器与主流出口之间的上下壁面压力差较大。文中还对两种不同模式下合成射流对主流的控制效果做了比较。

关 键 词:激励器  模式  合成射流  数值模拟  横向主流
文章编号:0258-1825(2007)01-0092-05
修稿时间:2006-01-132006-04-25

Numerical simulation of flow fields of synthetic jet and across primary jet
WANG De-quan,XIA Zhi-xun,LUO Zhen-bing,HU Jian-xin,ZHAO Jian-min,MIAO Wan-bo.Numerical simulation of flow fields of synthetic jet and across primary jet[J].Acta Aerodynamica Sinica,2007,25(1):92-96.
Authors:WANG De-quan  XIA Zhi-xun  LUO Zhen-bing  HU Jian-xin  ZHAO Jian-min  MIAO Wan-bo
Institution:College of Aerospace and Material Engineering, National University of Defense Technology, Changsha Hunan 410073, China
Abstract:Modeling a blowing/suction type boundary for synthetic jet actuator,it considers the actuator cavity,exit nozzle and exterior flow field as a single computational region.Then the vectoring angle of the across primary jet and the different pressure on each wall are discussed.It shows that the vectoring angle of the across primary jet is affected mainly by the locations of actuator,and in the primary jet channels the pressure difference on the walls between actuator and exit of primary jet is especially great.The synthetic jet's effect on primary jet under different mode is discussed in the paper.
Keywords:actuator  mode  synthetic jet  numerical simulation  across primary jet
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号