首页 | 本学科首页   官方微博 | 高级检索  
     检索      

复合材料层板低速冲击剩余强度的研究
引用本文:燕瑛,曾东.复合材料层板低速冲击剩余强度的研究[J].航空学报,2003,24(2):137-139.
作者姓名:燕瑛  曾东
作者单位:北京航空航天大学,飞行器设计与应用力学系,北京,100083
基金项目:国家自然科学基金资助项目 ( 5 0 0 73 0 0 2 )
摘    要: 针对复合材料层板受低速冲击后的剩余压缩强度问题进行分析计算,把冲击破坏区看作一个含有随机分布裂纹的圆形不均匀体,采用有限元建模分析,结合冲击后层板的试验所得的载荷/ 位移关系,计算得到冲击破坏区的剩余模量。再采用有限元建模分析含圆形冲击损伤区的矩形复合材料层板,求解应力及最大位移,并依据最大应力破坏准则,预测复合材料层板的冲击后压缩强度,计算结果与试验数据的比较表明分析结果可靠。

关 键 词:复合材料层板  低速冲击  剩余压缩强度  剩余模量  有限元分析  试验数据  
文章编号:1000-6893(2003)02-0137-03
修稿时间:2002年3月18日

Study on the Post-Impact Compressive Strength of Composite Laminates
YAN Ying,ZENG Dong.Study on the Post-Impact Compressive Strength of Composite Laminates[J].Acta Aeronautica et Astronautica Sinica,2003,24(2):137-139.
Authors:YAN Ying  ZENG Dong
Institution:Department of Flight Vehicle Design and Applied Mechanics; Beijing University of Aeronautics and Astronautics; Beijing 100083; China
Abstract:A compressive strength study of composite laminates after low velocity impact h as been conducted. The damaged area due to the low velocity impact is considere d as a circular inhomogeneity. The residual stiffness of the impacting damaged a rea is predicted by using finite element modeling and experimental data of load/ displacement. The post impact compressive strength of laminates can be obtained based on the finite element analysis and the maximum stress criterion. The es timated post impact compressive strength is in good agreement with the experime ntal results for the considered composite laminates.
Keywords:composite laminates  low  velocity impact  residual compressive strength  res idual stiffness  finite element analysis  experimental results
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《航空学报》浏览原始摘要信息
点击此处可从《航空学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号